Liczymy pasujące modele…
Abus Bordo Lock holder for Abus folding lock to mount to bicycle frame via standard water bottle cage mounts. I've printed this since I use the one lock for two separate bikes. It is a snug fit - I'm on V4 and happy with this level of…
Since the movable part of the mount coming with the Abus Bordo 6000K/120 SH tended to fall off rather often, I decided to construct a 3d-printable replacement, while I still was able to take measures on the original. I found printing it…
Boba Fett Bordon Connector. Dimensions 9.2mm diameter x 7.9mm long
I designed this holder for my Abus Bordo 6000K after the original mount failed on rough trails, especially when mounted on the top tube. Since using this one, I haven’t had a single issue with the lock coming loose. The mount fits the…
Windproof buttons for standard mosquito nets to be mounted on the side parts of the net.
A holder for the ABUS Bordo 6000/90 to mount it longitudinal in the back of my fully. Printed with TPU.
Remix di una moneta dei pirati per la recita della scuola, "L'isola del tesoro" sarà un successone.
This mount holds an ABUS Bord uGrip 5700 folding lock on the top of a Thule pack 'n pedal rack. Print instructions Category: Sport & Outdoors Summary This mount holds an ABUS Bord uGrip 5700 folding lock on the top of a Thule pack 'n…
Mit dieser Lösung möchte ich speziell für den epf-pulse ein Adapter anbieten der dafür sorgt dass man die Schlosshalterung ohne Probleme an den zu großen Rahmen der nicht rund ist anzuschließen Mit der Lösung wird aus aus der runden…
Made this very simple lock holder for my ABUS 6300/90 Bordo. I upladed the step file as well so you can adjust it to your needs. i attached it with VHB tape but i added screw holes if you need those. Feel free to comment.
I broke the clasp off my bike lock mount, this is what I replaced it with, https://www.rei.com/product/232792/abus-bord
To prevent my bike lock holder from self-opening when driving on rough terrain, I designed this clip that keeps it securely closed. It snaps on easily with a nice click and holds on securely, while still being easy to remove. Lock: ABUS…
Lighting upgrade for ABUS Bordo 6000C Unfortunately, I only noticed after purchasing the lock that the ABUS Bordo was also available with LED lighting, which is very useful when unlocking the lock in the dark 😉 But what's the point of…
Der Adapter sorgt dafür, dass die Schlosshalterung nicht nach unten wandert. Für die Verschraubung benötigt man zwei M5
A holder for the Abus Bordo X Plus (6500) to put it in your bottle cage/holder of your bike. I printed it for my dad, because the lock is kinda heavy. Does make a bit of noise, but it still gets used sometimes when my dad goes out cycling.
The ABUS Bordo Lite comes standard without any dust cover for the keyhole, leaving it exposed to weather and dirt, especially when attaching it to a bike without mud guards like a Gravelbike. This very simple dust cover is simply inserted…
Solid mount for an Abus Borgo 6500 Lite. You can install it on the top tube of the brompton with 2 ziptires. You also need a strap (≤ 30mm) to secure the lock.
Bicycle lock holder for the ABUS Bordo Lite, with hole spacing 63-67mm. Printed from ASA, set the layer time down, in the filament profile, so that no fan is activated on the sides and the layer adhesion is weakened.
A holder for the Abus Bordo X Plus (6500) to put it in your bottle cage/holder of your bike. I printed it for my dad, because the lock is kinda heavy. Does make a bit of noise, but it still gets used sometimes when my dad goes out cycling.
This is a custom-designed mount for the ABUS Bordo Lite lock. It features a dedicated compartment to store the lock’s key, so you always have it with you when transporting the lock. The mount is designed to be screwed onto your bike’s…
Printed with PETG, 0.2 mm layer height, 6 perimeters, 50 % cubic infill. Print was oriented as shown in picture to yield best strength. Organic supports were placed to support large overhangs. Assembly requires M4 bolts and self-locking…
Hook for Bordo bicycle lock bag. As the rubber of my BORDO bicycle lock holder has torn out, the original hook did not hold anymore and I designed and printed this one. OpenSCAD file included, feel free to modify. If you like my design,…
I printed it in TPU so it would be more resistant to rattling and impacts. Print it in upright position to avoid any supports. It can be mounted either screwing it to a bottle mount with some shallow bolts or using zip ties.
This is a Holder for the popular (at least in Germany) Abus Bordo on a Xiaomi Scooter (1s). Its designed to go near your Dashboard so pretty high on the Handlebar. During testing i noticed that the clicky noises of the Lock that it…
Created a two piece version (parts are identical) to minimize filament and simplify install so it can be easily adapted to any mount pattern (without reprint) and tube diameter (parameterized). Provided a 53mm version for my bike, but if…
=== ENGLISH === This model allows to carry a large ABUS Bordo foldable bike lock in a bottle cage. So you can carry your lock when commuting to work and a bottle durinig your the hot summer week-end ride. Make sure your bottle cage is…
ABUS Bordo Folding Lock Clip A friend kept losing this clip on his Bordo Folding Lock (it seems to like to fly off). He asked me to design and print a few replacements for him. Here is the original compared to the 3d printed part Printing…
Hi fellows, i lost my original bike bracket of my abus lock. I printed this one for my Abus Bordo X-Plus 850mm. I guess it also fits on the longer ones. Printed in eSun ABS+ Black. I used two 2x screws M5 ISO 7380-1 A2 V2A Stainless Steel…
An alternative bike lock mount for the Abus Bordo series. I wanted something more open and easy to access then the provided lock mount/pouch and designed this instead. I reused the Abus mounting strap and metal stiffener in my design.…
The ABUS Bordo Lite comes standard without any dust cover for the keyhole, leaving it exposed to weather and dirt, especially when attaching it to a bike without mud guards like a Gravelbike. This very simple dust cover is simply inserted…
Created the clamp as the original tends to break. I printed mine with PLA and it still works great after months of daily use. Needs some supports.
