Liczymy pasujące modele…
Timeless model of a nutcracker which is highly optimized to crack walnuts and hazelnuts. Especially hazelnuts are hard to crack - the special geometry places the nut slighty off-center below the piston which makes a perfect crack. Print…
Wydruk około 4,77 €–5,83 € nettoWstępna wycena jednego wariantu
This part replaces the top part of a mudguard holder on some models of Gazelle (children) bikes. I hope this helps for someone. This is only the upper part. The part most likely to break. Included is the Fusion360 archive to help you get…
Wydruk około 0,31 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The shopping basket that comes with the stroller only fits on the top connecters, so you have to put your child on the bottom connectors when using the basket. These adapters allow you to use the connect the basket to the bottom mounds.
Hey there, my name is Jess, and I remixed this design by Hazel Domain, making it into a crown that blends into my hair and fits underneath my bangs. This design was printed using PETG Translucent filament. Very happy with the final product!
Posted the fixed models here, so as not to produce copies on the sites. Link to rotator. Link for more info.
A decorative door weight inspired from Zelda Tears of the Kingdom to keep your door open (Just realised the
Simple to print nutcracker for small nuts. Works well with PLA. I use Numakers PLA+ Print as hot as possible with as little little cooling as possible for maximum strength.
PAY the WHOLE box for 2 PARTS ....
Nutcracker for hard hazelnuts and other nuts. Better than a squirrel! It is useful for cracking hazelnuts, walnuts, almonds, and other hard-shelled nuts. ** Updated version 1.4 - Redesigned body and new reinforced design Use PLA or PETG…
An adapter to install car seats onto a Cybex Gazelle stroller. Best results if printed upright. PLA is strong enough but the bottom latch might be too brittle.
Kings The Secret Service - Gazelle (Sofia Boutella) - 2014 3D printable model.
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A detailed 3D model inspired by Azazel from The Binding…
Uniform spikes designed for Katsucon 2019. Print Settings Printer: HyperCube Evolution Rafts: No Supports: Yes Resolution: .2 Category: Costume
This adapter lets you mount the Cybex Shopper in the lower basket position without losing any stroller functionality or sacrificing storage space. Key Features: Remove the shopper freely without taking off the adapters, carrycot, or…
I made this bazel for resin pendants, it is 1x1,5 or 2,5x4cms. with a little hole at the top.
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP --- The CF Gazelle is captured in an elegant, alert…
This model interfaces t0nito's '1.7 Ghz HRPT Helicone Antenna' with jbyrns' 'AZEL_Satellite Antenna Rotator - Tracker' , allowing both to fit together making it a great addition for tracking L-Band satellites. More information on my…
The name says it all. I lost the clip for the mudguard and needed a new one. Fits a standard Gazelle bike.
The Aérospatiale Gazelle is a lightweight, five-seat helicopter developed in the 1960s by the French company Aérospatiale in collaboration with Britain's Westland Helicopters. Known for its sleek design and exceptional agility, the…
Gazelle bikes feature an easy to lose clip that holds the dress guard in place. The original replacement part costs around five euros. Without the dress guard clip, the dress guard will happily play music on the spokes of your back wheel…
The gazelle keychain was made to order in color, since there are no analogues, well, there is one, but for 400 rubles, like Robin Hood, I did everything myself and put it in the public domain for those who really need it.
Capture the delicate beauty of nature's forms with this 3D printable STL model of a Gazelle Skull. This elegant natural specimen is perfect for adding a touch of organic detail and subtle sophistication to your displays, dioramas, or…
Car speaker spacer podium 5 inch for GAZ Gazelle 2705 Applicability: GAZ Gazelle 2705
While trying to figure out a way to give a gift to one of my Financial Peace University classes, I had the idea to have a gazelle with some of Dave's sayings on it. After seeing a low poly gazelle at Thingiverse…
The holder was created for the SIGMA Blaze rear light to be fixed to the Gazelle bike rear fender. I got the SIGMA Blaze light as a birthday gift and it has an integrated braking light. Usually the Blaze is made for the installation on…
Snaps securely to a 10mm tent pole
Nutcracker for hazelnuts. There is two versions of screw. Red one is fully printed, works well, cracks 9/10 of hazelnuts. Blue one is better, cracks 10/10 hazelnuts, but you need 1x M5x70 screw, 1x M5 nut and some pads under screw head.…
Needs 3 M4 12 Screws - and Nuts.
Snap fit simetrical model, you can use it to make a strong bond between objects
Bonnet support holder GAZ Gazelle 2705 3302 Original: 4301-8418126 Applicability: GAZ Gazelle 2705 3302
This foot bar makes it possible to easily lift the front wheels of the stroller in order to overcome curbs or other obstacles. The printed adapters are suitable for any pipe ф16x1 mm. The pipe must be 403 mm long. Use a small hammer to…
Multi piece assembly - print in different colours and fit & glue together. Supports - yes for some of the pieces.
