Liczymy pasujące modele…
This funny egg cup man brings a smile to your breakfast table. Not just at easter. The small character holds your egg while sitting with relaxed legs – perfect for a fun and playful breakfast setup. The design prints easily and does not…
In celebration of ZombieHedgehog's birthday, I designed this waffle. He at waffles on stream to celebrate and I only thought it fitting to design something to go along with the theme! This floppy design is a little different from my other…
This is a replacement prop rod clip for a Rev Industries (OEM brand for BAKFlip) hard folding tonneau cover. It can be installed by slipping onto the end of the rail and sliding into place, or by snapping it on at the desired location. In…
One of the cable release covers broke on my BakFlip Tonneau cover. This is a replacement for it.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Made the printing surface smooth to minimize issues with first layer. Original author BreakfastDeluxe BreakfastDeluxe BreakfastDeluxe BreakfastDeluxe BreakfastDeluxe BreakfastDeluxe BreakfastDeluxe BreakfastDeluxe BreakfastDeluxe…
Look, we’ve all been there. Your egg is just sitting in a cardboard carton like a peasant, waiting to be turned into an omelet. It’s got no goals, no ambition, and it’s boring. It’s time to change that. The "Suit & Tie" Egg holder is the…
Oh no! You overslept? Don't have time to make a big breakfast before you hit the floor running for the day? No worries! Grab a piece of toast and an egg. A dear friend of mine took an interest in my recent miniatures and asked if she…
BAKFlip MX4 Truck Topper Replacement Corners. Tested in both TPU and ABS. Settled on ABS. See orientation to minimize supports. I set to minimum 5 perimeters and 50% infill. Brim required. The Front Corners are a different design than the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I recently bought some airtags for keeping track of my stuff. One thing I really wanted to keep track of was my precious Urban Arrow cargobike. I thought about attatching it to the frame, but wanted somewhere more discrete and settled on…
The Breakfast Club - The Girls Dancing - 1988 3D printable model.
Print the clip on its side with supports to the build plate. Use PETG for heat resistance.
The Breakfast Club - The Boys Dancing - 1988 3D printable model.
The model is designed to be 3D printed, upside-down, on the ring the egg will rest on - Not the legs. The design has no particular needs other than being 3D printed with like 2 perimeters and in a somewhat heat resistant material like ABS…
Tonneau cover strut retention is a small plastic clip that the cover strut snaps into during travel. REV01 added rib for increased strength. Tonneau cover is made by BAKFlip, model 448329;…
Babboe Bakfiets Wall Charging Mount A wall mounted mount to hold your battery while charging. You wil need to remove the four torx screws on the bottom of your battery, and place the charger inside the wall mount before replacing the torx…
Plastic is nice!! wood is nice! Reconciled together they are even better! You may consider yourself making nice stuff out of wood but cant afford the expensive tools or have enough room for them? But you have a 3d Printer and some basic…
For my Omnium Cargo Bike, I have developed several components that enhance the bike’s functionality. These include a front cargo rack mount for attaching a headlight, a holder for a Busch & Müller light on the saddle, a spacer for a frame…
Iconic Movie Moments - Breakfast at Tiffany's - The Kiss in the Rain - 1961
The rod support clip supplied with Bakflip covers is notorious for breaking any time it is bumped or hit and anyone that owns one has replaced them many times over. The original design holds the rod by the side with one of the plastic…
Beschreibung Ich liebe Frühstücksbrettchen, leider ist es schwierig sie nach dem reinigen zum trocknen aufzustellen, der Ständer schafft Abhilfe. Description I love breakfast boards, unfortunately it is difficult to put them up to dry…
Replacement blocks for the kickstand on the Urban Arrow cargo bike. Print them with plenty of wall loops at the bottom to make them last longer before wearing out. And use support. ------ Blokjes te vervanging van de standaard blokjes op…
Hebel für AKF Kellerfenster Kipp 2000 links und rechts.
