Liczymy pasujące modele…
Intro Earbuds Cleaning Tool V2 is a small, easy-to-print earwax remover tool for in-ear headphones and earbuds . It helps you safely remove earwax, dust and debris from your earbuds without damaging the speaker mesh . The first version…
Subscribe to find out more support free 4K Time-lapse video: Subscribe Now! http://www.youtube.com/iczfirz Very beautiful Deadpool from Eastman. Got his permission to release this MMU remix version. Sliced with PrusaSlicer and timelapsed.…
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed (use tree supports, build plate only) Scale it as you like :)
I wanted to remove the radius overhangs on the print but realised the original STEP files were exports of the STL so I've exported clean STEP files as well as made my minor tweaks. Thread was changed to GL20 thread to hopefully improve…
The Bookshelf Mountable Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a bookshelfs vertical stands ranging from 18 mm thick up to…
Organize your headphones, controller and charging cables with this unique stand featuring a built-in drawer for a clutter-free experience. Make sure to check out my matching stand for PS5 games:…
Deadpool Head Original Version https://www.printables.com/model/350015-life-sized-deadpool-head-just-the-tip Deadpool Head Surprised Version https://www.printables.com/model/350054-life-sized-deadpool-head-surprised-version Deadpool Head…
Stable Sony WH-1000XM5 headphone stand with charging cable box. The upper part is designed exactly for the Sony WH-1000XM5, but it will certainly fit on other headphones. The upper part is printed separately due to the height of the…
the screw works fine, its a bit smaller so the worse 3D printers still have a chance to print it well. holds strong , didnt fall at all, looks clean , has a little stop to hold the headphones better so they dont fall off. I prepared the…
Deadpool Head Original Version https://www.printables.com/model/350015-life-sized-deadpool-head-just-the-tip Deadpool Head Angry Version https://www.printables.com/model/350043-life-sized-deadpool-head-angry-version This version:
This is a cool face to have exposed in your bedroom or any other place, in my case I attached it to the front of my PC, so now everytime I look to the right it looks like I did something wrong o.O
hang your headphone / pověste si sluchátka na monitor ready for HP monitor 0,9cm tickness, easy to change in slicer
Turn the screw to tighten Great for thicker desks
Did you ever find yourself debating whether to buy headphones with proper noise cancelling or headphones with good cat ears support? No need to choose anymore! Now you can have state of the art noise cancelling AND superb cat ears! With…
Its made for a pair of sony headphones, but im guessing it will fit most headphones and headset out the.. Mine was printed in Jet Black PLA at 0.2mm layerheight and no support.
Deadpool riding a Unicow and it's a desk organizer!!! Three part print; main part is three colour - please see included PDF for very important additional info. Print all three parts and glue carefully together. Please hit the like ♥and…
Couldn't find what I needed so I designed my own. It will fit tables and shelves from 2cm to 3.8cm. The screw is not sized to fit right after print so make sure to either reduce its size for x and y to around 97%-98%. I just use a tap and…
Hello, I designed simple heaphones holder. There are 2 versions. First (screw version) is for every desk and you can screw it with simple screw. Second version (Ikea Bekant version) is for Ikea Bekant desk,…
My ear cushion from my Marshall Major III was very used. So I make an adapter for use a ear cushion from a Marshall Monitor II that I had. It's printed with my prusa MK3S+ in 0.2 mm and with organics supports everywhere. I have recycled…
This is a magnetic version of my headphone holder for a magnetic wall or like me the metallic table legs of my desk. Simple design with a small logo. Perfect for headphones of any kind. Happy Printing and feel free to leave a comment or…
I liked the original design but I wanted my headphones to not rub on the wall. Use the Headphone holder from the original.
This Headphoneholder mounts easily to your perforated wall using a dovetail System. The holes in my perforated wall have a diameter of 5 mm, so I used an M6 tap to fix the headphone holder. If it should have another perforated plate, I…
Recommended print settings: Material: PLA/PETG Layer Height: 0.15 mm or less Infill % : 50+ Supports: Yes Print Orientation: Default as modeled
Needed a proper angled mount to store and display my headphones. I meassured out the angle of my ceiling (see picture) and designed a sturdy 3 part ceiling mount. There are spacers in the back, for my wall/ceiling I designed the spacer to…
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) This has become one of my most popular prints, and is a “remaster” of one of my older Deadpool sculpts, that now requires no supports!
