47 modeli
THIS PROJECT IS ON PAUSE I just don't have the time anymore right now. I regularly get messages from some of you for the source files. So I released them in the zip-archive called "source" as .ipt (Autodesk Investor) and .stp. Right now I…
I used support for the helmet and chest armor
A faithful re-creation of the brotherhood logo from various fallout games / media STL and STEP file included for both versions pictured print instructions: some parts are pretty thin so maybe use a 0.12 setting for layer height and a good…
Print laying flat For best look use the filament change function in the slicer to make the logo dual color I changed the bridge angle in the advanced settings to 45°
This digital model showcases the T-60 Power Armor , one of the most powerful and iconic suits from the post-apocalyptic world of Fallout . The model is presented in a combat stance on a themed base that instantly identifies its origins.…
This a tile holder for Assasin's Creed: Brotherhood of Venice. You can place the roof tiles on it to create a better view of the game. 2020-10-03 Test print came out a bit too small, adjusted it so all sides measure 100x100 mm. Also…
Print in single color or AMS 2 color. Designed to fit the 6mm rings on keychains. From the Fallout video game faction. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (…
Last of my 3D scanned D&D minis from the '80s. This is the lone remaining model I have from the Elves of the Silvan Brotherhood set (6003). This is model E2 "Battleaxe". Category: Toys & Games
This is part of our [Full Metal Brotherhood] ( https://www.myminifactory.com/frontier/full-metal-brotherhood-wargame-bits-vol-v-stl-models-for-tabletop-wargaming-1797 ) project! Subscribe to our Patreon or Tribe for better value because…
A 40 mm fan guard with the Brotherhood of Steel emblem. Made with Inkscape and Blender. The .blend file can be directly exported to STL; just make sure to adjust the units as appropriate. You can also render it to produce the thumbnail…
Stamp inspired by the note left at the start of the Dark Brotherhood questline in The Elder Scrolls: Skyrim. Prints best with the stamp pattern facing up. No supports required. Print the stamp insert with TPU, gently sand the stamp…
This is my next Fallout extruder visualizer, this time in the style of the Brotherhood of Steel organisation like in the Fallout game series. This print needs a color swap and i suppose to use black and white, but it is up to you what you…
Lucky 13 Brotherhood of Steel Stand
Player Dashboard for the boardgame Assassin's Creed: Brotherhood of Venice. I adjusted it so it should fit sleeved cards. Character card can be used horizontally or vertically.
My friend's key for the jack-in-the-box that comes with the Collector's Edition of Assassin's Creed Brotherhood for Xbox 360 broke, and even after gluing it it wasn't strong enough, so I modeled, printed and painted a replacement. Noticed…
Small Keyring Printed in Pla
-Fan Art- Stencil of the Brotherhood Of Steel Crest to decorate your wall. Just hang it on a nail on your wall. You can scale it to the size you want if you keep the aspect ratio. The heigtht is only 1,4mm (7 layers). If you scale the…
Keychain with the Brotherhood of Nod symbol from the Command and Conquer games. Print the first half in red and the second half in black. I added a 3mf file with a material change.
Brotherhood of the Cruciform Pendant(s), Indiana Jones and The Last Crusade Category: Props
Made a sign that resembles the message the dark brotherhood sends you in Skyrim as you start that storyline. You may want to scale down the Z axis, its a little tall for push pins but still works.
This is a Christmas tree ornament inspired by the Fallout game series and will easily print on most FDM and resin printers
This is my first attempt to "remix" a model. The original model was a wax seal stamp, and as soon as I saw it, I immediately knew I wanted to make it into a coin. This model has options to print in multiple colors if your printer has the…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 Swap…
3d Printable tower for Assassins Creed, Brotherhood of Venice board game, the tower should be cut in your slicer at the bump to make it small enough and to preserve print quality. The tower can be printed with no supports and the only…
I wanted to convert my earlier Brotherhood of Steel fan guard to a different size, and decided to make a customisable version with OpenSCAD. Key features: Freely sizeable grille Scaleable and moveable emblem Gears and wings can be cut out…
Small hiding spot for Assassins Creed Brotherhood of Venice to be printed without supports. I hope you like it!
I made this kind of keychain for myself and added a little black color with a marker. U can make 2 types of keychain: 1. Use the usual file and done, but u might not like 1 side(bottom one) 2. And a little complicated, just print twice…
Check out my cults3d page, it has a lot more files https://cults3d.com/en/users/ItsTheBot/3d-models
This is a stencil for the symbol from the Lyons' Pride unit from Fallout 3! Minor connections have been made so it's not exact from the game, but very close. The original image is of course not owned by me - it's a fan recreation for fun.…
Hi everyone! As a fan of the Final Fantasy saga, I wanted to design and recreate the "Brotherhood" sword as faithfully as possible. It took many hours of modeling, and while there are a few minor imperfections, I can guarantee that the…
Just Extra cubes if you lose any that come with Assassins Creed Brotherhood of Venice, I recommend printing them with transparent red or white.
Created using Image-to-STL tool and extruding based on the color choice. Layer changes: 0-10 - black PLA 11 - 17 - Grey PLA 18 - 20 - Blue PLA 21 - 35 - white PLA Technically you could use yellow for parts of the sword handle as well but…
Brotherhood of Steel Texture Palette Prime first
Image has been slightly inset to allow multi color. Print face down on a smooth plate if you want a smooth finish
A maker coin for all my Essentials working through this Covid 19 scare
BOS themed HyperX buttons and covers.
Hueforges can be resized, only change the X and Y scale, leave the Z height the same. Fallout - Brotherhood of Steel Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may…
200MMX200MM BROTHERHOOD WE TRUST TRAY
170MMX170MM BROTHERHOOD WE TRUST TRAY
This sword is modeled from the manga and anime. I made the blade asymmetrical out of preference, but the handguard is close. I made this really quickly, ahead of the spooky night, so it is a bit rough. I plan to make the blade out of…
3d Printable tower for Assassins Creed, Brotherhood of Venice board game, the tower should be cut in your slicer at the bump to make it small enough and to preserve print quality. The tower can be printed with no supports and the only…
Small hiding spot for Assassins Creed Brotherhood of Venice to be printed without supports. I hope you like it!
This is a stencil for the symbol from the Lyons' Pride unit from Fallout 3! Minor connections have been made so it's not exact from the game, but very close. The original image is of course not owned by me - it's a fan recreation for fun.…
This digital model showcases the T-60 Power Armor , one of the most powerful and iconic suits from the post-apocalyptic world of Fallout . The model is presented in a combat stance on a themed base that instantly identifies its origins.…
A faithful re-creation of the brotherhood logo from various fallout games / media STL and STEP file included for both versions pictured print instructions: some parts are pretty thin so maybe use a 0.12 setting for layer height and a good…