Customized version of http://www.thingiverse.com/thing:53235 Created with Customizer!…
This is a design I have been working on that uses a standard wide mouth mason jars to create great looking food and beverage storage for your kitchen or pantry. I have also included files for the following breakfast theme items: Tea,…
I like to have Shredded Wheat for breakfast and it’s always struck me as silly to put rectangular cereals in a round bowl. So I’ve designed this breakfast bowl specifically for 2 Shredded Wheat biscuits. (But I'll hold off on hot milk, I…
Space Egg – Rocket Egg Holder 🚀🥚 Turn your breakfast into a tiny space mission! Space Egg is a fun and functional egg holder inspired by a space rocket ready for launch. Once you place an egg inside, the egg becomes the body of the…
Design Concept This model draws inspiration from the iconic Route 66, capturing the nostalgic essence of classic Americana with a 'coffee and breakfast' emblem. The retro design with a vintage car and a pin-up girl adds charm and a touch…
I love my Urban Arrow cargo bike, but I really wish it had cup holders for the kids to put their water bottles in. I designed these brackets to be strapped to the rails of the bike, and securely hold generic soft bottle holders. Bottle…
English description after the Swedish bit Detta är ett projekt som tog sin början för ett par år sedan men som har tagit lite tid att få klart av olika orsaker, nu känns det som det är tillräckligt klart för att släppa till allmänheten…
Replacement Part for Bakfiets CargoBikes
Staying at a hotel and wish to bring your breakfast back to your room? I created this tray to hold two drinks and a plate or bowl. You can stack a plate on top of a bowl. This came in very handy at a recent stay at a hotel. It allowed me…
This is a replacement drain cap for a Bakflip MK4 Tonneau cover. All of mine broke and rain would leak into the truck bed! This was specifally designed for a Ram 1500 with Ramboxes. There are 2 adapter options, one for the Bakflip OEM…
The Cheesy-Breakfast is also available in seperated Parts. Made with Fusion 360.
In 3mf file, added supports for make top and egg holder part more strong. I added obj, stl and ply files for this model but it is slightly different, couldn't find actual file (I think I overwrite the previous version). Only found 3mf…
Simple remix with TRD Pro logo. Category: Parts
EN 3D MODEL DESCRIPTION This is a 3D model of the Wakfu / Dofus character: Evangelyne. It is designed to be printed in multiple colors with a conventional printer with a single print head. Just pause at the different layers needed to…
Breakfast Club : Locker Magnet : John Bender. takes a 10mm by 3mm magnet. I may make a series. This would be the Criminal. I think the others are the athele, the princes, the basket case, and the nerd. ill see if there are any stand out…
I went to turn the mounting knobs for my Bakflip FiberMax tonneau cover for the first time in a while, and the cylindrical part of the knob that holds the threaded nut completely disintegrated with no force at all. Both knobs just fell…
I designed this waffle-shaped coaster for my breakfast beer.
What about second breakfast...? From "The Fellowship of the Ring" Pippin asks "What about second breakfast? elevenses? Luncheon? Afternoon tea? Dinner? Supper?" Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports:…
This 3D-printable clip system is designed to attach a foldable box securely and quickly to the front rack of an Omnium Cargo bike using the extender bar. The clips are mounted underneath the box, allowing it to snap onto the rack without…
This is a replacement piece for the plastic cover around the cable that you pull to unlatch the next section of the Bakflip MX4 tonneau cover. This particular model is a 2019 version for the RAM 1500 but I imagine it would work for other…
"Could You Describe The Ruckus, Sir?" - 8x3mm magnets to be glued in - 15% infill used in example If you like the design, and feel like shooting some small change, or even a buck my way, please use the donate link. A big thank you for…
Customized version of https://www.thingiverse.com/thing:3361994 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=3361994 Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No…
