Liczymy pasujące modele…
Printed in PETG, 100% infill out of respect, maybe not necessary. I can't draw so the image is from the web: https://www.scrappindoodles.ca/products/canadian-money-clipart-currency-graphics-play-money-cartoon-cash-commercial-use-png…
These little one-room buildings were found in many western Canadian prairie towns in the early years of the 20th century. This model is based on photos and fire insurance maps from the towns of Watrous and Vonda, Saskatchewan, from 1908…
I typically get small bills for my little projects for people. So i figured I would stash them in a way i wont spend them till they stack up. Wasnt a existing file i liked, so i'll share mine. Made for Canadian bills. Printed standing…
I got a request to design a minifigure vest based on the Canadian CADPAT design. Here is my attempt at it. Prints upside down with no supports needed.
Here's a little creation for fans of Heated Rivalry, featuring the famous phrase “Stupid Canadian Wolf Bird” .
I created an automatic Canadian coin sorter for the five main Canadian coins. No supports are needed, but you will need 4 6mm screws to hold both the pieces together.
Unlock convenience on your next shopping trip with this stylish 3D-printed shopping cart coin! No more fumbling for loose change or searching for a keyring – our coin is the perfect fit for most standard carts, ensuring a hassle-free…
Needed something that would allow me to sort/organize my Canadian coins and allow for easy dispensing when I need to grab some coins. Fully open storage stacks allow for viewing of your stash and easy removal of full stacks of coins when…
Zap Rowsdower - The Canadian Chuck Norris, license plate frame, Mystery Science Theater 3000 R.I.P. Bruce J. Mitchell Print Settings Printer Brand: Creality Printer: CR-10S Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 25…
Made of two pieces to avoid support. They snap together so you can glue them, but I prefer to weld them gently with my soldering iron at about 240 deg C. Then the base snaps into the top of the Canadian Tire food tray.
HO scale model of a 1942 Canadian wartime home, based on plans found here: https://www.cbc.ca/news/canada/saskatoon/wartime-homes-in-saskatoon-early-floor-plans-and-design-1.3002019 During and after World War II, the Canadian government…
I needed a stencil of the Canadian Provinces for a children's school project. Couldnt find any stencils on printables to use as a negative part, so I am uploading here.
Printed in PETG, 100% infill out of respect, maybe not necessary. I can't draw so the image is from the web: https://www.scrappindoodles.ca/products/canadian-money-clipart-currency-graphics-play-money-cartoon-cash-commercial-use-png…
Montreal Canadians NHL team golf ball marker (25mm diameter by 2mm height and 10mm spike). 2 versions, SLA and single filament FDM printer version and a second multifilament version. Usage Place on the green to mark your golf balls…
Hello, Today I decided to make a Canadian flag for Bench models. Works Great.
Just another shopping cart coin for Canadian shopping carts. Supports loonie and quarter carts. Spot for lanyard/short chain and a (slightly) textured grip. I had to have some excuse to put my initials on the thing. Print instructions…
Drink coaster in Montreal Canadians team colours and logo. Used general layout and layer measurements from spondoro's various designs. Print instructions Category: Signs & Logos Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts:…
Combination of my Canadian Loonie cart coin without the quarter side which has been replaced with a lotto ticket scratcher. Fits Superstore carts for sure. Not so certain about other ones. Print instructions Category: Hand Tools Print…
A 3D print STL file of Parliament Hill in Ottawa captures the grandeur of Canada’s most iconic government buildings. This model typically includes detailed representations of the Centre Block , Peace Tower , and surrounding structures,…
Canadian flag optimized for layer swap - Swap at layer 11. Two PrusaSlicer 3mf's, one for an IDEX and the other is to pause for filament swap.
