Liczymy pasujące modele…
Yo la commu' Voici le modèle de clips de garniture reproduit sur mesure de l'original, mais rayonné aux endroits sensibles. Pour Peugeot partner et clones 😎👌 Pour l'impression : Couches adaptatives préférable. Impression fine conseillée.…
i wanted to use a “professional” smartphone Holder, bute the placing in our Peugeot Partner wasnt good So this is an adapter for the use of Smartphone holders that are normally fitted to those venting grills It should fit to Citroen…
Printed it on a Geeetech I3 with 0.6mm nozzle to cut the printing time. The original model used a hard plastic (PLA/PETG). Tried it with Esun Grey TPU and it turned out acceptable. Used supports but they were tough to remove. Printed the…
Replacement Knob for the shift of Peugeot Ranch/partner and Citroen Berlingo cars, fit quite snug, I used PLA, but consider heat resistant plastic in case the car gets very hot on the sun... I managed to fit in the original knob swatch…
I use for printing my Ender 3 S1 Pro with Klipper and high flow kit. Add mor grip for the phone holder! Print Settings Printer Brand: Creality Printer: Ender 3 S1 Pro Klipper & high flow kit Rafts: No Supports: No Resolution: 0.2 Infill:…
Printed on Ender3 v3 KE with normal auto tree support and 100% fill. Tested with some cheap PLA. White clip on image is original part from Citroen. If you want to be sure that the clip holds good, use the strong one.
Das Auto piept, weil etwas auf dem Beifahrersitz oder der Rückbank liegt? Abhilfe schafft der Gurtschnapper Blindeinsatz. Passend für Citroën Berlingo oder Peugeot Partner. Drucken, einstecken, Ruhe :-)
I made this part to replace the buttons of my key car. I use it for years now and its OK Open the key, remove the electronic card, put each part inside holes,put it all back together. Just one thing, it's not waterproof. Print in 0.1 mm…
Citroen Berlingo II (b9) Peugeot Partner Mobile Holder Category: Automotive
Latches for the rear storage box on the Citroen Berlingo Multispace or Peugeot Partner B9 modutop. Replacement latches are not available to purchase as separate parts. The roof box is part 8335KE which is a very expensive part to buy new.…
Car Bonnet Lock Catch Repair Handle For Citroen Berlingo Peugeot Partner 2008-on 7934e7 Automobiles Handle Opener
Our car came with three of the six plugs missing, and one went missing over time. So I quickly designed these screw plugs (M8 thread) to cover the holes. The plugs can be screwed in and out with a coin. Do not tighten too much to not…
Footrest for Toyota ProAce City Verso (2020) with automatic gearbox to protect original carpet from wear out. Double sided sticky tape is used to attach it to the carpet. Printer: Prusa MK4 Nozzle diam.: 0.4mm Layer: 0.2mm Filament: PETG…
J'ai modéliser ce pommeau de vitesse en essayant de me rapprocher de sa forme d'origine pour mon Berlingo de 2003 phase 2 il peut se monté aussi sur les Peugeot Partner conçu en 3 pièces le corp imprimer en ASA pour résister au chaleur et…
Designed specifically for the PSA Berlingo (K9) model's aftermarket center console. Manufactured using ABS to withstand varying weather and heat conditions. Features a movable cupholder and an integrated USB cable holder.
Citroen berlingo trunk hook. No supports required
Citroen Berlingo / Peugeot Partner (B9) factory fitted roller blind hooking frame. To install simply push it over the metal part until you hear a click. I printed it in ASA with 4 perimeters, 20% infill and brim. No supports needed if the…
Español al final! This is a little modification for the center console of the Citroën Berlingo or Peugeot Partner (model M49, 1996) that is still being produced and sold here in Argentina and other countries. On older versions, the car…
Version française en dessous ============================= This door lock cover has been specially designed for the Citroën Berlingo First, offering a practical and aesthetic solution for replacing broken plastic caps. Its adaptable…
Blanks the awkward hole in the dash board gives you a flat surface to mount things too. I printed this and a ball joint (for mount rear view cam) in ASA, ABS glued them together and smoothed with acatone. Print face down, friction fit so…
Tištěno z materialu PETG, 4-5 perimetrů, 40-60% infill. Dle potřeby je možno rozdělit na dva díly a tisknout zvlášť. Jde velice dobře slepit kvalitním vteřinovým lepidlem. Pro lepší teplotní stabilitu zvolte material ASA či ABS.
Another marker: 9810964177 I was told it fits.
