Liczymy pasujące modele…
The model is divided into 4 cards that fit most print plates. The pieces are 2.5mm thick. You can scale them up or down if you need. Once you print the cards you have to break the thin tabs that hold them together and then you can…
I wanted to try out the new Continuity Camera feature with the iOS 16 and macOS Ventura betas, so I made my own mount! This was designed around the 2021 14" MacBook Pro and the Apple Studio Display, but might fit other MacBooks and…
Remix to turn the 2 taco holder into a 3 taco holder! We lay a piece of saran wrap over the holder to keep any concerns for food safety at bay.
🇬🇷⚽ 🏟 Welcome to Piraeus, Greece! 🔴⚪ The Georgios Karaiskakis Stadium (Greek: Στάδιο Γεώργιος Καραϊσκάκης ) in Piraeus (near Athens), Greece, is the home ground of football club Olympiacos. It is named after a military commander and…
Check out everything else I've 3D printed here https://www.samhillier.co/3d-print/ Lots of stuff I've not uploaded on here yet.
I wanted to try out the new Continuity Camera feature with the iOS 16 and macOS Ventura betas, so I made my own mount! This was designed around the 2021 14" MacBook, but might fit other MacBooks. Here's the version that uses the MagSafe…
Commercial Use and Attribution Notice: ACOS Termyte Cyberdeck © 2025 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses…
Special Thanks to KB5UTY-Dave for the pics! Commercial Use and Attribution Notice: ACOS Xiao Beacon © 2025 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use,…
Commercial Use and Attribution Notice ©2025 by Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses for sale, is permitted under the…
1:12 Scale model of a psittacosaurus. The model features detailed scale and skin texturing along the model. I created two variants of the model: standing, and posed. I recommend printing it at a finer layer height or with a resin printer.…
1:35 and 1-10 scale model of a styracosaurus. The model features detailed scale and skin texturing along the model. I created two variants of the model: standing, and posed. I recommend printing it at a finer layer height or with a resin…
Another pose here . Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/minishev Patrons have access to…
Designing a low-poly Crocodile Lacoste was the best way I found to represent the poor graphics the Lacoste Logo on my T-Shirt. So, here I present you the low-poly LACOSTE! No support material is required. The model can be printed with…
TACO PRAYER - AS FOR ME AND MY HOUSE WE WILL SERVE TACOS, SALSA 24:7 Category: Signs & Logos
Here is the gcode and STL for my printed fisher price record. I simply took the “It's Raining Tacos” song and made an arrangement of it for the old Fisher-Price record player.
¡El trío infernal del bushido demoníaco – Oni Samurai Élite Pack! Diseño 100% original: tres guerreros oni únicos con piel roja demoníaca, tatuajes tribales negros, cuernos curvados grandes y ojos amarillos brillantes. - **Oni Dragón…
Dimensions: 21cm diameter 1.5mm height (0.75mm white, 0.75mm red) Filament change @ layer 4 (0.20mm layer height) Print settings: anything you like, white and red filament only!!! Print quality is bad because of wet filament. I used…
This is a 3D scan of a dinosaur figurine, it's a demo model from Go!SCAN 3D. I resized and oriented the model and smoothed the mesh a bit. https://www.3dwp.nl
A lightly armored ankylosaur from Mongolia
This is a remix of sumit_basra's awesome Continuity Camera holder with an Arca Swiss style mount. I wanted to mount my iPhone to a tripod I already have on my desk, so I did this quick remix. Please follow description in the original…
🦖 Cute Little Styracosaurus – THORNY (cartoon, noAMS) Meet THORNY – an adorable cartoon‑style styracosaurus with big expressive eyes, soft rounded shapes, and his iconic crown of long horns that gives him a unique and charming silhouette.…
Remastered version of my first model.
the styracosaurus had so many horns all over its face for defence
simple logo of the famous brand, printed multicolor with MMU3
One of two species of styracosaurus, from the Two Medicine Formation
Revised model of an iconic Centrosaurine from Late Cretaceous Alberta.
Crocodile relative from late Cretaceous to Paleocene North America and Europe.
I have a Mac Mini as my workshop computer and use it with an old Fujitsu screen. Until Continuity Camera was available I had to use my iPhone whenever anyone FaceTimed me and now I can use my Mac AND my iPhone. Fits on an old fat framed…
1/64 Chicos Tacos Diorama glue required updated with roof
Ho preso un cnc 3018 pro anche con il laser, perciò ho creato in Fusion 360 questo "PoggiaCose" per conservare posteriormente il laser durante l'utilizzo del motore e viceversa. Successivamente ho aggiunto i fori per conservare le chiavi…
Ceratopsid from late cretaceous North America.
This iPhone Magsafe holder is simply plugged onto the Mac. Now you can easily dock your iPhone and use it as a webcam. Since iOS16 and MacOS Ventura there is a new Feature, named Continuity Camera, to use the iPhone camera as a webcam for…
While MacOS folder-themed SSD cases have been done before, most rely on complex hinge structures or offer limited functionality. My design for the Samsung T7 takes a different approach. By prioritizing simplicity and versatility, it…
Second revision of a ceratopsid
Ceratopsian from the Two Medicine Formation
A case for Samsung T7 ssd in the shape of the folder icon in MacOS.
Lacoste logo Jibitz/Charm for Crocs clogs. Print it upside down, with first 1mm in green, the rest in white.
