Wyniki wyszukiwania: benchmade

Benchmade 62 balisong butterfly knife M3 fasteners

Benchmade Bugout 535 Scales

I will add some custom design of it later ;) enjoy!

Benchmade Bugout 535 Knife Scales

I have seen a similar version on etsy. The rear holes for the belt clip is designed for M2 brass inserts. I added a blank version as .STP to make remixing easier. Printed in Prusament PC Blend to make it as sturdy as possible.

BenchMade BM63 Balisong - Circuit Tanto

I took a look at admin's "Benchmade 62 balisong butterfly knife M3 fasteners" and I was inspired to make it just a little bit cleaner. So I hid the m3 nuts in the blade and the handle. and added a cool circuit board look and a tanto blade…

Benchmade 72 Balicomb Butterfly Comb

Print all five files at the same time next to each other and then assemble them using 12mm M3 socked-head bolts and M3 nuts. I recommend sanding the contact surfaces with water and a high grit and then lubricate them for better…

Benchmade Bugout 535 Knife Scales - STEP

https://www.benchmade.com/products/535

BenchMade Inspired Dagger

I've Included the whole Knife as an .stl file. I've purposely shortened the blade to about 4in inches down from the original about 7in… To create a more reliable plasic knife… I feel like too long and it will be flimsy and bendy. So keep…

Benchmade Bugout Knife Stand

A fitted stand for a Benchmade Bugout pocket knife. Store/Display your knife in style!

Benchmade Adamas Scales

10-24-2019 UPDATE: Finally finished the knife scales and got the dimensions pretty much perfect This is a scale for the Benchmade Adamas pocket knife, the scales are the same on both sides so just mirror this file to print the other side…

Benchmade Axis Lock Removal/Assembly Tool

This tool will hold the blade and washers to the liners, when replacing scales on your Benchmade axis lock knife. Tested on the mini Griptilian and mini Osborne. Recommended Print Settings: 0.15mm or less 50% infill or greater Support On…

Pinch-proof Benchmade 62 balisong butterfly knife M3 fasteners

In the original model, if I squeezed the handle too hard I could pinch the blade which prevented it from moving. I added a back to prevent that. Make sure your flow is spot on or you'll have to sand the handles to get the blade to not…

Benchmade SOCP Dagger Replica

Originally made at my father's request, because he wanted to see how the knife felt in hand before he purchased it. Can be made soft and flexible out of TPU, or made solid from traditional filament for spinning and fidgeting. If used for…

Gridfinity 1x3 Benchmade Bugout

Drop your Benchmade Bugout into a gridifnity slot.

Benchmade Knife Stand

Remix of another stand, to include the Benchmade logo.

Gridfinity 1x3 Benchmade 940 Knife

It's a snug fit so I made it so that you just need to press down on the top for the bottom to pop up enough to grab it.

Benchmade Mini Bugout 533 Scales

Scales or grips for Benchmade mini Bugout 533 Made these for a coworker based off the originals he gave me. May need some adjustment *You need 2 of these, just print a second one mirrored. Printed with .25 nozzle to help with detail

Printable Scale for Benchmade Immunity

A printable scale for the Benchmade Immunity. It could probably use a bit of tweaking, so I included the Fusion 360 and step files if you would like to take a shot at customizing it for your needs. When printing, just make a mirrored copy…

Benchmade 940 Knife Scales

May need to scale it to size a bit based off fit and nozzle sizing. I printed this with 0.6mm nozzle with 0.15mm detail.

Benchmade Mini Griptilian Knife Stand

A fitted stand for a Benchmade Mini Griptilian pocket knife. Store/Display your knife in style!

BenchMade Snody Resistor Inspired knife

Summary Basically says it all. I really liked the profile of this knife ever since I originally saw it. Recently remembered it existed (once). So I drew it up for nostalgia's sake. I hope it brings you joy as well. The Knife in question:…

Benchmade Bugout Vertical Stand for Gridfinity

This is my first remix.

Benchmade Bugout Gridfinity bin

A standard Gridfinity bin for ur dear Benchmade Bugout

Benchmade 62 Balisong Blade with Embedded M3 Nuts

Cleaner look while maintaining the added weight.

Benchmade bugout knife holder/sheath for Multiboard

This is a simple holder/sheath for multiboard designed for the benchmade bugout. Requires tree supports on the pegs.

Ankle Holster for Benchmade Bugout Knife

Uses 25 mm width straps, turns into a fixed blade basically.

Benchmade Lightbox

I printed at 75% scale but you can scale as you wish. Best is to keep the z axis unscaled if you do so.

Benchmade Bugout Vertical Stand for Gridfinity

This is my first remix.

Benchmade Knife Gridfinity Magnetic Stand

Easy no-fuss prints, no supports required. I've added a press-fit and glue option for the magnets. Please comment if you have any issues and need help. These models are somewhat new and I'm using the press fit versions myself. See notes…

Benchmade Foam Reuse Box

Just a box to reuse the foam in benchmade boxes. Requires 6X M3 35mm screws and nuts, red loctite recommend.

Benchmade Mini Adamas pivot collars

Replacement pivot collars for the Benchmade Mini Adamas (may work for other models with similar pivot collars). Printed using Bambu Lab Bronze PLA. Print in 0.1 layer height. Depending on your printer/settings, you might need to slightly…

Benchmade Mini Barrage Shadow Box

UPDATE 2/14/25: I added a drill guide for installing the mounting screws. Worked perfectly for me but your mmv. I also was able to assemble everything and fit perfectly! Ive posted final photos so you can see how it turned out. Only thing…

Gridfinity Holder for Benchmade 834 Knife

Gridfinity-compatible holder designed for the Benchmade 834 knife. It securely holds the knife while allowing easy and comfortable access. The top surface remains fully Gridfinity-compatible, so other modules can be stacked on top. The…

Benchmade Bugout Vertical Gridfinity

I wanted something to be space efficient and hold growing collection of bugouts. This is a single unit. If folks find it helpful I'll add a unit for 4 of them. They don't stand perfectly straight up but it seems to hold mine both fine,…

Benchmade 580 safety

lost the safety switch when cleaning my barrage and couldnt get a replacement from benchmade so i made one in fusion

Benchmade Bugout Vertical Stand for Gridfinity

This is my first remix.

Gridfinity Holder for Benchmade 834 Knife

Gridfinity-compatible holder designed for the Benchmade 834 knife. It securely holds the knife while allowing easy and comfortable access. The top surface remains fully Gridfinity-compatible, so other modules can be stacked on top. The…

Benchmade Osborne 940 replacement scales Bundle [x2]

Includes both scale variants, each variant includes a left/right with & without pocket clip screw holes. “Original” style scale - very close to the original “Flat” style scale - easier to print. These files are made specifically to fit…