Liczymy pasujące modele…
These are needles that are designed to be used as nalbinding tools but they could probably reasonably work for darning, weaving, or whatever else you'd use something else like this for. There are four sizes--3 inch, 4 inch, 5 inch, and 6…
Sculpt of a second-generation albinauric from Elden Ring, sculpted in ZBrush. Credits to Charro Zuck for the photography, printing, and pre-supporting, and the Elden Ring character design team for the design. If you like it, please check…
Bez podpěr. Pro lepší stabilitu lze na spodek vlepit podložku (maximální rozměry podložky: průměr 43 mm, tloušťka 4 mm)
Celkový rozměr 245 * 196 * 120
Albi Magic reading Electronic pencil. This is a binder for different sizes of books and old and new pencils.
see title. May need to split in 2 or more pieces to print on a normal sized printer
Albi Bang! box storage and dividers. I was looking for some good dividers and storage box for card game Bang! and I couldn't find any nice looking. So I found Rugged box, which I am now using as storage for nearly everything and created…
stojánek slouží jako držák chytrého pera a knih
Simple print in place Brighton and Hove Albion Logo.
This is my first time ever to design a 3D Printed parts. Hope you'll like it
Stojánek na Albi tužku - zjednodušené dno. Originál házel ve sliceru chybu.
Základna pro chytrou tužku Albi 2.0. Usnadňuje skladování i nabíjení chytré tužky. Tisk bez podpěr. Base for the Albi 2.0 smart pencil. Makes it easy to store and charge the smart pencil. Printing without supports.
Farm Animal - Exotic - Albino Buffalo 3D printable model.
Some people wanted this instead of plain boss holder.
Podstavec s kameny pro bosse a jeho stráž do hry Karak 2. Doporučuji tisknout dvoubarevně. Tisknul jsem na MK3S+, 0.20 Quality, PLA Galaxy black a silver.…
Einhorn Ausmalbild für Kinder / Unicorn Coloring Page for Kids
dlhsi priestor na knizky ma 242 mm kratsi priestor na knizky ma 190 mm priemer pre pero ma 24 mm Celkova velkost modelu 250x230 mm Tlacil som to z petg od spectrum - bloody red 3 perimetre s 20% infill Dva modely - jeden ma meno Marínka,…
My Fanwork to H.P. Lovecrafts Albino Pinguin. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
Ein optimierter remix der Ikea Samla Deckel Clips. Ich habe ihn auf ca. die Hälfte gekürzt, aber so, das die Scharniere sinnvoll für maximale Stabilität geteilt sind. Gedruckt mit Amazon Basics PETG. Das Filament sollte kalibriert sein,…
this is a one piece coasters i have created a complete series of coasters about one piece don't forget to see the rest of the models and leave me a like thank you CUB SOCIOS: https://www.printables.com/@tecnoculebras#join:484 PATREON:…
a little rectangle box with hidden message inside. appears when its hit with light from the back. This is a cool concept i thought of for hiding names in personal belonging. you dont want people knowing your personal info but want to show…
Holder for up to 4 electronic Albi tolki pens. Shape inside is derived from our experimental 3D printed rocket, just reversed :) Follow our Kosmopark account at Tinkercad and we will add gradually all interesting here to Printables.…
african albino woman bust
The Seagulls! One of the most boring crests in sports. Concave version, letters are sunken. There is a convex version too. Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can…
Petri dish stand for a variable scientific kit.
Stand for 14 large ALBI books, 2 small books and ALBI PEN. Idea is from web, design is mine.
The Seagulls! One of the most boring crests in sports. Convex version, letters are raised and top layer. Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a…
The logo of one of my favorite games - Albion Online)
Test tube rack for a variable scientific kit
Im beginner in 3d modeling, this is my new model, i find it perfect, hope u too
white until 4.8mm green until 5.2mm brown until 5.8mm red until 6.2mm blue until 6.8mm finish with black
Beermat featuring the French Dog drawn by Pete Doherty - from the cover of Down in Albion by Babyshambles. Created in Fusion 360 for my MMU2. This is printed 95mm x 95mm x 2mm For plenty of other multi-colour beemats, go here:…
Cube plugs for a variable scientific kit.
Jednoduchý insert pro hru Chytré kostky. Insert se skládá z dílů na kostky, žetony a karty a dále obsahuje dvě výplňové krabičky - pod kostky a žetony, aby v krabičce nic nelítalo a zároveň se neplýtvalo materiálem (v krabičce jsou…
This is 3d model of battle axe from albion online
Meet Albie the Alpaca , a cozy little figurine inspired by the gentle charm and fluffy appearance of alpacas. With his curly wool, calm expression, and relaxed sitting pose, Albie radiates warmth and friendliness. His rounded shapes and…
Tool zum halbieren von Poolnudeln, um diese z.b. an der Garagenwand als Puffer zu montieren etc. Benötigt wird noch ein Einwegklinge für ein Cuttermesser. Das sollte neu und daher scharf sein. Passender Wandmontageclip für die halbierte…
This is my albion online inspired greataxe)
Herní organizér k uložení a třídění Albi pexesa. Vytvořen tak aby pasoval do krabičky a nemohlo ani při transportu dojít k pomíchání jednotlivých komponent. Je potřeba vytisknout 2x pro uložení obou kopií herních komponent. Game organizer…
Albine golden dog (you can make it with any color). You can print a base for it.
