Liczymy pasujące modele…
The perfect stand for the Aneng 622B on your desktop. In the version in photo, the upper Probe clamp is present. In the STL there is also a lower clamp to give the probes more stability. Print this stand on the left side with 20% infill…
Using hooks from https://www.thingiverse.com/thing:2853261 Category: Organization
A simple soulution to hold one or two multimeters, designed for ANENG 8008, 8009 and alike. Ideal to keep the meters in view and stable. Most likely to fit any multimeter with some scaling. Recommended to print in PETG material with 0.6mm…
I wanted a nice stand for my smart multimeter i added a single piece of tape inside to make it hold the multimeter inside and stop it from rattling.
About Remix of Aneng Multimeter stand, added 2x2 gridfinity base with magnets and a box on the back to keep probes in it add magnets and it will be even more stable added version with more ‘flat’ angle for better reading the screen,…
Gridfinity box 1x5 for Aneng A3007 and A3008 multimeters. Negative probe & cable store under the meter, tucked neatly out of the way.
A holder for a ANENG 683 smart multimeter with holders for the test leads. Print suggestion: 0.20 to 0.28mm layer height 15% fill
A Case with Locking Lid for the Aneng A3005 Multimeter Pen (I'm sure other models would fit, but only have the one so can't confirm)
Case for Aneng A3006 remixed from lower model, came out rally good case printed with yellow Sunlu PLA inserts with Sunlu PETG Six M3x20 screws required to assembly it. Thank you
ANENG SZ02 multimeter holder on the wall honeycomb
Aneng 620 multimeter holder for honeycomb storage wall (maybe aneng 681 and others) it will fit a multimeter with dimensions at bottom 22mm x 75mm
Used https://www.thingiverse.com/thing:4491299 wall stand for Aneng Q1 to remix a desk stand for my multimeter
The Box and Inserts are designed to hold an Aifen A11 USB Solderpen, Aneng A3008 Multimeter and various other Tools as shown in the Pictures. The Box is based of the Rugged Box with a size of 100x200mm. For the latches and hinges you need…
This inserts should be use with Rugged Box Parametric V2 model made by @Whity Rugged Box Parametric V2 parameters: InnerBoxDepth 160.4 mm (or 160.2 mm if you printer has hight accuracy) InnerBoxWidth 160.4 mm (or 160.2 mm if you printer…
IKEA Skadis multimeter holder for the Aneng AN8009 Multimeter link to in on Aliexpress . Uses the T-Nut system so print 2 nuts to mount the model to the board. No supports needed. BOM: x2 - M2.5 DIN934 Hex Nut x2 - M2.5 DIN7991…
A 2x1 Gridfinity battery tester holder for the Aneng 168Max bought from Aliexpress
Aneng M167 multimeter holder. Easy to create for printing without supports. Use for honeycomb. Fixing with screw and M4 nut with countersunk head. Multimeter purchased here.…
The Aneng AN8002 is an excellent meter for the price, but the hard plastic case is slippery and it doesn't offer much protection from falls. So I designed a boot for it. I expect this will also fit the AN8008 and other similar models from…
This Thing is to organize your multimeter. As you see the multimeter comes with a lot of accessories. When you need them you need to search for it, loose time, loose patience. This Thing has all accessories in one box (even the little…
This is an insert holder for an Aneng Electrical Clamp Meter. It was designed in Fusion 360 using the Gridfinity add-on for Fusion 360. I have included the box label insert as well. The clamp insert is a 2x5 grid insert for the meter. The…
Gridfinity holder (2x4) for the aneng AN8008 multimeter. I have printed it with 0,3mm Layerheight - everything fine.
Just a remixed wall holder for the nice Aneng Q1 multimeter. Holes for screws or just double tape to wall.... This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/i6HLGZI6jHI Print Settings Printer: Tronxy…
This is a mount for the multiboard system, specifically for the AN8009. You can store probe wires as well as the temperature sensor for the meter in this nifty little box. To connect to the multiboard itself I used two Snap.stl prints,…
The provided stand that pops out of the case started losing its rigidity and wasn't stable anymore, so I created this to have a stable stand for the multimeter for my desk. It uses the probe slots of the case to keep it in place. I can…
A remix of angry Owl's Aneng multimeter boot with probe holders. Printed in Overture's Orange TPU
Wall mount for Aneng Q1 | https://aliexpress.ru/item/33004794265.html
Quick print improving long product life which is ANENG AOS 02 oscilloscope. Not everytime oscilloscope function is used. Sometimes we are using only multimeter functionality on for example dusty field or contaminated environment. That's…
Remixed to fit the DM850 and similar sizes.
Original was made for the ikea pegboard, decided to remix it and make it for the multiboard system. Use with the Multiconnect system! I've uploaded one of their designs as well for attaching it to your multiboard (credit to @David D).
Prints without support, since Baeoniq's SKADIS template included support in the model. Apologies for the restrictive licensing, it came from the original models.