Probably only useful for dutch residents with a Babboe Cargo Bike, therefor continuing in Dutch. Doordat de stifthouder in onze bakfiets was gesmolten en de punten niet soepel meer bewogen heb ik dit ontworpen ter vervanging. Eerste…
Ran across villian13's design and really liked it. I have a chevy so I imported the design in to tinkercad and put a bowtie on it. Category: Vehicles
Because your breakfast biscuits always break. There are 2 versions, one to fit 2 biscuits and another to fit 4 biscuits. You need a "Big Side" and "Small Side" for a container. Currently only have pictures of the container that fits 2…
My first masterpiece (!!!) with 3D modeling software…. a lot to learn still! I tested and printed with AMS with a mix of matte and silk PLA, trying to minimize the wasted material 0.4 nozzle, 0.12mm, low waste profile, 0.40 flushing…
We recently moved to the Netherlands and a popular mode of transport is cycling. We also have 2 boys that needs to be transported, so we bought a “bakfiets”. As you can imagine this becomes relatively difficult to pedal (heavy bakfiets +…
Pictured Examples printed on a BambuLab X1C (Textured PEI) Face-down Print Settings: Initial Layer Line Width: 0.4mm Wall Generator: Arachne Wall Loops: 1 Bottom Surface Pattern: Hilbert Curve Infill: 15% (Gyroid) Initial Layer Speed:…
My wife and I love these for breakfast. They are great when you're in a hurry because you make a batch (or two) and keep them in the fridge where they last for a week. They come out best when the "dough" is packed into a form, so I made…
Size: 221x157 mm Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ eSUN Black Transmission Distance: 5.0 PLA+ eSUN Space Blue Transmission Distance: 6.0 PLA+ eSUN White Transmission…
"...And these children that you spit on as they try to change their worlds; are immune to your consultations, they are quite aware of what they are going through." -David Bowie Quote From The Breakfast Club Category: Signs & Logos
"...And these children that you spit on as they try to change their worlds; are immune to your consultations, they are quite aware of what they are going through." -David Bowie Quote From The Breakfast Club Category: Signs & Logos
No supports needed; you will need to print the yolk twice.
Start your day the Ninja Turtle way with this Michelangelo Egg Holder! Perfect for fans of Teenage Mutant Ninja Turtles, this little guy brings a whole lot of 80s energy to your breakfast routine. With his iconic orange mask, shell…
Super Glue + Accelerator Spray Akfix 705, 25 + 100 ml
Balanced Breakfast is a fun and silly balancing game. The goal is to stack all the bacon, eggs, and pancakes on top of the frying pan without the tower falling over. This game can be played solo or with a friend. Players can take turns…
Frühstücksbrettchen-Ständer für den Küchenschrank Du kennst das Problem: Frühstücksbrettchen liegen gestapelt im Schrank, rutschen ständig umher oder nehmen unnötig viel Platz weg. Dafür habe ich diesen einfachen und platzsparenden…
this is Friction rubber ball for YakFisher 1.5" Ball System print with TPU filament or any flexible material with 100% infill
Hook for hanging breakfast table from the top in the closet.
If your house is anything like mine, someone is always asking “Did somebody already feed the dogs and cats?" So I created this little sign to flip over each time I fed the animals so I could indicate to others if they were fed breakfast…
A simplistic tray dryer. I printend mine in PETG but PLA should be fine as well The scad file is pretty old and somewhat messy but it got the job done. Update: I made a slightly bigger version with larger spaces for better airflow.
What a hobbit would say. For dual color change filament at layer 11.
This is replacement feet to protect you floor from being scrapped up. Printed with a .4 nozzle, .16 setting using Overture High Speed TPU. This is a very tight fit for my stool, you may need to resize to fit your particular application.…
https://x.com/eMediaTweets/status/1876715110690931189
A large printed piece to cover the continental breakfast. After print you have to mount it, glue it down with some double sided tape, and mill it flat, so to create a proper datum to work on.