Headphone Stand by MakerBot - Thingiverse
A remix of mistertech's headphone holder with a reversed cord holder. Works on desks up to 40mm thick.
lumo · headphone stand modern minimalist headphone stand assembly important · make sure that: your filament is dry so that it deals appropriately with the tolerances your build plate is properly clean so that there aren't adhesions issues…
Inspired by nature's powerful rhythms and ever-changing dynamic beauty, this headphone stand is my abstract interpretation of the power of "waves" and "Onami". The form draws from the sweeping power curves of crashing waves, translated…
Simple but beautiful design headphone stand in two versions. (Long and shorter version) Print Settings: Layer Height - 0.2 Infill - 15% Walls - 2 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock…
headphone stand · reDesk modern minimalist headphone stand with grid patterns the base screws into the threaded stand, the tolerances are tight, so be mindful and patient and you'll be able to tighten it right into position , and will…
Headphone holder for M4 countersunk screws Model without holes https://www.prusaprinters.org/prints/16725-headphone-holder Bigger version https://www.prusaprinters.org/de/prints/43493-headphone-holder-big
Check out this Spider-Man headphone stand! 🕸 It's the perfect way to keep your desk organized and show off your favorite superhero. I'd appreciate a Like if you enjoy my work! Don't forget to visit my profile for many more cool 3D prints…
A headphone holder with a screw for tightening it to the desk. There is a version with and without a hook. The main purpose was a place to store a seperate microphone and help with cables. Hooked version needs supports on buildplate.…
Two minimalistic headphone stand designs. Both designs come in two variants, one for smaller printers where the base is detached and a full one.
Soporte para auriculares ajustable en altura No requiere ningún tornillo para su montaje, es todo impreso en 3D. Archivos 3mf incluidos, preparados en Prusaslicer y Bambustudio. La placa es personalizable. En los archivos encontrarás una…
headphone holder / headphone stand Printable without support
Update 2023-04-30 Now updated to not require any screws everything just snaps together. Old version still available if you prefer it. Original Description Universal headphone holder for use with IKEA Skadis pegboard. 4 hooks for maximum…
This unique Batman headphones stand is a perfect accessory for fans of the Dark Knight. The Batman inspired design makes the stand not only practical but also a stylish addition to any desk. It keeps your headphones safe, organized, and…
UPDATE 28JAN2018: I have added a "WIDE" version that can accommodate headphone headbands up to 55mm wide. The original model accommodates headphone headbands to 45mm wide. UPDATE: The "Long" version of the screw could grip on to a 1mm…
headphone & headset holder / stand The bottom is hollow, if you want to put something heavy in there like sand.
A simple but characteristinc design for a modern headphone or headset stand. Great to display or rest your device on your desk. Best to print in - no special settings required, standard print settings are just fine Happy printing!
This is a model I've designed myself. As the model is not behind a paywall, support is appreciated! https://www.buymeacoffee.com/Tridense Strong and practical under-desk headphone hanger Zip tie your headphone cable to the hanger for…
New Sizes!! Hang your "cans" (do people call headphones cans anymore?) on your SKÅDIS pegboard (Article Number: 903.471.72, etc). 2 new variants added with headband width in the filename: 28 mm headband 48 mm headband (the original was…
Harry Potter Headphone Stand Would make a great gift Easy to print, slots together. Use supports for the top Stands just over 20cm tall UPDATE: I have updated the top file to a thickened version that is easier to slice. The original…
Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…
Intro I have originally setup a Bambu Studio project file that has everything laid out, however, if you're not using Bambu Studio or it's printers, please refer to this image for layout, printing orientation, number of parts needed, etc.…
The file contains 2 plates, one with the head and another with the molds for eyes, the head is only one piece for easier assembly. The white part inside the eyes is a piece of fabric mesh that I bought and glued inside * Updated model,…
Modernly designed holder for headphones with clear, minimalist shapes. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL +…
18. Feb. 2024, V1.3: Mask v 1.1 for easier printing Slightly thicker walls More space between the eyes, so it can be printed more beautifully 11. Feb. 2024 V1.2: Deadpool buckle added 27. Dec. 2023: The holsters and armed hands have been…
This one-of-a-kind Deadpool headphones stand is the ultimate accessory for fans of the Merc with a Mouth. Taking the form of Deadpool's iconic mask, this stand is rendered in a sleek, all-black design that makes it a sophisticated and…
needed a quick solution to get headphones off of monitors. BOOM! move it slightly to the right. (or left if you mirror it :) My headphones have a 30mm headband, so that's what this one is made for. [find enclosed the f3d file for…
Headphone holder With screw holes https://www.prusaprinters.org/prints/15235-headphone-holder
Can be printed in any material on a printer with sufficently tight tolerances without supports. The screw needs some inital force to start turning well. If your printer tolerances are too loose, consider scaling the screw slightly.
