P
PrintablesMeeKaaH
Fusion Bando V2 - Aileron medium
Ailreon pour proteger la lipo
- Pobrania
- 257
- Polubienia
- 10
- Ocena
- 5
Wyniki wyszukiwania: aileron
Liczymy pasujące modele…
P
PrintablesMeeKaaH
Fusion Bando V2 - Aileron Large
Ailreon pour proteger la lipo
- Pobrania
- 226
- Polubienia
- 11
- Ocena
- 0
P
PrintablesJumping69
Aileron Porsche Ninco 1/32
Aileron pour Porsche Ninco 1/32 Rear Wind for Porsche Ninco 1/32
- Pobrania
- 188
- Polubienia
- 10
- Ocena
- 0
P
PrintablesCirbaf
JeNo 3 mini aileron avec mini GPS FlyFishRC M10 integré
JeNo 3 mini aileron avec mini GPS FlyFishRC M10 integré
- Pobrania
- 154
- Polubienia
- 5
- Ocena
- 5
P
PrintablesHiRez99
RC Plane - Aileron Servo Tray
This is a case to install standart servo size, in side position for RC PLANE WING. Print Settings Printer Brand: Creality Printer: CR-10 Supports: Yes Resolution: 0.2 Infill: 25% Filament: Tesla Filament PLA RED Category: 3D Printing
- Pobrania
- 101
- Polubienia
- 10
- Ocena
- 0
P
PrintablesLCruz3D
Aileron Traxxas E-Revo VXL - FPV MOD
Simple design of an aileron for a Traxxas E-Revo VXL 1/16. Option for adding FPV Gear. Printed 2 of these in PLA to have a spare in case of hard hit. Haven't broken the first one yet and im testing hard. ;) I use this VTX -…
- Pobrania
- 63
- Polubienia
- 10
- Ocena
- 0
P
PrintablesTooma
Front skarkfin / Aileron avant ; Kayoudur / Kayouflip
Vitesse maxi augmentée de 80 km/h si imprimé en rouge.
- Pobrania
- 62
- Polubienia
- 1
- Ocena
- 0
P
PrintablesAurel FPV
Aileron Nazgul F5 V2
Aileron de protection de batterie dorsale allégé par des trous dans afin de lui donner aussi un design sympa :)
- Pobrania
- 51
- Polubienia
- 4
- Ocena
- 0
P
Printablesdidiersee
Charnière d'ailerons pour avion radiocommandé
Charnière d'ailerons pour avion radiocommandé
- Pobrania
- 49
- Polubienia
- 4
- Ocena
- 5
P
PrintablesTooma
Aileron avant Bando Killer
Pour Bando Killer 5" Avec ou sans support GPS
- Pobrania
- 41
- Polubienia
- 3
- Ocena
- 0
P
PrintablesBash FPV
Aileron BLS Forza
Aileron BLS Forza Light Category: 3D Printing
- Pobrania
- 39
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSaturn FPV
JeNo 5.1 Fin / Aileron
Fin / aileron for turtle mode and battery protection. Fits JeNo 5.1 v1.5 Feautres: around 5cm high attached to the upper cam spacer as well as the 4 frame screws/stand offs light weight due to skeleton design leaves XT60 hole open step…
- Pobrania
- 37
- Polubienia
- 1
- Ocena
- 5
P
PrintablesFranck G
Piratframes - Punch - Bumper Avant Avec Ailerons
Mélange de plusieurs design : Bumper inférieur + Bumper Avant + ajout d'ailerons latéraux pour le style (rien dans le FOV)
- Pobrania
- 31
- Polubienia
- 1
- Ocena
- 0
P
PrintablesLucky FPV
ImpulseRC Apex aileron bando
Aileron pour le ImpulseRC Apex
- Pobrania
- 31
- Polubienia
- 4
- Ocena
- 0
P
PrintablesJonathan_Ott
SPEC Wing aileron cutting miter box
Quick miter box to cut (with something like an X-Acto razor saw) aileron stock to the correct angle to match the sweep of an FPVWRA Spec Wing. If you do three bottom and three top layers, with 10% infill it uses ~5.95m (17.88g) of…
- Pobrania
- 30
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPrusaPilot
Rans S-21 Lower Pulley Aileron Cable Keeper
This slips over the tang on the cage of a Rans S-21 and adds lower guides to ensure the aileron cable stays in the groove on the small pulley below the seats. The little hole allows for an AN3-7A bolt. The big hole is to reduce material.
