Liczymy pasujące modele…
This is my Rocinante model which is supposed to represent the Rocinante ship as it featured in the very last episode of the season 6 of the show Expanse. It has CSL plating, railgun, PDCs and torpedo tubes. The model is 50cm long and has…
Brainrot ballerina cappuccina
The Gömböc is a fascinating mathematical object with a unique geometric property: it has only one stable equilibrium point and one unstable equilibrium point. This means that when placed on a flat surface, it will always return to its…
This is a remix of the wonderful Convention badge holder by Jurgizmo that I definitely recommend you check out! - https://www.thingiverse.com/thing:491108 I took the design and made some adjustments to the geometry and finish to allow for…
Found this cool logo on the internet. Quickly redraw it in vector and made a 3d printable version in Fusion360. Enjoy! Personal use only! Not for sale. Print instructions Do a simple color change when base color finished.
Updated: 2020-03-07 Re-Uploaded in a better format with gcode. This is a second version of the Rocinante model from the TV show "The Expanse". It has better gun-wells, better landing thrusters, and a much taller stand. Print instructions…
Red bits Purple/Blue bits (carbon silicate laced armor) Black bits Light Gray bits (Silk) Dark Gray bits Slices better with PrusaSlicer 2.4.0 (rather than 2.4.1 or 2.4.2-rc2) Simply load up each .3mf file as a project into [at least]…
This is a 3d model of the Rocinante aka the MCRN Tachi from the SyFy and Amazon Prime show The Expanse. Print instructions I started with this excellent 3d render by Anton Perfilev…
Inspired by the SpaceX-Coaster ( https://www.prusaprinters.org/prints/88-spacex-landing-pad ) I made a coaster with the pinup girl logo on the Rocinante spaceship from the series The Expanse. As the logo is not my property please note the…
I pulled this from Thingiverse as the original creator had not ported it over. However, the cover photo is my print of the plaque.
A popular Brain rot Ideal For you think so Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/image
Original is here: https://www.printables.com/model/136343-rocinante-from-the-expanse
UPDATE April 7 2023: 1) Re-uploaded both PDC versions as manifold stls. The ones posted before this date were not manifold (originally uploaded the wrong ones). 2) Uploaded a pre-supported Roci with PDC V2. It test printed fine at the…
Rocinante from expanse with solar powered engine light Need a transparent PLA or PETG I used PLA from PM Grafitte Black . I have used solar panel and electronics from this (course with modified Blue led)…
I modified the PDC frame and doors to use a ball and socket mount, which is simpler and more robust than the original version with the tiny pins.
This is a more accurate and printable rendition of a Martian PDC from The Expanse. The PDC rotates on the turret and the turret itself can articulate on the mount. I made this model from the ground up to work with Martin's Rocinante (…
So I was painting the coils on the #Rocinante & I was thinking, man this should be filament there!! Hop to #Blender , do some mods and hit print! It so worked for the first time! :) Looks much better! If you plan to use FDM then each…
Model of the Rocinante with MCRN logos. Added plenty of extra details to the relatively low quality model provided by SyFy. Print with 0.4mm nozzle and 0.2mm layer height or better. The guns were made by Gaz23, who seems to have deleted…
I replaced the glue-in tabs with simple friction fit locking tabs which seem to work fine, prints ok in both PLA and SLA.
Bandeja de esponja de cocina hecha para que escurra el agua. Print Settings Printer: Biqu B1 Rafts: No Supports: No Filament: GST PLA Notes: Puede imprimirse en forma vertical sobre el borde plano trasero. Category: Kitchen & Dining
Consiglio di utilizzare PetG, ma li ho testati anche in PLA e funzionano benissimo Non è necessario nessun supporto.
