Liczymy pasujące modele…
Zeros to about 50m but Elev. and Windage is adjustable. Requires: 1x M2x~10mm 1x M3x~23mm + nut 2x M5x~25mm Not all picattiny is manufactured within the same tolerances thus sanding may be necessary.
Another case to turn a DigiSpark Attiny85 into a (fake) USB stick (or just a nice enclosure, that's up to you ;-) ). This one features a consistent hole, which allows attaching it to a key ring or some kind of tie. There are also two 2 mm…
This is a simple box for the Digispark AtTiny 85 device. Simple and easy. I have used the Attiny85 to create a small device that would prevent my computer from going into sleep mode when connected and running macros on remote computers.…
Custom version of the Digispark attiny85 BadUsb fake usb memory case. https://www.thingiverse.com/thing:2347216/remixes Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.12mm Infill: 20…
no support pla+ high infill, increase number connects with 5 m5 screws put the m5 screw with the spacer from one side and m5 nut from the other
I took rtj's design and expanded it to 36 cm., please refer to the description of rtj, that is the real job.
a DigiSpark Attiny 85 board in Step format to use in your own designs
Print with supports everywhere. Slide onto Nerf Rival tacticool rail. Use your tacticool attachments.
DigiSpark ATTiny85 Case Eclosure with 3 top designs. 1 closed, 2 optional, 3, cut for access to connectors.
This is a picatinny remix if this guys handstop design, ur welcome :) Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: 3D Printing
Závitové vložky: 2x matice M4. Spojovací materiál: 1x šroub M4x8 se zápustnou hlavou (upnutí pružiny) a 1x šroub M4x10 s válcovou hlavou a vnitřním šestihranem (přitlačení pružiny). Při lisování matic do montáže použijte vteřinové…
I've created a new USB Volume Knob, that fits for a simple rotary encoder and a Digispark ATtiny85 with micro USB. If you have a rotary encoder with 20mm half handle, to avoid the volume knob is becoming very high, the semicircular mount…
This is a remix of my box for Digispark attiny85. The original doesn't work on some of my laptops. This one does. You can see the original to see how the microcontroller is placed in the box: https://www.thingiverse.com/thing:4725682 or…
I remixed STANAG 4694 rail by cmh to create this. Stanag rail should be compatible with picattiny accessories. My little contribution in making the world a weirder place. It is designed for fit .36 caliber Uberti colt 1851 I don't know if…
Just made a case for ATtiny85 to have it as a Bad USB Dongle, to hide the look of the dongle. I've used ABS filament here, you can use anything you want. Print time around 30-50 minutes. 35.50x23cm.
A USB 1 key keyboard with DigiSpark Attiny85 board and mechanical keyboard switch (soldered together). Can provide the code for the DigiSpark Attiny85 if anybody wants :)
This is a simple robot project using 3D-printed parts and an Attiny85. It is controlled using a TV remote but can also drive by itself using an ultrasonic sensor. More Information:…
no supports, pla, high infill, increase walls number for unbreacable foregreap for the soft greap: tpu low infill
USB Volume Knob based on WPATRICK's design. See photo for slicer orientation. Adds notches to interior of housing to account for alignment pin on rotary encoder Adds 3mm in length to knob to account for longer rotary encoder (as noted in…
Adapter for a Solderless Flash process with an DIP-8 IC (in my case a ATtiny85) with some Pogopins. Quick and dirty. Yes i know, there are Nullkraft Adapters for this special case, but i needed something right now :-D You need a plastic…
Arduino-Programmierstation-Atmega328-Attiny85 Arduino Programmierstation Atmega328 & Attiny85 Hier ist der Link zu den Platinen: https://www.pcbway.com/project/shareproject/Arduino_Programmierstation_Atmega328_Attiny85_442d283b.html Und…
Exposed PCB boards give me the willies, so I threw together a small case to shield my eyes from the exposed solder joints. Access to jumper terminals provided, as well as small insets to make chip removal a bit easier. Printed in PETG at…
MICRO is a micro sized handheld cr2032 battery case for Tinyjoypad It's for the trimpot version of tiny-invaders. The Arduino program, programming and building guides are in the zip files at Other Files section.. Since it's case for an…
