Liczymy pasujące modele…
This fitness-inspired pen holder features a highly detailed muscular torso, designed for gym lovers, bodybuilders, and anyone who lives the fitness lifestyle. With exaggerated anatomy and a bold, powerful stance, it brings strength and…
Best printed in PETG, per usual so that the joints do not weaken nearly as fast over time. I am currently experimenting with different file types on a quest to find one which keeps the colors of the model. But as of now, I have not found…
all the parts you need to build a snap together dino
Grinch Bodybuilder flexing his massive muscles!
Filament guide ….. Imperfect design, can probably be worked but certainly does the job after some elementary tinkercad designs to make it fit a 3d20 idea builder
This insert fits in the gaping pit that holds the player pieces in the Kingdom Builder Big Box 2nd Edition. This essentially turns that section of the factory insert into a two level section with an identical set of 6 areas for holding…
3D model of a replacement foot pad for the Dremel 3D20 Idea Builder. In case you lose one of them like mine did.
Fits Dremel Idea Builder 3d20. Should also fit Flashforge Dreamer Fits a caliper with a 30.5mm wide body. Designed for VINCA DCLA-0605
Turn your desk into a kinetic playground with Marble Mayhem: Modular Track Builder — a customizable system of tracks, obstacles, and supports designed for endless experimentation. Each piece snaps together using sturdy pin-based supports,…
Flexing Bodybuilder Statue - a decorative print, perfect as a desk or shelf decoration.
Clamp/wall mount designed for the amazing Stargate by @Gatebuilder https://www.printables.com/model/1333011-stargate-sg-1-kit 2 M3 x 16mm bolt by clamp (optional)
Pixel Builder The Pixel Builder is small little pieces that you can build anything with where the only restriction is your imagination! These little pieces can be printed in different colors or painted or colored so you can 3d print with…
🚨 WANT TO SELL MY 3D PRINTS? Join my $2/month Buy me a coffee membership and start making money with my models! Step 1:Left click on plate 1 (this will be the main build plate) Step 2: Right click the letters needed one by one and "Clone"…
These models are intended for decorative and display purposes and can be freely scaled or customized for personal projects. 📃 Usage & Licensing 🔹 Personal Use: You may print and display this model for your own enjoyment. 🔒 Commercial Use…
Use supports with 2mm x/y distance from the model so it will be easy to remove them or refer to attached .3mf file. If you would like to support me - you can buy me a coffee :) Please try to share photo of your print <3 Check out my other…
Turn your desk into a kinetic playground with Marble Mayhem: Modular Track Builder — a customizable system of tracks, obstacles, and supports designed for endless experimentation. Each piece snaps together using sturdy pin-based supports,…
Unleash the power of incredible physique artistry with this stunning muscular bodybuilder 3D print model that brings championship-level detail to your workspace! This impressively sculpted STL figurine showcases every rippling muscle and…
This is a modified model of the Hytale Builder Bench with detachable items. Glue in place or leave as detachables. Dimensions: 6cm (2.36") wide by 3cm (1.18") by 5.6cm (2.2") tall. Supports: if not using the support version, use supports…
This fusion file lets you design your gate just how you want it for the Bibben FDM GCC shell. You can remove individual notches, adjust the position of individual notches, and more. the only different between the three example models, is…
This fusion file lets you design your gate just how you want it for the HHL GCC shell. You can remove individual notches, adjust the position of individual notches, and more. the only different between the three example models, is that…
Maze Builder is a fun and educational game where kids build their own mazes using puzzle pieces. Players connect colorful paths, curves, and splits to create a unique maze, then race to solve it. Perfect for developing problem-solving…
Simple, but dynamic column builder library. Inspired by: Wikipedia Artwork and this preview . I've uploaded a couple ready-made column design as stl files, but you probably want to download the .scad file and open it inside OpenSCAD .…
The game file for the armies, a component in Worldbuilders, the new 3D printed board game. All information about colors, quantity and usage is listed in the attached pdf file.
The game file for the game board, a component in Worldbuilders, the new 3D printed board game. All information about colors, quantity and usage is listed in the attached pdf file.
The game file for the castle, a component in Worldbuilders, the new 3D printed board game. All information about colors, quantity and usage is listed in the attached pdf file.
The game file for the claim token, a component in Worldbuilders, the new 3D printed board game. All information about colors, quantity and usage is listed in the attached pdf file.
The game file for the coins, a component in Worldbuilders, the new 3D printed board game. All information about colors, quantity and usage is listed in the attached pdf file.
