P
PrintablesPhilip
Sodastream CO2 Gasbottle holder
You only will need some M3x40 screws.
- Pobrania
- 230
- Polubienia
- 55
- Ocena
- 5
Wyniki wyszukiwania: asbo
Liczymy pasujące modele…
P
PrintablesNoreva
Sodastream Glasbottle Drip Cradle
Changed design for the shown bottles.
- Pobrania
- 226
- Polubienia
- 18
- Ocena
- 0
P
Printablesbeekeeb
A minimal case for dasbob keyboard
Required parts M2 * 4mm GB823 screws M2 * 2mm (height) * 3.5mm (OD) brass heat set threaded inserts DASBOB keyboard created by GroooveBob: https://github.com/GroooveBob/DASBOB This model is licensed under a Creative Commons (4.0…
- Pobrania
- 195
- Polubienia
- 19
- Ocena
- 5
P
PrintablesPhilip
Sodastream CO2 Gasbottle Holder 2nd Edition
The first gasbottleholder needs screws. This version is slightly different and do not need screws. Some bolts holds everything in place. If you feel better, you can glue them together.
- Pobrania
- 156
- Polubienia
- 18
- Ocena
- 4,67
P
PrintablesDLQFPV
DJI O3 ASBOX Canopy (toothpick canopy)
I designed this canopy for Dronarchy so he could fly the DJI O3 in DLQFPV and MambaFPV ASBOX frame. Print in your favorite TPU. When you are ready to install the VTX just run some hot air over the Canopy to make it slightly more pliable…
- Pobrania
- 144
- Polubienia
- 7
- Ocena
- 0
P
Printablestwalker2k
A simple case for the DASBOB keyboard
The case is a snug fit, with only 0.2mm offset from the DASBOB PCB. Layer height: 0.2mm or less Filament: PLA or PETG Required parts M2 * 4mm GB823 screws M2 * 2mm (height) * 3.5mm (OD) brass heat set threaded inserts This model was a…
- Pobrania
- 98
- Polubienia
- 23
- Ocena
- 5
P
Printablesthonem21
Sodastream Gasbottle Holder (wall mount)
Here you will find a holder for the Sodasteam gas bottles. This bracket can be attached to the wall. Have fun with it *Update: I made a Version 2 where the screw mounts are inside the frame
- Pobrania
- 73
- Polubienia
- 9
- Ocena
- 5
P
PrintablesDaddyWazzy_TheCreator
Racing Club de Strasbourg Alsace coaster or plaque
"Le Racing" or "Le RCS" or "Les Bleu et Blanc" Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque Red till…
- Pobrania
- 65
- Polubienia
- 7
- Ocena
- 0
P
PrintablesDaniele
DASBOB - Redux edition
I wanted to create a totem inspired dasbob case. Top and Plate are mirrorable to print left side, base cannot be mirrored. While this is not technically a remix, it's heavily inspired by…
- Pobrania
- 56
- Polubienia
- 12
- Ocena
- 0
P
PrintablesMartin_au
Smorgasbord Build Sheet Holder
A low profile build sheet holder. Holds 8 sheets in only 43mm of depth, with all sheets being easy to identify and remove. Uses a pair of 8g flat head screws to mount.
- Pobrania
- 54
- Polubienia
- 18
- Ocena
- 5
P
PrintablesZaros
Racing Club Strasbourg
Logo du racing club de strasbourg, avec de quoi mettre un prénom dessous
- Pobrania
- 40
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDLQFPV
ASBO XL and XLR TPU Parts
A collection of Parts for the ASBO XL and XLR drone frames from DLQFPV and MambaFPV. All 3mf files have been plated as I print them. I am also including STEP files of some parts for modification and remixing. Please feel free to share…
- Pobrania
- 39
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDLQFPV
ASBO X Canopies
I have designed some alternative canopies for the ASBO X. Take your pick if you would like to customize your craft. Check out https://dlqfpv.com/collections/frames/products/asbo-x if you would like to pick up a frame.
- Pobrania
- 39
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDLQFPV
ASBO DCJ5 TPU Parts
Introducing the ASBO DCJ5, a deadcat 5-inch drone engineered specifically for the thrill of the chase! Brace yourself for an unparalleled cinematic experience as you effortlessly capture mesmerizing close-up shots, all while banishing any…
- Pobrania
- 38
- Polubienia
- 2
- Ocena
- 0
P
PrintablesZefiryn
DasBob keyboard tenting
I really loved A simple case for the DASBOB keyboard which fits perfectly with the pcb. However the tenting in that model was too bulky for my taste so I designed new from scratch. I printed on Bambu A1 with BambuLab PLA Silk 0.4mm nozzle…
- Pobrania
- 32
- Polubienia
- 4
- Ocena
- 5
P
PrintablesDLQFPV
MambaFPV ASBO X Analog Canopy
This is a remix of Ledronclubs toothpick canopy for 14x14 cameras. Made thicker in meshmixer and added height. Specifically to MambaFPV's specs for his ASBO X 3 inch frame. https://www.thingiverse.com/thing:3499430
- Pobrania
- 28
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJulianB
Gasbottle holder for 5kg gasbottles
I constructed a holder for strapping my 5kg gasbottle in my RV down. It can be screwed down and fits strap with 2,5cm width. No Supports needed.