Rear segment of the Rocinante from Martin (part xxx_-_roci3) without the legs interfaces. The model is available for MK3S and for MMU (3 parts to insert together on prusa slicer)
Follow me so you don't miss my next models from The Expanse Please respect the orientation of the objects (see picture of the plate and/or the 3MF file containing the plate. And don't forget to “place on face” all STL because they are not…
This is yet another 5th Element inspired Covid vaccination card holder remix. You will need glue to assemble this. I recommend superglue/CA. I made 3 changes to the original: 1 - I made the indent to hold the filament bar deeper to secure…
Una maqueta de una cocina
I few days ago I realised that my kitchen has all cabinet legs broken (I have no idea how it is possible these have gone broken considering this should not be a consumable). Unfortunately I can stay with my fridge balanced precariously,…
This is a Case for vaccination certificates in europe. This is print in place. Tip: put a Logo or a Label on the case with PrusaSlicer using modifiers ;-) Edit: I added another version to fit the older certificates, as requested in a…
UPDATE: added v3 for a bit bigger contact area (recommended) Just wanted a no text edition and an octogonal shape. :) Add reasonable infill for strenght.
Use pieces of PLA for the hinges on the torpedo tube doors.
Bring your kitchen creations to life with this collection of 7 detailed 3D models in STL format! From classic cookware like a pot with lid, frying pan with egg, and a moka-style coffee maker, to essential appliances such as a blender,…
Es igual al original con los dias en español
Meet Ballerina Cappuccina – the hottest Italian Brainrot trend of 2025! This iconic 3D model features an adorable ballet dancer with a cappuccino cup for a head, which took TikTok by storm with over 50 million views. Designed by…
I am learning with the Hueforge software, so I decided to share some of my work with u guys. You can find all informations about printing in the text document under. Don't forget about changing all the setting in your slicer. Enjoy :)…
Un soporte para el papel de cocina tamaño grande. Diseñado para pegar en baldosa con pegamento, silicona, etc...
Modified some panels, added torpedo tubes, added hatches and new stand to Martin's model.
Vee block with clamp, clamping Knob M8 Threaded Stud - Prisma Officina con Morsetto e Manopola di serraggio M8 This Precision V-Block Clamp Set is designed for checking precision machine parts, general workshop use, and holding stock when…
Tapon para desague, en el slicer se puede canviar el diametro para que coincida con el deseado. Se recomienda imprimir en Flex, tpu, etc
Modified some panels and added torpedo tubes and hatch to Martin's model. Added a stencil to help paint the ship name.
Universal Clip / Hook for Kitchen Clog - Hook Clip for Plastic Clog Feet and Aluminium Clog - Clip for kitchen base - Plinth Clip for kitchen legs - Gancio per zoccolino cucina - Molletta tamponamento cucina Resize/Scale to adjust…
Manzana 🍎 Español: Una manzana alegre y segura para imprimir en 3D, perfecta para cocinas de juguete y juegos de rol culinarios. Ayuda a los niños a aprender sobre frutas mientras juegan y desarrollan su creatividad. English: A cheerful,…
Porta Rollos de PAPEL para Cocinas baños y Lugares de Trabajo
Filtro de fregadero de cocina de plástico, colador, red de filtrado de alcantarillado, tapón de desagüe de piso, colecto fácil de imprimir ideal para los restos de filamento rápido de imprimir boquilla 0.4
Diseño para una regla de oficina con una longitud medible de 17 centímetros. Se puede fabricar en un único color, hacer un cambio de filamento manual o emplear un sistema multifilamento (AMS, MMU, etc) para decorarla con los colores que…
🌟 ¡Organiza tus utensilios de cocina con estilo y funcionalidad! 🌟 Introduzco mi nuevo "Porta Cubiertos de Cocina", el accesorio imprescindible para tu hogar. Diseñado con elegancia y practicidad en mente, este organizador es perfecto…
Impreso con relleno giroide al 15%, 3 paredes y 4 superiores e inferiores. Impreso en PLA sin soportes Printed with 15% gyroid infill, 3 walls and 4 top and bottom. Printed in PLA without supports
Remixed from Martin's model to remove carbon lace and replaced it with the standard plate armor.
Soporte para colocar la bola de jabón y la esponja de cocina. Consta con una base con ranuras para que el agua fluya y u
"I have always been hidden in your shadow..." Bring the horrifying, clawed centerpiece of the nightmare animatronics to life with this high-fidelity, static-pose figurine. This model is a frame-accurate tribute to the towering,…
A remix of Martin's Rocinante rear section. Included are rear sections with and without landing gear mounts.
