Liczymy pasujące modele…
This is my most complex model so far. It is a print-in-place version of one of the most iconic cars ever, the Porshe 911 from the year 1974. If you have issues printing any of my designs, DM me on Instagram (…
Hey, this is a remix of KYZ-Design's amazing model. It's a Door Hinge which allows you to open a door (for example of an enclosure) 270 Degree. The door hinge consists of 2 Parts. Both of them have counterbores (according to DIN 974-1)…
Please print this model on the side… At 1:43 you won't see the VW logo but it should look like a GOLF and it has spinning wheels ! It looks nice at 0.2 in PLA with no supports. Fun fact: this car measured only 3.7 m in length and weighed…
This model is compatible with the lego system.
This model is compatible with the lego system.
Puch MV50 1974 1x M4 x 70mm stuur fixing electric wire 0.5mm2 1m All axes = PLA 1.75mm Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Puch Maxi-S 1974 - 1976 scale 1:8 Spoke rim only: without support Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 220 Filament material: PLA
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
Puch VS50 1974 1x M4 x 70mm stuur fixing electric wire 0.5mm2 1m All axes = PLA 1.75mm Velg without support Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 220 Filament material: PLA
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Das Fahrzeug ist im Massstab 1:24
Kreidler RS Cross 1974 Met dank aan Ruud Groen die deze mooie brommer voor mij geprint heeft en tevens zijn echte Kreider RS uit 1974,, op foto, ter beschikking heeftgegeven. Spoke rim only: without support Supports: Yes Resolution:…
This is an obscure and and odd part that perhaps no one will ever search for or print, but I designed it myself in OnShape because I couldn't find any aftermarket or even used parts online. Remington switched the the Outlaw model to…
“The Carnation Revolution, also known as the 25 April, was a military coup by left-leaning military officers that overthrew the authoritarian Estado Novo government on 25 April 1974 in Lisbon” ref.:…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Western Movies - Blazing Saddles - 1974 3D printable model.
This model is compatible with the lego system.
Vintage Cars - 1974 Ford LTD Country Squire Wagon 3D printable model.
The Rockford Files - Jim Rockford with Home - 1974 3D printable model.
Kolchak - The Night Stalker - 1974 3D printable model.
Honda SS50 1974 scale 1:8 Spoke rim only: without support Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 220 Filament material: PLA
Gunsmoke - Miss Kitty (Amanda Blake) - 1955-1974 3D printable model.
After our dishwasher detergent door latch broke I looked to replace the latch, only to find that the part was only sold as a assembly... A $105 assembly.... So... 30 minutes of design and 30 minutes of printing later it was fixed, and if…
The Brady Bunch - Marcia Brady - 1969-1974
Young Frankenstein - Puttin' On The Ritz - 1974 3D printable model.
Use 2x neodymium magnet diameter 10mm, thickness 2mm. No need glue, just push the magnet into the magnet hole.
This model is compatible with the lego system.