I have a citroen berlingo from 2018. This car doesn't really have a decent cupholder so I've printed one. It fit's perfectly for a can of 330ml. TIP: Print it in PETG or other plastic that is more heat resistant. I've printed this with…
This model has thread It has no hole on front There is a chamfer instead of fillet at the corner
Simple cup holder that fits mentioned cars from around 2019+. Hole in the model is 83mm at the top and tapered a little to the bottom, designed to fit a Waterdrop 350ml thermo cup. It snaps pretty firmly into the center console, but it's…
Dashcam holder for Citroen Berlingo III family (2019+ - also Toyota Proace City, Peugeot Partner, Opel Combo) behind the infotaiment panel. Top part has slot for Navitel R600 dashcam but you can change it for whatever camera you're using.…
Luggage cover net holder for Peugeot Rifter, Citroën Berlingo, Opel Combo Life 2018-2024 left original bent right my fusion3d creation ssecond version printed in CPE 100 % infill and it lives without deformations without snaping in our…
Citroen Berlingo push in cup holder to suit 300ml and 500ml cans etc, also fits partner van
Réparation de la boule du pommeau de levier de vitesse de ma Citroën Berlingo 2. Je ne voulais pas changer la partie basse qui est encore en état. J'ai préféré retirer tout le caoutchouc de la boule, ainsi que le poids en métal, afin de…
hier habe ich mal die Führung für die kupplungsfeder entworfen da sie an unserem wagen gebrochen war. gedruckt 04 düse bei 0,2mm in PETG hält bisher sehr gut Führung vor ein bau ordentlich fetten.
tunel insert into middle console for PSA and Toyota cars 2019+
j'ai créer ce pommeau de vitesse car celui d'origine de mon Citroën Berlingo du a son Age commencé a partir en miette j'ai repris les côtes avec mon pied a coulisse et j'ai tous reproduit a l'identique afin de le fixer sil suffit de…
Material PETG / ASA
These fixings sometimes become loose and the square nut, which holds the window in place, can become lost. Here is an alternative in Nylon for the M4 square nut and in TPU for the washer. Nozzle 0.4 mm, layer 0.15 mm
Fits second-generation Berlingo, often referred to as the Berlingo II (B9 platform) and sold from 2008 to 2018 No Supports needed. I used epoxy to glue it on.
A cargo hook which can be mounted on the bulkhead behind the driver cabin on Peugeot Partner and Citroën Berlingo second generation (2008-2018) cars. The hook is fixed to the bulkhead with M4 bolts.
2 bacs (part 1 et part2) pour rangement entre les 2 sièges avant d'un Citroen Berlingo II (2010). Les bacs sont amovibles et s'emboitent dans les cases d'origine : Les bacs sont à imprimer en PETG ou autre matière résistante à la chaleur…
Berlingo 2 windscreen washer cap, you will just need a cerflex/rislan collar.
Vent is separated to four parts and they are joined together with M3 screws. As insect protection you can buy cheap insect protection screen, cut it and glue from inner side. For assembly you will need 12 pcs of countersunk M3x10 and 12…
Kein Handy Halter passt für die Air Vents im Berlingo? Also habe ich hier 2 Versionen erstellt. Eine breitere und eine Schmale. Sitzen bombem Fest, da wackelt nix. Ob sie auch bei baugleichen Modellen wie dem Peugeot Partner o.Ä. passen…
Impression en PETG de préférence avec 100% infill.
Use rubber patch to secure the model firmly.
Replacement part for the damaged part of Modultop Berlingo 2016.
imprimé en PLA avec support arborescent.
I made this part to replace the buttons of my key car. I use it for years now and its OK Open the key, remove the electronic card, put each part inside holes,put it all back together. Just one thing, it's not waterproof. Print in 0.1 mm…
Citroen Berlingo push in cup holder to suit 300ml and 500ml cans etc, also fits partner van
These fixings sometimes become loose and the square nut, which holds the window in place, can become lost. Here is an alternative in Nylon for the M4 square nut and in TPU for the washer. Nozzle 0.4 mm, layer 0.15 mm
This model has thread It has no hole on front There is a chamfer instead of fillet at the corner
I recreated the original model for parametric. I try my best, but it is my first try. So if it has problem please tell me, or if you make it better share with the community.
J'ai créer ce support de téléphone ne trouvant pas mon bonheur sur le net ou autre j'ai intégrer aussi un aimant qui grâce a lui permettra de fixer mon téléphone avec sa coque en métal ce support se clips sur la grille d'aération de mon…
Berlingo III headlight cap; probably it also fit Pegout Partner III, Opel Combo E, Toyota ProAce City, FIat Doblo III Used TPU Fiberology Fiberflex 30D
I have a 2021 Citroen Berlingo Van MK3, I wanted to upgrade the front door speakers, but needed an adapter to get them to fit, I couldn't find a reasonable priced adapter, so i designed my own, fits perfectly, 3MF and GCODE file included
A cup holder for the central storage box on the Citroen Berlingo Multispace Specifically designed to hold a protien shaker bottle, something the current cup holder struggled to do. It has holes on the underside so that something else…
Ein Abstandshalter für das Heckfenster vom Citroen Berlingo. Zur Belüftung beim Campen oder für Haustiere. ACHTUNG, KEIN DIEBSTAHL SCHUTZ Deepl.com A spacer for the rear window of the Citroen Berlingo. For ventilation when camping or for…