- Pobrania
- 26
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMr V
Heewing T2 Aileron Servo Trays
Materials you'll need 4 - M2.5X3.5X3 heat inserts. 2 for each tray. 4 - M2.5X6 countersunk screws. I used ASA filamet for mine. I think any higher temp filament should be fine. You'll have to cut out some foam in the wings to glue these…
- Pobrania
- 26
- Polubienia
- 0
- Ocena
- 0
P
PrintablesT_om
3.7 Gram Generic Servo - Aileron Mount
Lightweight (2.5 grams) box to hold aileron servos in a wing panel. The servos need no screws or glue, they are held in place in the box. There is a right and left version to account for wire leads. There is also a right and left top…
- Pobrania
- 25
- Polubienia
- 1
- Ocena
- 0
P
Printablesmamet pierre
ailerons pour voiture RC
compatible avec la gamme Pirate puncher et toutes les voitures t2M remplissage 0 % support : oui
- Pobrania
- 23
- Polubienia
- 1
- Ocena
- 0
P
PrintablesCyp' FPV
Aileron AIO Parallax FPV
Aileron Bando pour la Valkyrie de Parallax FPV Permet de protéger la Lipo (cnhl pizza 1200Mah 100C)
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
Printablesturbo diesel
Hobby Zone P-15D aileron servo horn
I broke the original one and couldn't buy it separately so i designed one. You will have to drill the holes after printing .
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 4
P
PrintablesPierre
Widl aileron joiner & screw adapter
These parts are joining the two parts aileron of the widl. I include the screw adpater to fix the wing to the fuselage Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.12 Infill: 100%…
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMadZ_FPV
Aileron LiPo guard Parallax Valkyrie
Aileron LiPo gaurd pour la frame Valkyrie de Parallax FPV, imprimé en TPU 95A de chez Sainsmart.
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSeb
Aileron Anti Hang-Up pour Skateboard - Anti Hang-Up Fin for Skateboard
Un petit "aileron" à fixer sous la planche de skate au niveau des trucks pour éviter les hang-ups sur coping, spine... Facilite grandement les rocks, fakie-rocks, disasters et les passages de spine. Idéal pour les enfants ou les…
- Pobrania
- 5
- Polubienia
- 1
- Ocena
- 0
P
PrintablesRémi Meresse
aileron APEX
Protection de lipo pour frame APEX, a imprimer en TPU
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
Printables
Hobby Zone P-15D aileron servo horn
I broke the original one and couldn't buy it separately so i designed one. You will have to drill the holes after printing .
P
Printables
Extreme Flight 67" Laser Aileron Plug Holder
This model can be glued into the fuselage opening. It will hold a standard servo plug (non-futaba style). I just used medium CA to glue the plug to the holder and the holder to the fuse. I printed mine out of ABS but any other material is…
P
Printables
Winglet / Ailerons - Speed Triple 1200
Ailerons pour Triumph Speed Triple 1200 RS / RR Facile à installer. S'adapte par dessus votre écope d'origine grâce à des entretoises. Winglet for Triumph Speed Triple 1200 RS / RR Easy to install. Fits over your stock air intake using…
P
Printables
Aileron Apex EVO
Aileron de protection pour la batterie pour la frame Apex EVO, imprimé en TPU.
P
Printables
aileron requin SR-5 pour turtle mode
Aileron de requin pour SR-5 pour faciliter le turtle mode. Deux tailles différentes. Print Settings Printer: Dagoma Discoeasy Rafts: No Supports: No Infill: 33% Notes: TPU SainSmart Category: Other
P
Printables
support aileron SR-5
Support d'aileron pour SR-5 pour fixer les 4 vis des moteurs ou pour des moteurs où les 4 trous ne sont pas à la même distance de l'axe. Print Settings Printer: Dagoma Discoeasy Rafts: No Supports: No Category: Other
P
Printables
Veloxity Aileron Servo Tray
The manufacturer has us using glue to attach the aileron servos to the wing but I prefer to make a tray that allows for easy removal if need be. This tray covers the large hole nicely and allows for an Imax 12g metal geared servo to fit…