The Brady Bunch - Jan Brady - 1969-1974
MGB Mirror Mount. Typically you need to order a new mirror to get this part. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 50% Filament: EconFil ABS Black Category: Automotive
I did not want to spend $27 for a tiny roller so I took measurements with a caliper and duplicated the part. The only difference is that this is not two pieces with a clear roller over an inner ring, it is a single part. Functionally it…
Printing with BambuLab P1S, ASA Prime (AzurFilm) resolution BambuLab 0.16 strenght , supports only on bed
The Brady Bunch - Peter Brady - 1969-1974
Karcher adapter similar to 69974730 connector for garden hose 19mm (ID). Printed using PETG 0.2mm. Good to apply teflon tape on the both sides (thread, hose) and elastic band in the empty space under the thread (like the original). I've…
I made this handle for my dad's Unimog that he used on the farm. After nearly 50 years this handle finally broke. The handle is originally cast iron so I would recommend using a tougher filament. I am using PLA until it strips the spline…
Replacement for A1697420181 used in Mercedes Benz Viano / Vito. The advantage over the original part is that you can easily scale this model to fit into corroded and other wise enlarged stock holes. Ideally print in TPU since the part is…
Mirror Spacer for MGB Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 50% Filament: EconFil ABS Black Category: Automotive
NISSAN cherry E10 /Datsun 100A (1970-1974) Drink holderです。 bracketを共用で小物置きにもできます。 灰皿の部分にひっかけて、ラジオのダイヤルに差し込んで取り付けます。 ABSやPCなどの耐熱がある素材で製作してください。
lego 6990 73825 28974 4070 18986 87087 47905 26604 4733 3386 32952
Estes Explorer 1974 Nose Cone
These are some parts of a small toy bike that came in a MEGA Bloks set (set 974) my sister had. I ended up losing parts of the bike when I took it to school in grade 1 and someone snatched it during recess, so I thought I would make it up…
Staubsauger Adapter für Makita Bürstenschleifer 9741 auf Festool Außen Durchmesser 40mm - 37.5mm Innen Durchmesser 34mm - 31mm Länge 50mm Am besten in PETG oder ABS drucken damit das auch schön stabil ist Happy Printing
A plaque of the Eurovision Song Contest 1974 logo. Made to commemorate the 50th anniversary of ABBA winning Eurovision in Brighton in 1974. Made using Make My Sign from MakerWorld(makerworld.com/makerlab/MakeMySign)
A key fob of the Eurovision Song Contest 1974 logo. Made to commemorate the 50th anniversary of ABBA winning Eurovision in Brighton in 1974. Made using Make My Sign from MakerWorld(makerworld.com/makerlab/MakeMySign)
I designed this Fuse cover to replace a damaged or missing under dashboard fuse cover for 1973 & 1974 Alfa Romeo cars
This mounts between the grounding block and the desk to allow you to hang an ESD strap. My biggest gripe with these B9742s is that there's no built-in provision for this, like you would find in a bent steel grounding block such as the…
Renault Megane MK3 Sunroof Slider Repair Clip / Vibration Damper (TPU) This is a custom-designed replacement for the sunroof slider clip on the Renault Megane III (all body styles with a panoramic roof). The original plastic clips are…
The cheap replacement for A6397401535 i bought from Aliexpress came with a super flimsy washer clip that was supposed to secure one of the rods. It broke easily when inserting the rod. So here is a replacemement to save us from sending…
Rear bumper reflectors pair, 1974-75 Imperial, 1976-78 Chrysler New Yorker Bourgham. Mopar Part #3728 574 (3728574) #3728 573 (3728573). 9.6.2026: New design. Added LH part. Original designer: Chrysler Co., Detroit MI. No aftermarket part…
Broke two keys with the leg on boarding. This should protect the key.
This is a replacement lever/handle stop designed for the Pfister 974-283 and 974-285 faucet cartridges. The original part tends to wear out or snap, so I modelled a printable version that fits the spline and sits properly in the housing.…
Couvercle pour un projet de veilleuse reprenant le logo de la bière Bourbon, la célèbre bière réunionnaise. Le couvercle est interchangeable. Le log est inversé car l'éclairage vient de l'intérieur de la boite et apparait en transparence.…
A remix of the RAK19003 case originally designed by N7TRX , adapted to fit a 3000mAh LiPo battery (size 974958) . Notes: Ultra-compact: Space inside is tight, so take care when routing your cables. Snap-fit: At 100% scale, the shell snaps…
Printing guidelines: Solid infill print orientation is already set by model Use supports (Recommended) Use a brim Fitment: 1980–92 F-100 / F-150 / F-250 / F-350 1974–77 Maverick / Mercury 1972–79 Ranchero 1972–76 Torino For a complete…
Puch MV50 1974 1x M4 x 70mm stuur fixing electric wire 0.5mm2 1m All axes = PLA 1.75mm Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA
Fits on my 1989 Porsche 911 Turbo (930) and should be compatible with 1974–1989 911 (G-body cars). This includes SC (1978–83), Carrera 3.2 (1984–89), and 930 Turbo (1975–89). I can't confirm fitment for other years. Designed to fit this…
Broke two keys with the leg on boarding. This should protect the key.