This free Breakfast Favorites cookie cutter STL includes a Toast cutter and a universal handle. The 3D print cookie cutter works as a practical baking tool for creating cookies, fondant decorations, biscuit molds, and clay projects. Ideal…
Lights for Babboe Bakfiets cargo bike. These were made specifically for the e-curve which has a 20 mm mount on the front of the bike where the factory provided lights go. The mounting bolt is hollow to allow cables to be run internally…
Supersceded I have redesigned this because it was a nightmare to print and it did not join together nicely. Please look at this instead as it prints much much better and you will be happier with the results:…
As voor de Sencys (Praxis) houder voor afplaktape + afdekfolie 1,1m x 33m
Uses an Ikea bell cloche (Morgontidig), to stack on a Drakfrukt or 4 ¾ Forenlig plant pot. It's great for keeping the cats away when growing catnip indoors. Ikea made 2 cloche sizes, this print uses the larger of the two. Both sizes have…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com You can search by the file’s reference number or simply click the preview image to open it directly. Print setup Infill: 100% (solid) Layer height: 0.08…
Keychain with text and skull on the bottom
This 3D printed storage box is designed to store items such as the Weetabix cereal sticks tidily instead of keeping them in their cardboard boxes. The box can store 2 sticks of Weetabix.
Breakfast Club Bender Coaster Set 10mm 1980s 100mm coaster holder separate file
A compact breakfast stand with an integrated holder for a soft-boiled egg, a salt compartment, and a spoon rest. Its stable design keeps the essentials organized together for serving and eating eggs.
Keeps toast crisp at the breakfast table by standing the slices up so the steam can escape, instead of going soggy in a pile. Six slots between pointed arch dividers, a taller middle arch with a hand hole to carry it, and a wide base so…
A replacement foot for 60mm wide aluminium worktop legs. 40mm (standard) and 80mm (extended) versions.
I installed a breakfast bar but found that the 60mm pole was too short so I designed this extender that slides over the pole and gives around 75mm more height.
AI and the internets says TPU is ok to cook with so.... Fail! or maybe reduce the layer from .28 to .14 and speed it up a bit. Included my toolchanger's setup via ini file. Some folks dig reading that stuff. ;) Enjoy. Category: Kitchen &…
🍫 “Nutella‑Inspired” Breakfast Set – Minimal, Cute, and Designed for Everyday Use 🍫 This breakfast set is my personal reinterpretation of the Nutella-themed kit featured in the official prize contest. It’s not a faithful replica , but a…
Sistema to-go breakfast carabiner and spoon holder attachment.
A large printed piece to cover the continental breakfast. After print you have to mount it, glue it down with some double sided tape, and mill it flat, so to create a proper datum to work on.
AI and the internets says TPU is ok to cook with so.... Fail! or maybe reduce the layer from .28 to .14 and speed it up a bit. Included my toolchanger's setup via ini file. Some folks dig reading that stuff. ;) Enjoy. Category: Kitchen &…
This is a replacement piece for the plastic cover around the cable that you pull to unlatch the next section of the Bakflip MX4 tonneau cover. This particular model is a 2019 version for the RAM 1500 but I imagine it would work for other…
I installed a breakfast bar but found that the 60mm pole was too short so I designed this extender that slides over the pole and gives around 75mm more height.
/!\ THIS IS A 3D MODEL NOT A PHYSICAL OBJECT /!\ This is a 3d model collection ready to print a Noxine and the eliacube from the anime serie Wakfu. /!\ If you need help scaling it to fit you perfectly or cutting to fit your printer,…
The Breakfast Club - The Boys Dancing - 1988 3D printable model.
The Breakfast Club - The Girls Dancing - 1988 3D printable model.
This replacement corner restores fit and function to your BAKFlip MX4 tonneau cover, ensuring secure alignment and durability. Instructions use original or any other screw to mount corner like previously. Category: Replacement Parts
The Breakfast Club - Judd Nelson 3D printable model. Super easy to print, just adjust size to your needs and go!
Breakfast at Tiffany's - Audrey Hepburn - 1961 3D printable model.
/!\ THIS IS A 3D MODEL NOT A PHYSICAL OBJECT /!\ This is a 3d model collection ready to print a Noxine and the eliacube from the anime serie Wakfu. /!\ If you need help scaling it to fit you perfectly or cutting to fit your printer,…
The Breakfast Club - The Boys Dancing - 1988 3D printable model.
BakFlip release handle Print with PetG for heat resistance 20% infill Print two to make one handle Use scrap 1.75 filament as Dowel Rods Dowel Rods are 4mm x 7 and 6mm x 3 cuts Use super glue may not need clamps when glue is drying…
