P
Printables
Cableholder
Kabelhalter für eine Tischplatte mit der dicke von 2cm oder mehr. Ich Empfehle das Neue Modell zu nehmen da beim Alten es Passieren kann das das Kabel rausrutscht. Andere höhen werde ich bald hochladen (1cm,1.5cm,2.5cm).
Wyniki wyszukiwania: cableholder
Liczymy pasujące modele…
P
Printables
Cableholder For Plug Type N
For plug type N, 3 round pins The model in version v3 offers improved fixation. No supports needed. Quick and easy to print.
P
Printables
Cableholder with logo audi
if you have an audi then i have donne your work and made it with an audi logo. go back to the original model for more information.
P
Printables
Cableholder for standing lamp
Supports two long USB cables with lightning or USB-C connectors, and keeps them from dangling on the floor.
P
Printables
CableDock C System – Desk CableHolder with C-Clamp
CableDock C System is a compact and modular desk cable holder , designed in Fusion 360 to keep your cables organized, accessible, and always within reach. The main support attaches to desks, shelves, or any flat surface using a C-clamp…
P
Printables
Universal Cableholder with Zipties
Hi! I needed a good way to mount some Cables inside a 19" Rackmount. So I came up with this design. The big hole is for the ziptie, the small one for your screw. You can remix this design for your Use. 3D File is available. It would be…
P
Printables
LD Cooling CPU Kabelhalter Cableholder
Kabel sollten immer irgendwie geführt werden. Hierfür ein kleines Teil was das CPU Kabel an der Seite festhält. Benötigt wird: 1x Einschmelzgewinde/Short m3 1x m3 6mm bisschen 1mm Moosgummi (optional)
P
Printables
Focusrite Scarlett Solo 4th Gen desktop stand with headphone cableholder
Desktop Stand for the Focusrite Scarlett Solo 4th Gen
P
Printables
Guitarcableholder wall
A wallmount for guitarcables with a slot for the audiocable you have to put the audiojack part into the cylinder with the side that has no cutouts pointing at you. I used superglue to secure both parts together
P
Printables
Cableholder
Kabelhalter für eine Tischplatte mit der dicke von 2cm oder mehr. Ich Empfehle das Neue Modell zu nehmen da beim Alten es Passieren kann das das Kabel rausrutscht. Andere höhen werde ich bald hochladen (1cm,1.5cm,2.5cm).
P
Printables
Parkside Soldering Case w. USB-C r. CableHolder
Changes & Printing Notes: Integrated USB-C port for a clean and precise fit. Cover for the USB-C port added, which must be printed separately in TPU . The TPU cover is designed to be pressed firmly into the slot , ensuring a secure hold.…
P
Printables
UniversalCableHolder_3_slots_3mm_holes
Remix of the original desing with two 3 mm holes for mounting it using screws.
P
Printables
Tesla S Center Console Cell Phone Cableholder USB Type C (2015 center console)
Prints as is, might be a thight fit for the usb-cable depending on the type you buy. But mine fits perfect :) This allows you to use a Type C usbcable since Tesla does not provide this cable and clips for mounting it in the original…
P
Printables
Cableholder for nut10 aluprofiles
Hello, my father asked me to print this cableholder for his newly build solarpannels so that he can insert theses into the aluprofile and can use cablebinder to secure the cables on the underside of the aluprofiles. to use them you just…
P
Printables
Cableholder
Basic cable management for your antenna cable around the room. Requires a small nail to hold to wall. Category: Electronics
P
Printables
Cableholder
This is a usefull cableholder for 3 cables. Please give me advice, if it's not working out very well and have fun to print ;-)
P
Printables
Type 2 Cableholder (remix)
Remix of the Type 2 Cable Holder from Elektrofix-OL on thingiverse 90° Plug Holder, seperated in two pieces for easier print, glue and screw the two parts together larger Cable Holder
P
Printables
Renk100CableHolder
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/0Vc1E221CLv Category: 3D Printing
P
Printables
Cableholder For Plug Type N
For plug type N, 3 round pins The model in version v3 offers improved fixation. No supports needed. Quick and easy to print.
P
Printables
Cableholder with logo audi
if you have an audi then i have donne your work and made it with an audi logo. go back to the original model for more information.
P
Printables
Cableholder for standing lamp
Supports two long USB cables with lightning or USB-C connectors, and keeps them from dangling on the floor.
P
Printables
CableDock C System – Desk CableHolder with C-Clamp
CableDock C System is a compact and modular desk cable holder , designed in Fusion 360 to keep your cables organized, accessible, and always within reach. The main support attaches to desks, shelves, or any flat surface using a C-clamp…
P
Printables
Very simple cableholder
I was looking for a simple and effective way to quickly store a cable with a USB adapter. Although there are many models available, I was looking for something faster and came up with this idea. The holes are conical to make it easier.…
P
Printables
Cableholder
A cableholder that works just fine but you need to put a rubber band over the cables if the are to small
P
Printables
Gridfinity Cableholder 6x
Hier mein kleiner aber feiner Kabelhalter für das Gridfinity System, hält bis zu 6 Kabel. Einfach Kabel zusammenfalten (wie meist original verpackt) oder aufrollen und fertig. Größe 3x4 Viel Spaß
P
Printables
1x2 Gridfinity Cableholder
A great way to quickly get cables organized while fitting into the gridfinity system.