No one makes license plate frames for Canadian motorcycles, so I made my own. Recommend PETG as it's more UV-resistant than PLA. Just barely fit on my Ender 3 Pro print bed, with the long side aligned to the Y axis. No support needed,…
In light of current events, I wanted to have something to show a wearable message of how resolute Canadians are! There are two versions: Single extruder manual, layer height filament change. XL auto Multi-colour change. This version can…
money stash that fit Canadian Dollar, grab the holder from the original model
This is a replacement d shaft potentiometer for the Canadian Westinghouse, Hamilton 511A Ch=511 1936-37 Table top Radio. Printed in PLA. Should be in a red brown (could not find a filament close to bakelite material) so used Black.…
After seeing a similar enamel pin for sale, I felt that we need a more accessible 3D printed option. Please print and share to show your support for Canadian sovereignty. Stand strong together for Canada! Printing and assembly. This is a…
Description Quick 5 minute design of a bead sporting the Canadian flag. Print Instructions It's a very small print so the smaller the layer height the better this will look. Full infill is probably the best option. It's a very quick…
I use a kobra 3 and it printed pretty good the red is 0.2mm higher than the white, so essentially you can print it with 1-color 3d printers, just pause the layer and manually switch the filament
This coin holder will hold Canadian dimes, nickels, quarters, Loonies and Toonies. I printed them in PETG as I intend to use them in the car. 0.6mm nozzle, 0.3mm layer, PETG, Sovol SV01
These little one-room buildings were found in many western Canadian prairie towns in the early years of the 20th century. This model is based on photos and fire insurance maps from the towns of Watrous and Vonda, Saskatchewan, from 1908…
More fun with textured brushes. I used a thick fur on this critter but they tend not to be hairy like this. I used a dragon/lizard scale for the tail and for the teeth then pulled them out further with the grab tool. As usual I thickened…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Here is another tree eating water rat. This one has a few more teeth than the last but otherwise I used similar sculpting on the fut and tail. This would have been an extremely fast model but there were a lot of intersections on the tail…
See also “Elbows Up” bead: https://www.printables.com/model/1252713-canadian-flag-elbows-up-beads Beads with Canada Flag on one side, and “Never 51” cast in shadow on the other side. 2 files available for a Horizontal or Vertical Canada…
Made to use with shopping carts in Canada, which require the dollar coin/loonie. Handle for ease of removal and easy storage.
See also “Never 51” bead: https://www.printables.com/model/1251710-canadian-flag-never-51-beads Beads with Canada Flag on one side, and “Elbows Up” cast in shadow on the other side. 2 files available for a Horizontal or Vertical Canada…
Jeu du Tock canadien 2 à 6 joueurs , un jeu de cartes à imprimer est fourni en PDF et publisher.Les pions sont à imprimer 4X6 Canadian Tock game for 2 to 6 players, a pack of cards to print out is supplied in PDF and publisher format. The…
Very simple thin Canadian morale patch. Each file is 0.4mm tall with the entire patch being 0.8mm. Print the patch base file first (in white) and tell your slicer to print the patch content file (in red) 0.4mm higher (e.g. using the Z…
How to print: Start with red filament, then switch to white. Alternatively, you can do the opposite or use your own colors entirely.
This is a shopping cart key for carts that use a Canadian Loonie. It works really well for Superstore carts! Easy to print - only takes a few minutes.
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the Canadian rifleman unit .…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the Canadian SAW gunner unit .…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the Canadian medium machine…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the Canadian Leopard 2a6 unit…
Getting ready for Canada Day with this maple leaf cookie cutter Added a version with horizontal bar to improve strength
Just added the holes. Print how you would normally print the drawer as per chking's instructions.
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the Canadian grenadier unit .…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the Canadian officer/NCO unit…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the Canadian medic unit . The…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the Canadian Carl Gustaf…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the Canadian Javelin team unit…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the Canadian 60mm mortar team…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the Canadian Leopard 2A4 unit…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the Canadian LAV 6 unit .…
Are you ready for Canada Day? If not, you can get there with this flapping floppy Canadian flag!! Printing Instructions: The 3mf file provided was created using Bambu Studio and has the following settings already configured. Layer height:…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the Canadian TAPV unit . While…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the Canadian G-Wagon unit .…
Replaces the center console coin sorter with one that holds Loonies, Twonies, and quarters.
~ 1/2 scale Made COMPLETELY on Tinkercad (including chopper): https://www.tinkercad.com/things/2ZpESAWSAzF-fs-canadian-model-2-3z PRINT ALL PARTS SEPARATE The stator and rotor should fit inside the housing with compatibility with an…
Inspired by MERoy's great little bookmark, I created an equivalent for Candian authors for those so inclined. A fan favourite.
Instructions: Originally printed on a Prusa Mini+, but you can scale the files up or down for your application. NOTE: make sure bed is clean and flat, and you have good adhesion on the 1st layer, there is a lot of fine detail on the 1st…
Coin collection display I made for a friend. Designed for Canadian quarters (but can be scaled to accommodate different coins). Holes to allow for easy removal of coins. Simplified landmasses to single component per province/territory.…
Never get stuck without a coin at the store again! This Canadian shopping cart key is designed to work with both Loonie and Quarter style locks. Simply insert the key, release the cart, and remove it—no coin needed. Compact, durable, and…
No supports required, 2 6x3mm magnets required. A handy portable coin holder for Canadian coins.
