Liczymy pasujące modele…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Toto je na uchovávání flash disků typu A. Velikost: 0.05 m/0.083385 m/0.025 m. Print instructions bez podpěr.
Bumper car felt like a perfect fit, given the Crash Derby game description, so i designed this one. It matches the size of the original models and reuses the same base. Easy to print with no supports. Comes with the original base and the…
A simple shelf to keep your flashdrives and sd-cards in reach
There are also holes for 3mm screws from under to attach to grids or tables
Prints nicely in PLA, no supports needed. Since it's kind of large, I used glue stick on the print bed to make sure the corners didn't lift during print. Fusion360 file is included if you want to store more or less sticks (adjust User…
There is a version that features a slot at the front for a USB flash drive or for your own adapters. An adapter has also been created for the Raspberry Pi USB flash drive adapter.
The usb body has the dimensions shown in the image (approx). The fit works well and you can print the cap with or without a key ring hole. Use glue.
This thing is a Washdown Hose Holster for a milling machine. I created this for a Haas TM1p but it should work for about any machine. The earlier TM1's are not equipped with a washdown hose. The Haas hose kit with nozzle and holster…
I have old 1GB flashdisc what have full metal flat and slippery casing, so i made this grip what make posible to remove him easly from usb port. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.15mm…
Printing instructions Base & Chassis - print without supports Hood - print with organic supports
Malý držák flešky od Creality
Just a simple flashdrive case made in tinkercad
Can be printed with minimal supports and in white filament. I used a Raise 3D printer and then used a FormLabs for a final draft part but can still be printed normally. Not toleranced so minor sanding may be required after printing. Using…
I get these on an event, the classic wooden cased usb pendrives that broke just by looking at it. So I make a slim case because I'm a hoarder. You'll need a little bit of hot glue to keep it in place. Category: Electronics
This model solves trouble with slippery surface of flash disk for prusa mini 3D printer. Moreover, I tried out the new Prusaslicer 2.4.0 function - indented / notched outer surface.
A little print-in-place case to forever customize your Kingston flash drive sp that your neighbor will give it back.
Keep your flashdrivers in one place
Tormach 1100MX Washdown Hose Manifold: Mounts to right side enclosure light bracket, tap with 1/2 and 1/4 NPT tap and use ½ NPT to ½" pneumatic push to fit adapter.
I split the model in half so that each side has a smooth surface and the USB flash drive can be inserted easily. But it is certainly possible to print as one part. For a better look I printed a contrasting border. This can also be…
Holder of the USB flash disk for 3D printer Prusa Mini. You need also cabel “New USB 3.0 Extension Cable Up Down Left Right Angle 90 Degee” from Aliexpres.com. Why this type of holder ? My “Mini” is storaged in box and I cann't see slot…
Brettspielfigur für das Crashderby Spiel.
This was my first completely original idea. I wanted a way to integrate my washer and dryer into my smart home setup without too much effort. I came across this blog post talking about using some cheap and sensitive vibration sensors and…
This is a Formula 1 car that snaps together and is a 400% scale version of the Crashderby Prusa Board game cars but as a F1 Derby car. I originally made this for the competition but didn't finish in time and liked the model so much I…
Just a modified cover for USB flashdrives holder so you can have cleaner desk. These parts are connected with M3 bolts and nuts. Infill: 25% layer: 0.2mm Perimeters: 2
Description and Design Goal: Regular flashdrives are boring. Originally, this was created with the intention of storing rhythgame songs. This shroud is designed to fit the 128gb/256gb Amazon Basics flashdrive (I have not tried this with…
This adapter replaces the stock spray diffuser used on the Nimbus washdown hoses and turns it into a regular male garden hose fitting. I connect it to a Salt-Away mixing unit in order to flush my outboard motor while on a mooring. A…
Simple tray that fits under the steering wheels in the game box, with a separate compartment for each type of token or coin. Except for that i have miscalculated and it's two compartments short... (I have decided to mix two and two…
This is a Formula 1 car that snaps together and is a 400% scale version of the Crashderby Prusa Board game cars but as a F1 Derby car. I originally made this for the competition but didn't finish in time and liked the model so much I…
There is a version that features a slot at the front for a USB flash drive or for your own adapters. An adapter has also been created for the Raspberry Pi USB flash drive adapter.
This shroud shares mount holes with an 80mm fan. Holes are undersized for 3mm screws and nuts. My enclosure uses a bottom fan, and this covers the top vent. If you need modifications, PM me and I can provide them or provide other file…
A compact desktop stand designed to hold one USB flash drive and two standard SD cards. I modelled this as a small, minimal desk accessory to keep my cards and adapter accessible instead of stuffed in a drawer or bag. Perfect for…