The game file for the dice, a component in Worldbuilders, the new 3D printed board game. All information about colors, quantity and usage is listed in the attached pdf file.
The game file for the forest, a component in Worldbuilders, the new 3D printed board game. All information about colors, quantity and usage is listed in the attached pdf file.
The game file for the mountains, a component in Worldbuilders, the new 3D printed board game. All information about colors, quantity and usage is listed in the attached pdf file.
The game file for the obstacle walls, a component in Worldbuilders, the new 3D printed board game. All information about colors, quantity and usage is listed in the attached pdf file.
The game file for the palisades, a component in Worldbuilders, the new 3D printed board game. All information about colors, quantity and usage is listed in the attached pdf file.
The game file for the river, a component in Worldbuilders, the new 3D printed board game. All information about colors, quantity and usage is listed in the attached pdf file.
The game file for the exchange market sign, a component in Worldbuilders, the new 3D printed board game. All information about colors, quantity and usage is listed in the attached pdf file.
The game file for the forest market sign, a component in Worldbuilders, the new 3D printed board game. All information about colors, quantity and usage is listed in the attached pdf file.
The game file for the mountain market sign, a component in Worldbuilders, the new 3D printed board game. All information about colors, quantity and usage is listed in the attached pdf file.
The game file for the repair/fortify market sign, a component in Worldbuilders, the new 3D printed board game. All information about colors, quantity and usage is listed in the attached pdf file.
The game file for the stack guide sign, a component in Worldbuilders, the new 3D printed board game. All information about colors, quantity and usage is listed in the attached pdf file.
The game file for the village market sign, a component in Worldbuilders, the new 3D printed board game. All information about colors, quantity and usage is listed in the attached pdf file.
The game file for the volcano market sign, a component in Worldbuilders, the new 3D printed board game. All information about colors, quantity and usage is listed in the attached pdf file.
The game file for the village, a component in Worldbuilders, the new 3D printed board game. All information about colors, quantity and usage is listed in the attached pdf file.
The game file for the volcano, a component in Worldbuilders, the new 3D printed board game. All information about colors, quantity and usage is listed in the attached pdf file.
The game file for the wood, a component in Worldbuilders, the new 3D printed board game. All information about colors, quantity and usage is listed in the attached pdf file.
The Spaghetti Builder is a modular connector for constructing towers using Spaghetti No°5. It is designed to teach structural engineering concepts through hands-on activities. The 3D-printed connectors are easy to print without supports.
UPDATE (01/12/2025) - I've added a more traditional nosecone for this model which is the same (in scale) as the FatBoy nosecone. The existing AV Sled or Plug will work in either nosecone. ----------------------- This is the Menace. It was…
Introduction: Inspired by the 4-in Crayon Bank Rocket, this rocket was designed from the ground up to be a park flier and/or show-stopper at your next club event. The Extreme Series of Builders Kits were designed for easy printing,…
This post is an advanced publishing for the Rockety Forum members. You are welcome to download and enjoy the parts, but I am not supporting them unless you contact me via my build thread on TRF . When I release this model to the general…
A fin can, nose cone, and launch lugs you can print to build a rocket from a can of hyperbolic paraboloid potato crisps. You'll provide the can, motor mount, shock cord, motor retainer, and other parts. This is an example for people…
Exigence Were you a kid in the beginning of the 21st century? If you were, you probably had (or at least knew about) those telescoping plastic lightsaber toys. However, what you may not have known was that they were the most successful…
With this web application you can create vases based on math functions. Open VaseBuilder
Replacement wheel and axle for IQ builders set like (https://iqbuilder.com/). I printed them in PLA and seem to be OK.
Removable Gate OEM is a project designed to bring the removable gate system to OEM Gamecube Controller shells in the form of a small DIY kit. This is a parametric notch builder tool that allows you to make uniquely notched gateplates that…
This is a hands-on educational game designed to help children practice building and pronouncing CVC (Consonant-Vowel-Consonant) words. The game includes letter tiles that can be rolled and arranged in the CVC format. To aid learning,…
Un adorabile e muscoloso gatto che mostra i suoi bicipiti scolpiti! Perfetto come decorazione da scrivania, regalo divertente o mascotte motivazionale. Questo modello unisce la dolcezza felina con la potenza di un vero culturista. 🖨…
Funny model of ripped Pikachu. Can print without supports. You find it on my video:
We have so many Kingdom Builder expansions, that I have made full sets of pieces in 10 different colors. We just include about the same number of boards as we have players – fewer if you want to be more competitive, or more if you want a…
Tamiya 74023 BUILDER'S 8 pc Screwdriver set holder, usefull to replace the original plastic one.