Since this stand is pretty big I split it into two pieces which can be printed together on one plate on the Prusa i3 MK3S. The print does not need any supports when printed as setup in the “Headphone Stand Split Complete.3mf” file or if…
Simple under-desk headphone holder. Uses minimal material and is easy to attach with screws. Fits up to 30mm wide headbands. Print instructions: 3 perimeters Detect thin walls
Inspired by the elegant lines of Gothic architecture, the Gothic Throne Headphone Stand showcases your headphones in style while keeping them secure. The sturdy base prevents tipping, and the curved top preserves headphone cushions.…
Modern designed headphone holder with decentered arm. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL + Fusion 360 files for…
Headphones hanger, you adjust size of it by bolt, sometimes thread is not fitting so you need to use sandpaper and maybe some grease. You can change dimensions in freecad.
I created this model to solve an issue I frequently found in many existing headphone stand models. Other models I saw all included the hook below the actual clamping mechanism which did not really work for me due to obstructions in my…
Jedná se o remix stávajícího držáku z Thingverse. Upravena šírka plochy pro třmen sluchátek, délka šroubu a jeho závit. Pro lepší fixaci ke stolu je možné na dosedací plochu přilepit tenkou gumu. Pro tisk bez podpor je nutné držák…
Simple headphone stand Suggested print settings Add a modifier to print the base plate at 80% infill to increase the weight and stability of the stand.
Call of Duty Headphone Stand, slots together. Makes a great gift Print the top with supports touching buildplate @3DPrintBunny
Update: 2/8/2023 : Added a variant with an even stronger total load capacity by addressing the weakest bend in the first model, but you can't push it quite as far into a desk because of the curve. See “Variants” for which one to print.…
God's perfect idiot' only smaller. .12 layers with supports. Collect the all! Stan Lee Batman (1966 Style) The Joker Blade the Daywalker X-Men's Beast Daredevil
Wasn't too impressed with the selection of headphone clamp holders here on Thingiverse, so decided to make my own version. This design uses a moveable clamp protector located at the end of the tightening bolt so that when you do tighten…
Use a toothpick to attach the top crystal Make sure to add proper supports for the bow tie or use the included 3mf file Differences from the remixed model: Better looking top sim crystal, actually symmetric Fixed geometry in some places…
Combo headphone hook holder and a single SD card holder. I've originally made the hook for my Koss Porta Pros, which have a very narrow headband. Due to popular demand, I've also added a version for wider headbands. And there's also the…
Here is a statue headphone stand that was inspired by the classic marble sculptures of the renaissance. When I had the idea for this I couldn't find anything online that was similar, so I made it myself. This probably wouldn't be a good…
Now your headphones won't take up space on your desk. There's a couple of similar designs out there, but I haven't found any that would be nicely curved on the top and front, so I designed my own. There's a bit of angle so it clamps…
Hey thanks for checking this out if you like the figure, please make sure to leave a like and a picture of your creation! tolerances are tight at first but once together they will move as a normal Lego would! If you like this model check…
Wall mount/stand for an Xbox (or similar) controller, and headset. Holes are sized for #8 wood screws (which I believe should be equivalent to 4mm wood screws if you don't use freedom units). Intended to be printed on its side, but people…
So, COVID_19 has you stuck at home, binge watching Game of Thrones (again), and you need another beer (not Corona, that wouldn't be cool) so you go to put down the headphones that your wife makes you wear because she's sick of your choice…
With the screw you can adjust any desktop width up to 4 centimeters ! 3D PRINTING SETTINGS Nozzle : 0.4 (0.6 to increase print speed) Layer height : 0,28 mm min No supports needed Wall line count : 3 (it's important for the stand…
easy to print without support For every headphone
Made this for my sis to hang her headphones. A lot of hangers are great and waste less filament, but I wanted to make her something special. Holds my big MDR-Z7s no problem, you could scale down if you have smaller cans. You can fix it to…
I needed to mount headphones to the underside of my desk, so I remixed my old headphone hanger design to accommodate this new mounting requirement. This model also contains infill modifiers around the screw/bolt holes to create a solid…