- Pobrania
- 25
- Polubienia
- 1
- Ocena
- 0
P
PrintablesElouan
Strasbourg Cathedral Line
Just simply Cathedral of Our Lady of Strasbourg Line
- Pobrania
- 23
- Polubienia
- 5
- Ocena
- 0
P
PrintablesDLQFPV
ASBO XL and XLR O3 Parts
Parts for the O3 and ASBO XL remixed by MickyFPV
- Pobrania
- 22
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDLQFPV
ASBO XLR TPU Parts (TS13FPV)
A collection of Parts for the ASBO XL and XLR drone frames from DLQFPV and MambaFPV. These parts are designed by team pilot TS13FPV. Please feel free to share your remixed print files to help grow the ASBO line of tough frames. Buy the…
- Pobrania
- 21
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDLQFPV
ASBO Mamba No5 TPU parts
MambaFPV came to me at Christmas of 2023 and asked if 2024 could be the year he gets his own signature frame. Well, it's been a bit of a journey to get here, but here we are, October 2024, and we are ready to release the ASBO Mamba No. 5…
- Pobrania
- 20
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDLQFPV
ASBO XLR TPU Parts (Daddy Loves Quads)
A collection of Parts for the ASBO XL and XLR drone frames from DLQFPV and MambaFPV. This collection of parts is specific to Daddy Loves Quads spec version of the ASBO XLR. Please feel free to share your remixed print files to help grow…
- Pobrania
- 19
- Polubienia
- 0
- Ocena
- 0
P
PrintablesStarlord
Lockout Gasbottle
Lockout for Propan / Butan gasbottles. Printed in PETG. Made for valvediameter of 41 mm. Created two versions for different positions of the lock. Made for lock bar diameters till 6.5 mm.
- Pobrania
- 13
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMarkusMichalski
Sodastream Glasbottle Opener
It's really hard and difficult for my mom to open the black top of the Sodastream glasbottles. So I made a simple helper to open the bottles. I printed it with PETG and 15% infill. Nothing fancy but it works.
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
Stade de la Meinau-RCS-Strasbourg
Stade de la Meinau-RCS-Strasbourg Ce modèle est gratuit pour un usage personnel. Si vous aimez mon travail et souhaitez me soutenir, vous pouvez m'offrir un café via le lien sur mon profil ou directement avec PayPal :…
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
PrintablesThe Barça Guy
RC Strasbourg Alsace Logo Coaster or Plaque
white until 5.8mm light blue until 6.2mm red until 6.8mm finish with dark blue
- Pobrania
- 10
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDLQFPV
ASBO XL Naked GoProHero 8 mount
Team ASBO pilot Go_Nuts_FPV remixed this GoPro mount for use with a Naked Hero 8 in the vertical orientation. Print in your favorite TPU. If you have an ASBO X or XL I would love to see your prints. upload and tag us.
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDLQFPV
ASBO Mamba No5 TS13 Prints
ASBO Mamba No5 prints designed by TS13 Get your frame here: Mamba No5
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBalázs Merőtey
DASBOB-clipon_case
Tool less case for DASBOB split keyboard. Layer height : 0.16 mm Recommended material : ASA, Pet-G My print material was ASA but Pet-G should work too. I'm not sure about PLA but I think it would be too rigid and it more likely to cause…
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
PrintablesPeopleware
Reparaturset Einlege Glasboden für Kühlschrank B/S/H Siemens KA58NA70 04
Ermüdungsbruch der Einlegeböden der B/S/H Side by Side Kühl/TK Kombis einfach repariert Bei meinem American Side by Side Kühlschrank KA58NA70 04 von Siemens sind nach 10 Jahren alle großen Böden an den Ecken angebrochen, teils sehr…
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printables
RC Strasbourg Alsace Logo Coaster or Plaque
white until 5.8mm light blue until 6.2mm red until 6.8mm finish with dark blue
P
Printables
Racing Club Strasbourg
Logo du racing club de strasbourg, avec de quoi mettre un prénom dessous
P
Printables
A minimal case for dasbob keyboard
Required parts M2 * 4mm GB823 screws M2 * 2mm (height) * 3.5mm (OD) brass heat set threaded inserts DASBOB keyboard created by GroooveBob: https://github.com/GroooveBob/DASBOB This model is licensed under a Creative Commons (4.0…
