Liczymy pasujące modele…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
I needed some hand models with different numbers of fingers raised. I Couldn't find ones I liked, so I made some using DAZ Studio. These need to be printed with support (except #5 and the Vulcan salute). See…
Inspired after my little cherry tree... I designed this "cherry bunch." This Cherry Bunch is a “proof of concept” ... for a course I am teaching... Please, do not modify or resell or distribute my model on any other 3D model website. *…
Print instructions Print Settings: 0.20mm Filament: Prusament PLA Printer: MINI Supports: Everywhere Infill: 20% to 30% Brim: No Time: 90 Minutes
Could not find a decent model of a bunch of bananas on the Web-verse so I made this.
The Brady Bunch - Marcia Brady - 1969-1974
Remix, same 100mm tall, 98mm at the top, 65mm at the base, 1.6mm thick with a 1.6mm embossed extrusion. Holes in base and side. Pictures to follow once printed Using left over PLA+ Marble. but other colours available. Sunlu 10% off at…
The Brady Bunch - Jan Brady - 1969-1974
The Brady Bunch - Peter Brady - 1969-1974
If space is of your concern you might want to consider to hang your pens instead of wasting desk space. I use wood beams (44mm x 24mm x 2000mm) between a wall and a shelve to store boxes of stuff (e.g. filament). To make use of the space…
This is a 3D-printable smile mouth , designed specifically to fit Bunchems (the small spiky balls that stick together). The mouth features a simple snap-fit design that presses gently into Bunchems without glue , making it reusable and…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Ni No Kuni inspired, Green Buncher, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other…
There is no arguing that Bunch O Balloons is a brilliant, fantastic product. There is no better way to get ready for a water fight! My only issue is that the ‘tubey’ bit goes to waste. While I was trying to think of a good way to reuse…
A bunch of gridfinity baseplates from 1x1 to 6x6
11x6 array because spending $8 at Home Depot would too easy and I need to justify the cost of this hobby.
++Update 20/04/2025 Front barrel holder is split into top and bottom so that you can print them vertically to strengthen the fingers Added expanded grip with expanded battery cover. Note that the battery cover is held in by M3 screws…
zoro and luffy jolly roger , umbrella corp ,speedmaster charm , ironman arc reactor , batman , superman fridge magnet and 3 swords keychains from jujutsu kaisen , naruto and berzerk and valorant gun buddy keychain
small copies of battlebots, bite force, tantrum, bronco, hydra, yeti etc...
UPDATE: Fusion 360 Archive updated to v11 → Bugfixes Hello I seem to never have a fitting box for my stuff, so I made these in Fusion 360 to be easily modified. The dimensions in the name are the OUTER dimensions (mm). 45x150x30 for…
After setting where motorized or non-motorized flying model. Ease of construction, saving basic and cheap model making hobby.
This is a 3D-printable pig nose , designed specifically to fit Bunchems (the small spiky balls that stick together). The nose features a simple snap-fit design that presses gently into Bunchems without glue , making it reusable and easy…
A bunch of boring bases for D&D miniatures. From 1" diameter to 4" diameter. Not sure the world needs more of this but
Simple but practical battery storage solution. The corner cut out is just dead space, but I use it for misc button batteries.
These are 3D-printable eyes with eyelashes designed specifically to fit Bunchems (the small spiky balls that stick together). The eyes are sized to press gently into Bunchems without glue, making them reusable and safe for creative play.…
These are 3D-printable narrow eyes , designed specifically to fit Bunchems (the small spiky balls that stick together). The eyes have a simple, round and narrow design , intended as a clean and minimal alternative to larger eye models.…
Tv heads for robotics team
A thing to hold Enduro Bearings' Stainless Steel Bearing Bunch Set (BRT-030). Bin size is 4x5x3.
These are 3D-printable horns , designed specifically to fit Bunchems (the small spiky balls that stick together). The horns feature a simple snap-fit design that presses gently into Bunchems without glue , making them reusable and easy to…
These are 3D-printable hearts , designed specifically to fit Bunchems (the small spiky balls that stick together). The hearts feature a simple snap-fit design that presses gently into Bunchems without glue , making them reusable and easy…
Just some fonts I have been playing with and would like to share. Maybe could be used outside as wall art on Grandad's Shed as an example
These are some dominos I made in tinkercad for a contest here on printables. (It didn't meet the criteria apparently). I have not physically tested them, but I'd print them at a higher infill for a bit of weight. If you have trouble with…
just a simple wall art, can be scaled bigger or smaller
These are 3D-printable eyes with eyelashes designed specifically to fit Bunchems (the small spiky balls that stick together). The eyes are sized to press gently into Bunchems without glue, making them reusable and safe for creative play.…
small copies of battlebots, bite force, tantrum, bronco, hydra, yeti etc...
Print instructions Print Settings: 0.20mm Filament: Prusament PLA Printer: MINI Supports: Everywhere Infill: 20% to 30% Brim: No Time: 90 Minutes
Hi guys, enjoy simple set of desk organizers for Your cool items ; ) Sizes: Tall: 20x20x30mm 30x30x50mm 50x50x80mm 80x80x100mm Flat: 20x20x10mm 30x30x10mm 50x50x15mm 80x80x15mm Powered by MakerWorld-Make My Desk Organizer
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions (add pauses in your slicer at the numbered layers below and swap colors): Start with Black At layer #8 (0.72mm) swap to Green At layer #11…
Customized version of http://www.thingiverse.com/thing:83812 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=83812 This is the first thing I thought of when I saw brainbounce's lithopane gallery…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/2znmK4KtIys Print Settings Printer Brand: Printrbot Printer: Simple Black Rafts: Yes Supports: No Notes: Printed on the Printrbot Play. Category: Earrings
You can put an identifier or a small cap on your keys and still lose them. Put the whole bunch of keys under the cap and hang it around your neck. Everyone can choose their favorite colour. Especially useful for children. Print…
8mm holes of 24 core stack up, 30mm long made it for my ex tech for laying cable fit for Cat6, seems not well for Cat6A
Bunch of buckles and connectors I used for adding a shoulder holster to a mens' handbag.
printing settings resolution: any rafts: does not need any supports: no need for that! and infill is 15%
it's a bunch of headphone stands, a book sorter, a phone stand and a mount for a usb hub