Fits on my 1989 Porsche 911 Turbo (930) and should be compatible with 1974–1989 911 (G-body cars). This includes SC (1978–83), Carrera 3.2 (1984–89), and 930 Turbo (1975–89). I can't confirm fitment for other years. Print in ABS for…
Fits on my 1989 Porsche 911 Turbo (930) and should be compatible with 1974–1989 911 (G-body cars). This includes SC (1978–83), Carrera 3.2 (1984–89), and 930 Turbo (1975–89). I can't confirm fitment for other years. Print in ABS for…
Fits on my 1989 Porsche 911 Turbo (930) and should be compatible with 1974–1989 911 (G-body cars). This includes SC (1978–83), Carrera 3.2 (1984–89), and 930 Turbo (1975–89). I can't confirm fitment for other years. Print in ABS for…
Just DstarPanda's model but I put the word Ford on the front where it is on my brother's 74 Bronco
As this is an older model fridge, the part was difficult to find. I was able to find one that fitted on the right, but not the left side. This will work for both the left and right side rail, you just need to mirror it. It can be printed…
This model is compatible with the lego system.
awesome model of the famous character WrathofGod1974. enjoy a night light with my face on it. please share make. love to see it.
Rear bumper reflectors pair, 1974-75 Imperial, 1976-78 Chrysler New Yorker Bourgham. Mopar Part #3728 574 (3728574) #3728 573 (3728573). 9.6.2026: New design. Added LH part. Original designer: Chrysler Co., Detroit MI. No aftermarket part…
Fits on my 1989 Porsche 911 Turbo (930) and should be compatible with 1974–1989 911 (G-body cars). This includes SC (1978–83), Carrera 3.2 (1984–89), and 930 Turbo (1975–89). I can't confirm fitment for other years. Prints in two parts -…
I created a custom stand for the Bose model 431974 soundbar that combines simplicity with functionality. The lightweight design raises the soundbar just enough to allow cables to run neatly underneath, reducing clutter and improving…
Petrocelli - Tony Petrocelli (Barry Newman) with his 1973 Chevrolet C-20 - 1974 3D printable model.
Petrocelli - Tony Petrocelli (Barry Newman) with his 1973 Chevrolet C-20 - 1974 3D printable model.
Gunsmoke - Miss Kitty (Amanda Blake) - 1955-1974 3D printable model.
Hong Kong Phooey - Penrod Penry Pooch - 1974 3D printable model.
MOD. NSU PRINZ (1974) Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
If you use Cura for your slicer, print this at 150% size so it can fit onto a keychain.
A pencil/pen vase to keep your favorite pens and pencils, or anything else, in. The vase raises up from a saw tooth pattern to a circle. It's called a 'loft' using fusion360. Something a little different in design. It is 110mm tall and…
This model is compatible with the lego system.
Fits on my 1989 Porsche 911 Turbo (930) and should be compatible with 1974–1989 911 (G-body cars). This includes SC (1978–83), Carrera 3.2 (1984–89), and 930 Turbo (1975–89). I can't confirm fitment for other years. Print in ABS for…
Fits on my 1989 Porsche 911 Turbo (930) and should be compatible with 1974–1989 911 (G-body cars). This includes SC (1978–83), Carrera 3.2 (1984–89), and 930 Turbo (1975–89). I can't confirm fitment for other years. Print in ABS for…
Fits on my 1989 Porsche 911 Turbo (930) and should be compatible with 1974–1989 911 (G-body cars). This includes SC (1978–83), Carrera 3.2 (1984–89), and 930 Turbo (1975–89). I can't confirm fitment for other years. Print in ABS for…