ENGIN 29 Prusa 3D Printer & Spool Holder Laser Cutting DXF File
For Copies of empire Builder that are in a poster tube. Print 3 of EBChitL2ByV3 as the lid Print all 3 of EmpireBuilderTokens2ByXof3 for unique boxes that label the resources in alphabetical order If you don't want labelled slots, print 3…
A modern decoration or a fun Easter gift – the fitness bunny. You can make the bunny more or less colorful depending on your taste. It also looks great in a single color. Everyone can customize it according to their own preferences and…
This is a container for the Kingdom Builder board game that hold the houses and fit nicely within smaller section of the box. These have slide-on lids so that the houses won't spill out if the game box is tipped or shaken. I printed them…
Introduction The Mystic is an upscaled clone of the Estes Majestic Pro Series II kit. It includes all the parts to build, minus the tubes and other accessories. Below is an overview of the parts, print setting recommendations, a list of…
Pickaxe and shovel for board game Minecraft Builders and Biomes Junior in the same scale as original foam props. You can use just the STL file and paint it (as I did for example) or you can use the multimaterial Gcode - ready for 2 color…
My version of a mold for a Dremel/Flashforge and possibly other mk10 style hot-ends. I use Red Permatex high heat RTV and it's worked quite well. The trick I found that made all the difference is dipping both parts of the mold in diluted…
Original https://www.thingiverse.com/thing:5356923 These are the seperated files. MM files no longer have color change.
Printables re-post of a model I created and posted to Thingiverse on 2020-09-23: https://www.thingiverse.com/thing:4604377 My nephew got one of these IQ Builder STEM Learning toy sets (Amazon link below), and 3 of the 4 axles broke within…
100x160mm sign, reading “Dr Frankenstein the best Body Builder” with art of a blue ribbon and the face of Frankenstein's monster. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode.…
Clamp/wall mount designed for the amazing Stargate by @Gatebuilder https://www.printables.com/model/1333011-stargate-sg-1-kit 2 M3 x 16mm bolt by clamp (optional)
A gun from the game Pinewood Builders Computer Core. First Model I have made so its not that good. I havent tested it yet possibly not symmetrical I don't know
Buy the full version on Cults3D! Visit my store for paid models! https://cults3d.com/@1xmerch
Lokomo was one of the “big two” locomotive and rollingstock manufacturers during the steam era in finland along with Tampella. Besides railway equipment, Lokomo also made tools and cranes for the heavy-industry along with construction…
A small square with holes for pins or thumb tacks to allow it to be attached to a building board. Can be used as a simple square for aligning parts. Print extras.
Storage box for the Carcassonne Expansion 2: Traders and Builders Box Box is designed for the 2025 renewed edition (C3.1). It is also compatible with older Traders & Builders versions. Place one land tile in the river tile slot, and note…
Here's my take on the old school hot wheels track builder kit I had as a kid. The track profile matches and is compatible with the newer, slightly narrower, track available today. The pictures and YouTube video links below show all the…
CaseBuilderLib2 Design 3D printed cases for random things! How to use this library: Preparation Make a copy of the CaseBuilderLib project template ( CaseBuilderTemplate.scad ). The template is intended to be used with the OpenSCAD…
See image for slicer settings and material. Parts required for mounting onto T-Slot Aluminum Extrusion… M5 x 10mm Hex Countersunk Screws: https://www.amazon.com/iexcell-Thread-Socket-Screws-Finish/dp/B0D77PPKNX/?th=1 T-Nut:…
Holder for Builder Square. I made it for my Empire Builder Square. Print with tree support on build plate only. 18 Nov UPDATE : added bumpers to reduce tilt.
Design Concept The low-poly style aims to highlight the simplistic yet bold features of a bodybuilder, capturing strength and definition with faceted geometry. Purpose This model is perfect for those seeking a decorative piece or…
Face plate for a crate or box containing Treadwell Droid or parts.
If you like the model, you can support me by nominating my profile or this model. Thank you! Thank you for downloads, likes… Enjoy !
If you like the model, you can support me by nominating my profile or this model. Thank you! Thank you for downloads, likes… Enjoy !
This comprehensive organizer insert for Minecraft: Builders & Biomes is designed specifically for advanced 3D printer users who value material efficiency and print quality. Key Features Support-free printing - All components print without…
