46 modeli
Introducing the 3D Printable Flexi Common Side-Blotched Lizard. This intricately designed model captures the essence of the fascinating side-blotched lizard, known for its distinctive patterns and agile movements. Key Features: Realistic…
A traditional style rocker blotter, used for blotting ink off the page to dry it when writing with a fountain pen. Slip the end of a piece of blotting paper into the slot on one side of the base, wrap it around the bottom of the base,…
Replacent for Jablotron RFID leather tag. Print instructions Rafts: No Supports: No Resolution: 0.2mm Infill: 40%
Holder / rack for SDS-PAGE and Western Blott glass. Works great for both thicker and thinner glass
In most molecular biology labs the western blot membranes are incubated in flat trays, flat plastic bags or tubings. This results mostly in poor distribution of the antibody or staining solution and therefore uneven spreading of the…
I designed this box after the boxes we use for Western Blots at the lab. I am currently in the process of testing how the PLA fares against the different buffers and chemicals. This box can also be used to store things. Print Settings…
these RCs are old and brittle and I am out of spares. So I had to design it from scratch. Nothing artistically special, just little chamfers to make it easier for printer. I just need it to be functional. Feel free to make it more…
Compartment box with 11 divisions for regular size western blot nitrocellulose or PVDF membranes (8.3 cm x 13 cm) and compatible with 12 well SDS PAGE. This box was designed to facilitate incubation with different antibody samples against…
An Ink Blotter made to fit Herbin blotter paper. The paper is press fit into place with an insert. There are cutouts to assist in removing the press fit insert with a screwdriver to replace the paper when it is saturated, if its too tight.
UPD 01/10/2025 Was off by one file, republished. UPD 29/03/2023 Threads now 45 degrees, must print much better (haven't tested yet), basic stand added. --- The rocker blotter, which you need, if you prefer nib pen over all that…
I was asked to make a scan of the 'Blote Jan' national freedom memorial statue in Wageningen. I added some smoothing and detail to the hands that I was missing from the scans in Meshmixer. I imported the scans into the AliceVision tool…
This is an ink blotter in order to dry the paper. Ideal for fountain pen users. Maybe the shaft it's too long, but works well. I've used kitchen paper because I don't have blotting paper, but you can use coffee filters as well.
Box for Jablotron relay board JB-110N and JA150N
one nut spins on right and one spins on the left. I recommend printing with no supports.
Termostat má zkosené hrany, takže v případě, že není pevně namontován na zdi, tak je mírně sklopený dopředu a stabilita není stoprocentní. Pro přišroubování jsem chtěl použít dva krátké zapuštěné M3, ale závity vyšly nějak divně a tak…
Printed a pen style holder and a collar to hold the material in place. Worked really well.
Ink blotters are something that used to be on everyone's desk, but since the rise of the ballpoint pen, they've become more and more scarce. However, if you write with fountain pens today, you might have noticed that some ink and paper…
model je určen pouze pro systemy Jablotron jako díl pro montaž na dveřní prostory oken nebo dveří. vytvořeno programem: https://www.tinkercad.com T3D 2021
Printinted with PETG, 15 % infill, no supports. Attach Oxxe unit with double side tape. The second one is with the thread for M4 screw. Max deep is 15 mm.
Jablotron RC-82 case, print with flex filament
Le couvercle avec un diable en relief. Diamètre 50mm
Light rain cover for the Jablotron shock sensor, if you mount them on insides of doors and forgot to close them during a rain event, it might protect it. Might fit other Jablotron models.
Ink blotters are something that used to be on everyone's desk, but since the rise of the ballpoint pen, they've become more and more scarce. However, if you write with fountain pens today, you might have noticed that some ink and paper…
A small stand to hold an ink blotter rocker and space for a pen. Printed with the back of the model on the baseplate, tree supports and 15% infill.
Simple desk stand to prevent staining your desk when using the Rocker Blotter. (for this Blotter: https://www.printables.com/model/133501-rocker-blotter)
u can test the size of your bolts Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Polymaker Polyflex TPU Black Category: Tools
EN: Bumper for RF magnetic sensor JA-83M CZ: Podložka či skladovací díl pro JA-83M Good for storage JA-83M whether it is active (with battery) and you need pressed tamper switch. You tight JA-83M to a bumper with M3 screws or with zip…
Vyrobil jsem krabičku / kryt na teploměr JA-151TH od české firmy Jablotron, aby se mohl dát ven a nepršelo na něj. Pouze se tam vloží. Nejsou potřeba podpěry. Je to na ven, tak doporučuji PETG, ABS nebo ASA. Rychlý tisk, dole jsou otvory…
Ink blotters are something that used to be on everyone's desk, but since the rise of the ballpoint pen, they've become more and more scarce. However, if you write with fountain pens today, you might have noticed that some ink and paper…
The FMS 800mm Beaver wing is secured by a plastic quick-release wing key located at the rear of the wing. Since this small part can be easily misplaced during transport or field assembly, I designed a replacement that can be printed at…
Český popis: Držák na Jablotron JA-151 je praktický držák se stříškou, který umožňuje bezpečné přišroubování k podkladu. Slouží zároveň jako podložka díky zadní straně o tloušťce cca 1 cm. Na zadní a levé straně držáku se nachází drážka…
CROCHET FERMETURE DE HUBLOT pour sèche linge BRANDT bdm9cw
Poignee lave linge hublot interieur
Wall holder for Jablotron Thermostat TP-83
stropni drzak na kombinovany detektor pohybu a rozbiti skla jablotron JA-120PB duty pro skryte vedeni privodniho kabelu a skryti vsech nevzhledny casti cidla ktere z nejakeho duvodu nemuze byt umistene standartne v rohu sten ale musi byt…
This is a newly interpreted version of the two models: ‘Ultimate Western Blot Incubation Trays’ by Ultimo3d and ‘Western blot, antibody incubation, and protein detection box; medicine box’ by Siiqi. This version also features raised dots…
Replacement safety ring for JABLOTRON JB-150N-HEAD Náhrada pojistného kroužku pro JABLOTRON JB-150N-HEAD
Poignee Lave linge Hublot exterieur
Bonjour, Afin d'agrémenter la décoration de mon bureau, j'ai décider de créer un hublot pour habiller un écran tactile rond. L'écran tactile est connecté sur un Raspberry PI 5. Pour l'instant, celui-ci me sert de cadre photo. Par la…
Termostat má zkosené hrany, takže v případě, že není pevně namontován na zdi, tak je mírně sklopený dopředu a stabilita není stoprocentní. Pro přišroubování jsem chtěl použít dva krátké zapuštěné M3, ale závity vyšly nějak divně a tak…
stropni drzak na kombinovany detektor pohybu a rozbiti skla jablotron JA-120PB duty pro skryte vedeni privodniho kabelu a skryti vsech nevzhledny casti cidla ktere z nejakeho duvodu nemuze byt umistene standartne v rohu sten ale musi byt…