P
Printables
Deltaprintr Cableholder Aluminium Extrusion
V1.01 Added a Lid to slide onto it. A Cable-Holder for the Deltaprintr. It clips on the aluminium extrusion. I remixed it from the "DeltaPrintr SD Card Adaptor Holder" by Costfu Works good in combination with a strud clamp either…
P
Printables
Simple cableholder printed in one piece
A simple cableholder on your desk. This can be attached with double-sided tape. I printed it with 0.3mm layer height and without brim.
P
Printables
"The G" Cableholder V4
With Screwhole (perfect fit for e.g. 3x13TX10) Screwhole reachable with Long-Bits or with small Bitholder Prints fast an reliably on my MK3S+ (PLA 0,3mm Draft with 20% Gyroid-Infill G-Code included)
P
Printables
Anycubic Vyper cableholder guide
This is a simple part to fix the cable to the x-carriage. U can use the existing screw of the Printer and a cable tie.
P
Printables
Cableholder for HyperX CloudX
I have constructed a holder for the jack connector of the Hyperx Cloudx plug. The holder has a diameter of 8.7mm so that the plug has a tight fit. the holder is screwed with 2x 3.5mm wood screws.
P
Printables
Cableholder
Cable Holder This is a holder for Cables . The 3mf-File was used for this print. I used PLA with a Prusa Mk3s MMU2s and had no problems. Hope this helps you.
P
Printables
Ring-Cableholder
Ring-Cableholder This is an holder for cables . The 3mf-File was used for this print. I used PLA with a Prusa Mk3s MMU2s and had no problems. Hope this helps you.
P
Printables
Anycubic Mega X Bed Cableholder
Kabelhalter für das Bed des Mega X zum Schutz vor Kabelbruch am Headbed. Cable holder for the Mega X bed to protect against cable breakage at the headboard. Print in PETG / no Supports
P
Printables
2 in 1 Rackmount poweroutlet and cableholder
I bought a rackmount poweroutlet to use for my pc setup, i wanted to mount it under my desk. so i made these diffusers for the screws to go through. i printed extra to guide those cables nicely under the desk.
P
Printables
Solder Cableholder
When you want to solder two cables together and dont have four arms to both solder and hold the cables. All kind of cables fit into the different slots. A "helping hand" can damage your cables, especially if the cables are hot. This…
P
Printables
V-Core 3.1 Z Arm Cableholder removable
If you ever need to remove the heated bed, you no longer need to cut off the cable ties
P
Printables
USB Cableholder
With this transport mount, your usb cable will survive even longer trips. The bracket is designed for short and thinner usb cables with different connectors (have a look at the pictures). You need some support structures for the two…
P
Printables
Universal Cableholder with Zipties
Hi! I needed a good way to mount some Cables inside a 19" Rackmount. So I came up with this design. The big hole is for the ziptie, the small one for your screw. You can remix this design for your Use. 3D File is available. It would be…
P
Printables
LD Cooling 24 Pin Kabelhalter cableholder
Viele mögen sagen “völlig Sinnfrei” dennoch hat mich das Kabel gestört wie es so unsauber rumhieng. Ihr benötigt: 2x m3/short (4mm) Einschmelzgewinde 2x m3 6mm Schrauben. 1mm dickes Moosgummi, dann verkratzt man das Gehäuse nicht.…
P
Printables
LD Cooling CPU Kabelhalter Cableholder
Kabel sollten immer irgendwie geführt werden. Hierfür ein kleines Teil was das CPU Kabel an der Seite festhält. Benötigt wird: 1x Einschmelzgewinde/Short m3 1x m3 6mm bisschen 1mm Moosgummi (optional)
P
Printables
UnderdeskCableHolder_V2
Print PETG or ASA. Maybe PLA? Mount with two screws with 4mm diameter.
P
Printables
cableholder for cardboard
at work we assemble our Computers ourselves. because there isn't always room for power cables in the box, a solution had to be found to attach the cable outside of the box. This is my first prototype with spikes that dig into the box.…
P
Printables
Ender-3_S1_pro_GulfCoastRibbonCableHolder
Ender-3 S1 pro Gulf Coast Ribbon Cable Holder. I did not care for theirs so I designed my own. Category: 3D Printer Parts
P
Printables
Cableholder Poolcleaning Robot
the problem needs to be solved my family says to me, so i got to my pc and designed a replacement cable holder for our poolcleaning robot! turned out really great i suggest using petg and about 40% infill with 100% infill anker and it…
