8 modeli
To use an ADXL345 (possibly similar), and a Raspberry Pi Pico as an input shaper for Klipper systems as a secondary MCU. Programming settings, and wiring were pulled from NERO 3D and the following video:…
This was specially design to hold Belden's CAT6+ keystone . But will very likely work with other similar style keystone connectors. Nozzle = 0.4mm Layer = 0.3mm Perimeter = 3 Infill = Gyroid 15% Support = can be done without, but if…
After lots of versions, I think I have made a nice cable dresser. Designed for Cat 5, may need to be slightly scaled up for Cat 6 and beyond. Directions (if you really need them) Print two at a high infill for strength. Put them together…
This is a small modular cable clip / cable comb designed for Cat5e UTP cables with an outer diameter of around 5 mm . The cables snap into the clip nicely and are held securely, making it useful for keeping network cables, low-voltage…
For pushing bare Cat5e cable through a wall. This friction fits in my Cat5e riser cable, but I also included 2 holes for 3mm grub screws in case you need some extra tension on the cable. Also included a .step file for your mods. I printed…
Something I could not find so I drew it. Dynamix Cat5e coupler with panel housing. Category: Electronics
Holder for cat5e ethernet cable. Two versions: with screw holes - 2mm with countersink, attachment for 6x31mm oval holes in 1.5 sheet metal Tested with Sunlu PETG filament on Bambu Lab A1 mini
Cambium PTP radios require special outdoor Cat5e cable. To fit the radios, this needs to be stripped and have RJ45 connectors fitted. This ruler is designed to: Allow the cable to be marked in the places where the different layers of…