Impreso con boquilla de 0.4, pero no habría problemas en usar una de 0.6 En lo personal usé 3 perímetros para no tener relleno en las paredes. Pero no tiene ninguna dificultad.
white until 6.8mm finish with black
Dimensions: 20cm diameter 4cm tall (~2cm white, ~2cm red) Filament change @ layer 11 (0.20mm layer height) Print settings: anything you like, white and red filament only!! Few words about Olympiacos emblem: Olympiacos SFP (Olympiakos…
Fish tacos in a takeout container. Available with a side of rice & beans or fries. Created with Blender. If you print it at approximately 70mm x 72.6mm x 22.5mm, you can use a piece of 1.75 mm filament as the hinge between the top and…
Printed with eSun Silk-PLA with 35% infill
Stand for this case:
Sacos para escenografías estilo Warhammer.
Key chain of Olympiacos Fc for the 48 Championships in 100 Years
Case for a Insignia locator tag from BestBuy. Base included with and without magnets. Base without magnets is 3mm shorter than case with magnets. Pressure fit to close. Pry open with a screwdriver between the four indentations. Model#…
This is a base to hold the https://www.printables.com/model/1519908-heltec-lora-32-v4v3-slim-cases
Macropad for MacOS Native Functionalities About the Project The Macropad is a customizable controller designed to work seamlessly with MacOS native functionalities. It allows you to adjust system volume and brightness, launch…
Keyring/Plaque design inspired by "55 Burgers, 55 Fries, 55 Tacos, 55 Pies" - Tim Robinson On I Think You Should Leave. Print flat side down. No support. 15-30% infill (doesn't really matter). 0.15 layer height. 2 keyring designs and a…
About Fridge magnets that are designed to look like the window controls inside of macOS. Includes the three different versions of the „expand“-button. Magnets The parts are designed to fit a D6x3mm magnet on the back. The magnet should…
Personas con muy poca mobilidad en manos ,pueden usar silla de ruedas manual sin complicaciones.
Just a what's for dinner die but for taco lovers
Used to hold your Lacoste Glasses case onto a wall
Imprimir en TPU u otro material flexible
I made some gridifinity compatible taco shape dividers to hold awkward hand tools that take too much room laying flat, but aren't worth taking the time to model specific holders for each. 6x1/5x1/4x1 sizes available. If others sizes are…
🇫🇷 [FR] Studio 3D Figurine & Kitbash Tool Transformez votre navigateur en un véritable studio de préparation. Cet outil "couteau suisse" est conçu spécifiquement pour les passionnés d'impression 3D et les peintres de figurines.…
3D printable Lacoste logo. This design can be scaled to any size in your slicer. Printed flat with low infill (approx. 5%) to save material and time. Use it as a wall sign, desk decoration, or a personalized gift. Category: Signs & Logos
Styracosaurus — 3D Scan with the ELEGOO M1 Ultra This Styracosaurus was digitized using the ELEGOO M1 Ultra in cross-line laser mode . I captured three scans from different angles, then aligned and merged them to create the complete…
Tired of switching to your browser or Home Assistant just to see if your print is almost done? KlipperBar is a lightweight, native macOS utility that puts your Klipper/Moonraker print progress directly into your status bar. Features: 🚀…
3D printable Lacoste logo (variant). This design can be scaled to any size in your slicer. Printed flat with low infill (approx. 5%) to save material and time. Use it as a wall sign, desk decoration, or a personalized gift. Category:…
Super simple taco holder for two tacos. Print Settings: Printed in PETG, to be somewhat foodsafe Layer height of 0.15mm to reduce layer lines Printed with a brim, for good bed adhesion
About Fridge magnets that are designed to look like the window controls inside of macOS. Includes the three different versions of the „expand“-button. Magnets The parts are designed to fit a D6x3mm magnet on the back. The magnet should…
This is a base to hold the https://www.printables.com/model/1519908-heltec-lora-32-v4v3-slim-cases
🇫🇷 [FR] Studio 3D Figurine & Kitbash Tool Transformez votre navigateur en un véritable studio de préparation. Cet outil "couteau suisse" est conçu spécifiquement pour les passionnés d'impression 3D et les peintres de figurines.…
The model is divided into 4 cards that fit most print plates. The pieces are 2.5mm thick. You can scale them up or down if you need. Once you print the cards you have to break the thin tabs that hold them together and then you can…
3D printable topographic miniature of Washington D.C., Anacostia - 🇺🇸 United States Capture the beauty of Washington D.C., Anacostia 's city landscape with this topographic miniature! This 3D model represents the geographic area around…
![[ACOS] 'Termyte' Pocket Cyberdeck READ THE DESCRIPTION!](https://media.printables.com/media/prints/4b11cf42-a42a-4868-9017-494e961eabe4/images/10167135_79f69c3f-07e4-4e54-9c17-46ab987c4ca6_76c9adac-6106-44be-91b0-19612fc2fe9b/img_5446.jpeg)
![[ACOS] Ikoka Stick Beam Case](https://media.printables.com/media/prints/34675205-daa3-4daf-b19b-83b63b5cf0c3/images/10773925_0ba4b01d-fdf2-4ac4-ac9b-75aaec0a0a7b_a4386942-baa8-4498-983c-21a8bab5a29b/img_1135.jpg)
![Stand for [ACOS] Heltec V3/V4 pager case](https://media.printables.com/media/prints/442cafef-24f0-43a1-99ea-27742e743268/images/12697236_fdc2aaf7-75a2-4936-b6b2-d8722321fc55_139600ca-1022-42d6-b079-8a62fd735dac/img_20260417_224854_162.jpg)