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP I’ll be gradually adding colored profiles for the Mini Zoo…
Haselnuss - hazelnut - fındık
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Plain bearing roller side door GAZ Gazelle 2705 Medium side door roller Gazelle, Sobol (Sliding door support medium). Applicability: GAZ Gazelle 2705 Article of the original part: 2705-6426194-30 Part number for installation:…
These models are compatible with jbyrns' 'AZEL_Satellite Antenna Rotator - Tracker' . The retention bracket holds the Azimuth servo in place more securely, attaching to the original screw holes of jbyrns' design. The driver attachment…
Gazelle Berini m48 front fork spring bolt Check also my other designs: https://www.printables.com/social/201278-hans/models
I have designed this model to perfectly fit the existing holes in my Gazelle “Marathon” bike frame. The original clips to hold the gear cable were broken off. Instead of designing them after the original part (hole in the middle to push a…
PCB and display out of the Gazelle XTRA/EX HMI bicycle computer, used to create a custom fixed housing.
Fixed housing for the Gazelle XTRA/EX HMI bicycle computer, so you don't have to take it off anymore. Bikes get stolen anyway 😬
by order, the glove compartment handle was printed for documents in Gazelle business, I share for free a model that I made myself.
Meet Hazel, a cheerful hedgehog with a rounded face and chunky sculpted spines. Part of Cuddle Crew, Flavora Studio’s collection of plush-inspired animal figurines for your desk or shelf. Includes matching-scale STL and 3MF geometry…
Spazelka Do Drukarki 3D jest do szciągania projektów.
My old panniers had simple aluminum hooks for hanging it on the rack. They didn't work very well with my new Gazelle C8 e-bike that came with MIK rack. These adapters allow me to hang my pannier on the new bike without having to wory…
A set of 3 3x1x3 Gridfinity containers for various nasal sprays: Afrin ( .5oz/15mL ) Azelastine ( 1oz/30mL ) Walgreens generic brand Nasacort ( .57oz/16.9mL ) Print with your material of choice, no supports needed, don't use a brim unless…
I really liked the design of the original model however with the Lightning F7 size the way it is and typical floppy drive size there wasn't enough room for both the PCB and the drive. This model is 10 mm longer than the original and fits…
This is a bike stand foot for an unusual Gazelle kickstand with a profile as shown in the photo. The overall diameter of the metal stand is around 20mm. Print using TPU or ABS with the base that touches the ground horizontal.
print in ABS with 100% infill. This is the part that connects the headlight to the frame with pivotpoint. Replacement for original part
This small fixture snaps onto the rear rack of Gazelle ebike (on one of the thin cross-bars) and keeps your u-lock in place so it doesn't fall of. You still need the rubber expander to hold it, but in my case just the expanders were not…
A simple model of an Azelastine ( 1oz/30mL ) bottle that can be used with other projects. I used this model to create the cutout for my Gridfinity nasal sprays (Afrin, Azelastine, Walgreens generic Nasacort) model.
When replacing the factory radio with an Atoto S8 Ultra 10.1 QLED unit in a VW Eurovan or Winnebago Rialta, you will have a single-DIN slot that requires this bezel to achieve an OEM look for your dash. Because the ATOTO is one‑DIN but…
Good day. Thank you for taking the time to view my model. I have created a 100% custom cyberdeck from scratch. It consists entirely of “off the shelf” components with no soldering or previous electronics experience required. You do not…
A hazel leaf coaster with a circular recessed surface and a raised, serrated rim inspired by natural foliage. Its recessed center catches condensation and small spills, while the flat base provides stable support for mugs and teacups.
Capture the delicate beauty of nature's forms with this 3D printable STL model of a Gazelle Skull. This elegant natural specimen is perfect for adding a touch of organic detail and subtle sophistication to your displays, dioramas, or…
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
This model interfaces t0nito's '1.7 Ghz HRPT Helicone Antenna' with jbyrns' 'AZEL_Satellite Antenna Rotator - Tracker' , allowing both to fit together making it a great addition for tracking L-Band satellites. More information on my…
This is a cartoon-style netball trophy design featuring an anthropomorphic gazelle as the central figure. Key elements: Character (Gazelle): Stylised, friendly cartoon gazelle with large expressive eyes and curved horns. Upright,…
An adapter to install car seats onto a Cybex Gazelle stroller. Best results if printed upright. PLA is strong enough but the bottom latch might be too brittle.
print in ABS with 100% infill. This is the part that connects the headlight to the frame with pivotpoint. Replacement for original part
This is a digital 3D printable model of Hazel’s Distaff from the South of Midnight. Perfect for cosplay, themed photoshoots, or displaying a magical artifact from the beautiful video game! 🌿 📦 Included Files - Distaff and 2 versions of…
This is a cartoon-style netball trophy design featuring an anthropomorphic gazelle as the central figure. Key elements: Character (Gazelle): Stylised, friendly cartoon gazelle with large expressive eyes and curved horns. Upright,…
The design of these horns is reminiscent of twisted vines or wood with thorns poking through, they are my favorite that I have modeled. These lightweight horns could be the perfect addition to your project, be it for your druid, tiefling,…