To my fellow Canadians. Put your coin troubles behind you. This handy set of nesting trays will quickly sort your loonies from your toonies, and all your other spare change. All it takes is a simple shake. I know we don't use pennies…
Solid milk jug remixed for Canadian milk bag size. Snug fit and solid. PLA settings: 20% infill; brim (to prevent warping since it's a long print); 3 perimeter for wall. Polylite PETG settings: 15% gyroid infill For best results, support…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the Canadian Spike LR2 team…
This model is intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. This model is for the Canadian LTV unit . While…
Canadian Maple Leaf with cavity for incorporating wire to use as jewelry. The leaf is split into bottom and top sections. Print the bottom part, insert your eye pin or other hanging hardware, then print the top layer. Remember to centre…
Designed for multi material (MMU) printers. Visit our website: https://StarLabs3D.com Our YouTube: https://www.youtube.com/@StarLabs3D Help support our design work by visiting our referral links: Upland referral (virtual property trading…
Classic Tock for 3, 4 6 or 8 players. Print center of your choice, and many individual base, goal and run as players. You need: 12 - 32 classic marble 16mm (different colors for each players 1 deck of classic card Goal: Be the first to…
Print Instructions: Print with the number facing upwards. Print the holder standing upright. Assembly Instructions: It will be very tight out of the printer, put the coin in and out of the holder a couple times and the tolerances will…
Macbook stand with Canadian maple motif. The stand can be used for any laptop with a thickness of up to 18mm.
I typically get small bills for my little projects for people. So i figured I would stash them in a way i wont spend them till they stack up. Wasnt a existing file i liked, so i'll share mine. Made for Canadian bills. Printed standing…
I got a request to design a minifigure vest based on the Canadian CADPAT design. Here is my attempt at it. Prints upside down with no supports needed.
Here's a little creation for fans of Heated Rivalry, featuring the famous phrase “Stupid Canadian Wolf Bird” .
Bringing Back A Classic! The OG of Canadian Cigarettes
I designed a filament rack that uses old hockey sticks as the "rods" they can be found behind any rink! Model uses senior sized sticks, most of then fit unless they have a non rectangle size. Cut my pieces to 17" (fits 6 standard rolls)…
The exact height of these are 18mm from bottom of foot to top of head (without helmet) as per 1/100 scale so you may need to slightly alter to fit your own 15-20mm range Edit- M60 added 2019-07-16 M60 kneeling added 2019-07-17 Print…
Meet Lorne the Dapper Canadian Duck and Dougie the Canadian Duck! Celebrate Canada Day or show your Canada pride with a rubber duck dressed up in a suit, bowtie and maple leaf tophat, and another sporting a toque and maple leaf designs!…
This model is a soda can cover that can be used to lift the tab on the can, act as decor to your can, or cover the soda can opening. This file will need supports. We also added a hole so that you can add keychain ring or jump ring to take…
This is a model of a Canadian Armed Forces LUVW (light utility vehicle wheeled) or G Wagon. I made this by converting a free CAD model of a G Class and a lot of trial and error in tinkercad! Category: Vehicles
Canadian Forces B Para Coin Holder When printed, is a perfect snug fit for a B Para Coin. Category: 3D Printing
Royal Canadian Regiment Coaster I whipped up with 3dbuilder and tinkercad. Category: Signs & Logos
I created these "coins" based on the dimensions of a loonie and quarter. I use these coins for shopping carts cause I never have a real coin on me. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2…
This is the Canadian hero remix, caution removing supports on rear around hockey sticks.
As a special request to Criag. This was all I could find buddy. Hope its what your after : ) Good luck Cheers Jace
Just a fun little print. 1 filament swap and that's it! Made Using the actual specs and font used when making Canadian highway signs
Design Requirements A coin holder that fits in the Gridfinity slot in my drawer FreeCAD Parameters Nickel =21.2mm Dime =18.03mm Quarter =23.88mm Loonie =26.5mm Toonie =28mm Tolerance =.51mm Should be easy-enough to update the FreeCAD file…
This model is designed to print well with PETG. in my tests I found PETG to work better for this than PLA since cookies stick to it the least and it's a bit more flexible. I printed it with 0.6mm nozzle and 0.2-0.3mm layer height. There…
