Liczymy pasujące modele…
I tried out this great design from Ernie34 at https://www.thingiverse.com/thing:2656493 and found that I didn't have quite enough room for my electronics in the other side of the enclosure (The Kulp K8-B is fairly tall). This design had…
I use 4 M3x8mm bolts for the Falcan Smart Receiver and 5 #6 1/2 screws for the CG1500. The mount can be placed either left, right or centrally at the bottom of the CG1500, you could install 2 of them in the left and right positions if you…
This is a simple mount for a Advatek Lighting PixLite MK2 board for a CableGuard CG1500. To connect the PCB to the mounting plate you will need 4 machine screws and nuts. The holes on the mounting plate are 3.5mm in diameter, slightly…
FPP PB16 mounts for the CG1500. Use #6 ½" sheet metal screws. Attach the brackets with 1/2" screws to the CG1500. Two Screws at the bottom and 1 or 2 at the top. Then attach the BBB16v2 with 3 or 4 1/2" screws.
Sandevice E682 mounts for the CG1500. Print 2 and use #6 1/2" and #6 3/4" sheet metal screws. Use the 3/4" screws for the top holes and screw through the Controller and mount, into the case standoffs. Use 1/2" screws for all the other…
I use 4 M3x8mm bolts for the Falcan Smart Receiver and 5 #6 1/2 screws for the CG1500. The mount can be placed either left, right or centrally at the bottom of the CG1500, you could install 2 of them in the left and right positions if you…
Meanwell mount for CG1500 Door. Print two per case. Use M4 machine screws to attach the mount to the power supply and #6 1/2" sheet metal screws to attach the mount to the CG1500. Category: Electronics
FPP PB16 mounts for the CG1500. Print 2 and use #6 1/2" and #6 3/4" sheet metal screws. Use the 3/4" screws for the top holes and screw through the Controller and mount, into the case standoffs. Use 1/2" screws for all the other holes.…
Dump Falcon Receiver CG1500 Mount. Use #6 1/2" and #6 3/4" sheet metal screws. Category: DIY
This is a mount for 2 powersupplies inside a CG1500 enclosure. Can be printed on a Prusa Mini. Also working and will upload a cover bracket so you can mount electronics above the supplies as well. Suggest printing in PETG for stability…
I build many outdoor enclosures for Christmas LED light shows that use a Raspberry Pi to run the show. This is a simple little mount allowing the use of any of the mounting points inside of a standard CG1500 box to mount the Raspberry Pi.…
This is a mounting plate for the Kulp Lights K8-B with hole spacing in the plate, designed to mount into a CableGuard CG1500 enclosure. There are 4 variations of the file depending on what you need: Internal_Holes: Mounting holes are…