Tento stojan obsahuje verzi, když máte Albi tužku bez obalu anebo s obalem. Na fotce je tužka s obalem. Dále je třeba nutné vytisknout kladivo, které se zasune do jedné ze dvou verzí.
Just recently my attention was called to the plight of the soft-pawed albino stoat of southern Wales. I implore you, please eat Stoat cookies made from soy-Stoat substitute rather than this gentle over-hunted and endangered ermine.…
Montageclip zur Wand- Deckenmontage für halbierte Poolnudeln. Als Türpuffer z.b. für die Garage etc. Passender Poolnudelhalbierer unter https://www.thingiverse.com/thing:6614722 Category: Parts
Control your AlbiLab remotely with ESP8266 and code from GitHub . Wi-Fi connectivity enables remote control with full compatibility with AlbiLab and secure access just for you. You can control sensors, collect and monitor data, or…
Did you lose or damage one of the stabilizer fin holders on your ALBI Space Jet Rocket? You don't have to look for a replacement anymore! I created a 3D model of a replacement holder that you can easily print on a 3D printer. This model…
with until 2.8mm finish with blue
Přihrádky na žetony do deskové hry Pivo a Chléb od Albi . Tisknuto z PLA Prusa Galaxy Black, lepší by byla barva hnědá, ale neměl jsem. Při tisku jsem použil límec, aby se mi nezvedali okraje. Jinak je to na každém podle zkušeností.
For perfect size grind off a little bit of the longer site.
Fits the following wood boilers: Albin Effekt 230 Albin Effekt 235 Albin Effekt 425 Albin Effekt 720 Albin Effekt 725 Albin Villacombi 725. Albin Specialcombi 425. Please don't print this 3d model directly and put it in your boiler, you…
Podstavec s kameny pro bosse a jeho stráž do hry Karak 2. Doporučuji tisknout dvoubarevně. Tisknul jsem na MK3S+, 0.20 Quality, PLA Galaxy black a silver.…
stojánek slouží jako držák chytrého pera a knih
dlhsi priestor na knizky ma 242 mm kratsi priestor na knizky ma 190 mm priemer pre pero ma 24 mm Celkova velkost modelu 250x230 mm Tlacil som to z petg od spectrum - bloody red 3 perimetre s 20% infill Dva modely - jeden ma meno Marínka,…
Meet Albie the Alpaca , a cozy little figurine inspired by the gentle charm and fluffy appearance of alpacas. With his curly wool, calm expression, and relaxed sitting pose, Albie radiates warmth and friendliness. His rounded shapes and…
I have attached a Fusion model that is precisely designed according to the measurements. However, when printed on the MK4S, the result was slightly different, mainly due to bridge printing. After enlarging the openings by 1mm, the printed…
Enhance your AlbiLAB scientific station with a custom-designed 3D-printed lid featuring an integrated holder for a float switch and water pump. This bespoke accessory facilitates precise liquid level control, optimizing your experimental…
Opaque 3D-printed cover for the AlbiLab box, designed for easy printing and compatibility with the original device.
There are two holes on the project that are used to attach the circuit board with screws.
I designed Kids walkie talkies stand. You can choose version with or without Albi pencil (1.generation). It all walkie talkies with dimension up to 50mm x 30mm should fit inside. You can also use bigger, but then you have to resized in…
There are five holes on the board, the big hole is for ventilation and the four holes are for screws.
This model is specifically designed as a shade cover for the Albi Lab. To print it successfully, you'll need the MMU3 , a hardened nozzle , and magnetic filament like Prusament PETG Magnetite 40% Grey. The MMU3 is essential because it…
Let's dive the pump all the way down! And the level probe with it!
For this model, I used the following filaments: PLA Conductive filament Proto-Pasta Prusament PETG Magnetite 40% Grey and PLA. I used an Arduino ESP32, code here
When you need it to be dark inside the box, but sometimes want to take a look inside, now you just slide the lever. The entire mechanism is fully 3D printable, without supports and designed so that everything happens on the inside. This…
Just for the case, when the younger sibling is not old enough to have the real one, but desperately wants one :)
248x226 organizer for Albi pen (v2 model) and magic books. Easy printable. 3 Walls recommended.
3D printable topographic miniature of Langnau am Albis - 🇨🇭 Switzerland Capture the beauty of Langnau am Albis 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates…
Little Gree Army : Princess Bride : The Bad Guys : Humperdinck, The Albino, Six Fingers.
https://ozon.ru/t/q4pEivG это ссылка на эксцентрик. для такого размещения спинакергика необходимо изменить кольцо крепления фото смотрите ниже диаметр кольца 55мм снаружи толщина 8мм
Fantasy Art - Dragons - Albino Woodland Dragon 3D printable model.
Stojánek na Albi tužku 2.0 v designu "dětské" tužky. Stand for Albi Tolki pen 2.0 in the design of a "child's version" pencil.
Waves for u-benchy by TheAlbinoGiraffe ( https://www.thingiverse.com/thing:2943645 ) The u-benchy i've printed 30% scaled, 0.25mm nozzle with 0.05mm layer height, the waves are printed with 0.4mm nozzle, 0.1mm layer height and 15% gyroid…
The stand for Albi pencil, for better stability, you can attach it from the bottom with double-sided adhesive tape.