****** Make sure to check out the entire clamp and rail system lineup!!****** https://www.thingiverse.com/hardline23/collections/clamp-on-rail-system Welcome to my SECOND released project for Thingiverse! I normally do more industrial…
if you are searching for the ps4 version it's finally out!! 3D TEXTURES ARE HERE!! To ensure a secure and seamless closure for your Deadpool-themed PS5 case, we recommend using a high-strength adhesive glue or premium double-sided tape .…
A desktop headphone stand. Designed to fit Sony WH-1000XM4 headphones. This model just barely fits onto the print bed of a Prusa i3 MK3. Lay the model on it's back and rotate the it 45° around the Z-axis and hit the arrange button…
Headphone holder for table No screws, no support Print settings: 8 walls 0.2mm layer 30% infill no supports Use PETG
Moai Head Keychain – Decorative Easter Island Keyring I designed and printed this Moai head-shaped headphone stand for personal use. It serves as both a stylish decorative piece and a practical stand to hold your headphones securely.…
A hanger designed specifically for the Bose qc35 ii (it will probably work for others as well)
Headphone Stand/Holder 5000 (Attachable to Table) Enhance your workspace with our 3D-printed headphone stand, designed to securely hold your headphones while keeping your desk organized. This stand is both stylish and functional,…
Headphone holder_dzino, Headphone holder_dzino2025
This is a Star Trek headphones stand. Great as a gift. Prints in two part and slots together, glue for stability. @3DPrintBunny
Baby Deadpool is my first design where I'm offering separated parts along with the usual files. Just use our separated parts, slice, and print them. After printing, fit the parts in their place. If they feel a bit loose, you can use some…
If you ever feel like you could use an extra hand to hold things for you, then you have found what you've been looking for! This sculpted hand looks extremely cool. You could mount it on the wall of a living room to hold items to display,…
This is a 3mf file painted specifically for a 4 color Bambu Labs AMS printer. Painted in Bambu Studio, my goal was to save someone else some time as I couldn't find a painted model for my X1Carbon that I like. All credit goes to Eastman…
Not much to it. It clamps onto your desk or table up to 36mm thick. Took inspiration from multiple other designs. I like the “S” shaped hangars since I won't bump into it but I hadn't seen any that have a locking screw like others so…
Hey, true believers! Ready for a free model that packs a punch? This model is a gift to our community and is designed for easy printing with a single-color 3D printer. Print him in the classic red and black, or whatever suits your chaotic…
Deadpool Collapsing Katana (Print in Place)
The model depicts Deadpool in a dynamic low crouch on a circular base. The figure appears ready to attack, with dual katanas on his back and pistols in his hands. Support my 3D Journey on Patreon! If you enjoy my models, I would be very…
Modern Headphone stand to hold and display your headphone in a stylish and modern way. Easy print that fits on 256mm beds. the stand is 250 mm tall, 80 mm wide and depth of 70mm. If you want to support future models you can join a patreon…
ALL GAMER MUST HAVE UPGRADE!!!! A Hight quality dragon on FOR BIG adjust size 24 cm Hight !!! You can mode it to lamp !!! Commercial Membership – all my models with a commercial license: https://www.patreon.com/c/BondFire
Keep your desk clutter-free and your headset always within reach with the Headset Desk Mount . This compact hanger is mounted with 2 screws under your desk, providing a secure spot to hang your headset. With its minimalistic design, it…
This is a simple wall mount for a PS5 official controller and headphones. Just print everything out of PETG (I used Prusament PETG) and glue it together with superglue. To fix it on a wall, use Mamut Glue or similar one-component glue.…
The Desk Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a horizontal desk up to 22 mm thick . It features a simple and elegant design…
![Vertical Headphones Hanger / Clamp [Kallax] [Easy to Print] [Multiple Variants] / Holder / Hook](https://media.printables.com/media/prints/663848/images/9073575_3e0a47ae-93d3-4674-baa9-523682eaa44c_2ecbe634-d193-4580-af2c-590abfc9a03b/headphone-clamp-v23-32-ext.png)
![Desk Headphones Hook [Easy to Print] [Multiple Variants] / Clamp / Holder / Hanger](https://media.printables.com/media/prints/664262/images/5232779_79e6456f-825b-420c-b549-25ccaeddc536_e9b42033-6509-4546-87ec-a2d2b3b002b1/dsc_3556.jpg)