Bracket/holder to mount your Aneng 683 Pro Multimeter (in its case) on your Skadis board. Uses the very excellent t-clip system by Line Arc Line (from here ) - you'll need two of the t-clips depending on your style of Skadis board…
This mod was created because the original model is theoretically printable , but practically problematic . The goal was simple: make it print the way it should have from the start .
Bench Stand for Aneng Smart Multimeter 681 The multimeter is not supplied with a rear stand, as is normal, so I designed this small stand for it. Printed at 0.2mm with PLA. I've included a STEP file as well as an STL so alterations, if…
There are two versions of the model. The original-fit version is based on the standard Skadis Universal Mount and has looser tolerances. The tight-fit version uses tighter tolerances, so it grips the Skadis board more securely and stays…
I've just chamfered the original model from @MrMeowz_3317061. And added a space for labeling the case
Case for ANENG AN8008 with leads. Designend in tinkercad. Print Settings Printer: AM8 Rafts: No Supports: No Resolution: 0.2 Infill: 15 Filament: NA PLA Category: Organization
Quick print that allows us hang multimeter with attraction of the magnetic force :D This is very usefull while working with on field and measuring with two hands. With this model you can hang you multimeter on any metal part. You can use…
This is a Skadis holder stand for Aneng AN8009 and similar multimeters and their probes. Free to distribute.
V2.0: Now with improved hinges that are a lot stronger! Trust me! Have you ever had the problem that your camping trash bag is all wobbly and collapses as soon as you want to dispose a banana peel? Do not be afraid, I got you covered!…
Its not optimal to print, multiboard pegs need to have support, but it work fine.
couldn't find a case that I was sure this meter would fit into so made this one. The multimeter is from Ali Express. Main compartment internally is 67.5mm x 39mm with the holes for the probes having a 10mm diameter. printed with 2 walls…
Just a gridfinity box for my multimeter, with space to store the probes, and holes to make it possible to use it without removing it from the box.
This model is designed to hold ANENG AN8008 multimeter for Gridfinity organizer system . It has cutouts for easier access of the multimeters when trying to grab them, slot for attachments and small sign of electricity to indicate what the…
Box for ANENG GN102 Digital Noise Meter 30-130dB Sound Level MeterBox for ANENG GN102 Digital Noise Meter 30-130dB Sound Level Meter
ANENG BT138 Battery Tester Box Protection for my new battery tester. Since I wanted a battery tester without its own power supply (battery), I purchased the ANENG BT138. The battery tester display would probably get scratched quickly in…
Tray for pen multimeter Aneng A3006 Thank you
výřez pro ST 212 byla super, bohužel výška boxu je nedostatečná, nelze nastavit do výšky další box. Proto jsem udělal remix. Foto původní a nová verze vedle sebe. Nová verze pro gridfinity 6U
Я не вмію моделювати, тому використав готову модель і підігнав під мій ANENG PN200
A simple wall holder for Aneng BF01 with two screw holes
A Gridfinity storage bin designed to fit the Aneng AN8008 compact digital multimeter. The recessed profile ensures the meter stays seated during drawer movement, protecting the screen and dial. This low-profile holder makes it easy to…
the first file is the one pictured. "Sleeker" version is just thinner and matches the contours a bit better but I didn't print it so who knows, something could be wrong. FreeCAD file included for the sleeker version, might require the…
Standing up on the long edge, so it fits in the drawer but anyone in the house can grab it quickly. Deliberately went fast on this & didn't accommodate the curve, but it sits just fine in the bin. Have included the Python parametric…
This is a protective cap made specifically for the ANENG GN703 Smart LCR Tester . This model: https://s.click.aliexpress.com/e/_c3GaMIiL It securely covers the tweezer measurement tips, protecting them from accidental damage, dust, and…
A Aneng 622B stand that works off of the battery cover.
If you own an ANENG M118A pocket multimeter, you know how handy it is. I scanned this unit to design a custom workshop holder and thought the community might find the 3D mesh useful for their own DIY projects (cases, brackets, or desk…
Gridfinity holder (2x4) for the aneng AN8008 multimeter. I have printed it with 0,3mm Layerheight - everything fine.
Case for Aneng A3006 remixed from lower model, came out rally good case printed with yellow Sunlu PLA inserts with Sunlu PETG Six M3x20 screws required to assembly it. Thank you
ANENG BT138 Battery Tester Box Protection for my new battery tester. Since I wanted a battery tester without its own power supply (battery), I purchased the ANENG BT138. The battery tester display would probably get scratched quickly in…
Just a gridfinity box for my multimeter, with space to store the probes, and holes to make it possible to use it without removing it from the box.
Prints without support, since Baeoniq's SKADIS template included support in the model. Apologies for the restrictive licensing, it came from the original models.
The Aneng AN8002 is an excellent meter for the price, but the hard plastic case is slippery and it doesn't offer much protection from falls. So I designed a boot for it. I expect this will also fit the AN8008 and other similar models from…