Third go at automating my Senseo coffee maker: turn it on, wait for it to heat up, pour a cup of coffee and turn it off again. First try was simple but hard to set up and not very reliable when pushing the buttons:…
I reworked FacelessTech's bauble design using FreeCAD's Part Design workbench and sized the result to fit inside the “Make your own bauble" cases that you can find in craft stores. An ATTiny85 MCU was fitted inside the bauble and a small…
A basic piccatinny mount for gopros
Arduino Flugzeugbeleuchtung mit Attiny85 Hier ist der Link zu den Platinen: https://www.pcbway.com/project/shareproject/Arduino_Flugzeugbeleuchtung_mit_Attiny85_85801747.html Und hier noch zu der passenden Programmierstation:…
Small and configurable useless box controlled by ATtiny85 uC. Just one servo motor for movements and there are also lights! If you want there are gerber files for a custom PCB board. Project name: Small Useless Box Description Compact…
ATTINY85 Programmer Using Nano This is a programmer for an ATTINY85 using a Nano as an ISP. There are any number of Internet articles on how to build these. My contribution just provides one way to accomplish mounting and connecting…
An Arduino UNO shield for rapid Attiny85 programming. To view the full project or order the PCB, visit the project on PCBway: https://www.pcbway.com/project/shareproject/Attiny85_Programmer_Shield_for_Arduino_UNO_170b5847.html.
SMD strom: https://pihrt.com/elektronika/331-vanocni-strom-smd-s-attiny85 Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2mm Infill: 15% Filament: Prusa, DevilDesign... PETG green Category: DIY
I wanted to play with the new ATtiny424 which happens to have a built in 32768hz oscillator. So decided to build a binary kitchen timer. I have some mini Christmas tree's (made with attiny10) and thought a building would go good with it.…
A small gothic chest designed to house an AtTiny85 development board with a microUSB port and provide space for three WS2812Bs split and mounted horizontally. The chest then uplights an object through the aperture, in this case, the Fancy…
Obal pro SMD destičku "smile" s procesorem Attiny84: https://pihrt.com/elektronika/363-arduino-smile-s-attiny-84 Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15-0.2mm Infill: 15% Filament:…
It is a very mysterious and powerful device and its mystery is only exceeded by it's power! Original description: https://tol.acritum.com/2110/attiny814-frequency-meter Translation:…
Complete original description: http://tol.acritum.com/2073/soil-moisture-sensor-attiny13a Google translation:…
Made for this model: https://s.click.aliexpress.com/e/_c32e3QEj This 3D-printed custom enclosure provides a compact, protective and practical housing while keeping all the main functions easily accessible.
Project PCB and software .ino files here: https://github.com/mariusmym/ATtiny-Focus-Timer and here https://oshwlab.com/mariusmym/project_flrpzzkd There are two types of top case formats. One of them is a one piece design (you have to keep…
just a little mount that can be taped on a surface. Using two small 2mm brass inserts and 2mm screws. Pretty quick and eazy. Category: 3D Printing
I changed the attachment point to be standard 10mm spaced picatinny. I did this because I broke my sled on my Nexus Pro X and when I designed a model to replace it, i used picatinny rather than the spacing and style Adventure Force used.…
ATtiny85 Bathroom Night Light All instructions here: https://github.com/Lafeeleonie/motion_activated_night_light_attiny85 A small motion-activated bathroom night light designed for my children. The idea is simple: the light should only…
Since I will be on the road for the next few days, I need a bit of protective case for my Microchip Curiosity ATtiny3217 board. It is a very tight fit so that no screws are necessary. However, I used them anyway.
I took rtj's design and expanded it to 36 cm., please refer to the description of rtj, that is the real job.
It is a very mysterious and powerful device and its mystery is only exceeded by it's power! Original description: https://tol.acritum.com/2110/attiny814-frequency-meter Translation:…
I changed the attachment point to be standard 10mm spaced picatinny. I did this because I broke my sled on my Nexus Pro X and when I designed a model to replace it, i used picatinny rather than the spacing and style Adventure Force used.…