Se puede imprirmir en pla o petg hay dos opciones, se le puede colocar un balero 608z o se puede sustituir por un acople que se puede imprimir en 3d, la única desventaja ES QUE ya no podrá girar con tanta facilidad el organizador de…
es un barco de piscina y si lo pones a imprimir a 270 le quedara un acabado con pelos pero si le dejas los de las ventanas parecerá que tiene ventanas de cristal
I've had the idea for these bookends flying around my head for the last two years, and finally got around to building them. My part of this model is a basic bookend with the Ring Gate from The Expanse. I then used the Rocinante model from…
impresion basica. con soportes en el arco y capas de 0.2
Porta rollo para tener el rollo de papel de cocina con estilo, solo imprimir y pegar.
Osłonka na obcinaczki do filamentu , które są naprawdę bardzo ostre. Jeżeli ktoś by chciał plik w formacie .FCStd stworzony we FreeCad to zapraszam tutaj na moją stronę :…
Miniatura de cocina real, creada desde cero, con medidas sobre la cocina real. Fabrica de cocinas en Zaragoza , Graher. tiene tods los muebles , interiores, baldas, y cajoneras, puertas , etc, tambien encimera, lavavajillas, frigo,…
Practico colgador para rollos de cocina, admite los rollos mas grandes, es para colgar debajo de estanterias y asi aprovechar el espacio. lleva un eje realizado tambien de plastico añadido tapas opcionales con el eje desplazado , para…
trulimero trulicina generated with AI brainrot from: https://en.namu.wiki/w/Italian%20Brainrot/등장%20캐릭터#s-2.30 Image used for generate 3d model added in picture gallery Background of image removed with: Adobe lightroom / You can also use…
I remixed this awesome design by @Dustin to enable MMU3 printing on the same layer. Printed on a textured print sheet to help hide any layer lines. If printed on a PEI smooth sheet, you can touch it up with a heat gun to get rid of any…
Es la piscina por donde salia Mazinger Z en la serie
para cocina poner botes de especias para colocar en pared o en puerta
Diseñé este gancho porque los originales se caían a menudo al coger los utensilios. los de este diseño quedan bloqueados contra la pared y no se caen.
A simple hook to hold the towels on the bathroom or kitchen cabinets. Designed for a door/drawer thickness of 20 mm. The thickness is 1 mm on the back side to allow correct closing, and progressively increases to 2 mm on the top, to…
Adaptador para el tubo del limpiador de fondos de la piscina, para conectarlo al colector de la pared de la piscina. El diámetro de la espiga que se conecta al colector es cónico y va desde 39,5 mm a 41 mm. Category: Outdoor & Garden
At least a fourth generation remix of an awesome multipass model. My remix comes from the remix by Scotland who adapted it to fit the CDC vaccination cards. I didn't have a steady enough hand to paint them well, so I separated the…
Spare part clip lock Philips Cucina Sandwich maker HD2430 replacement.
this is a slightly lower and louder remix of another uploaded last month
Organizador de escritorio para lápices, bolígrafos, clips, pos-it y soporte móvil. Todo en uno.
Recreacion de llavero estilo dominicano, kitipo
la principal diferencia es el espesor y acorté uno de los lados para que no se note tanto en la puerta
Facilissimo da stampare. io ho utilizzato la mia mini + usato un pla bianco marca: cyber filament. 3 strati sotto 3 perimetri altezza stampa 0.20 mm. Per qualsiasi altra informazione scrivetemi pure. Buona stampa a tutti !!!
Removing the kitchen skirting board broke two hooks. I tried to look for them here, but I didn't find them as I needed them quickly and so with a quarter of an hour of drawing and 40 minutes of printing I solved it. NO SUPPORT IS…
Single part that would replace the PDC Frame/Cover/Doors. Doesn't open, so there is no actual PDC inside
Organizer for Kitchen Utensils - Easy to print, one wall, in spiral contour mode
The part roci-2b needs to be mirrored.
pisapapeles y porta papeles para oficina y estudio / paperweight and paper holder for office and study de 100x100mm _ 4mm para le hogar o oficina o sala de estudio
clip para zocalo de cocina, para railes de aprox 28 mm, y patas de diametro 30/32 Algo mas fino que los inyectados, pero con unos nervios para permitir mejor su apertura. mas distancia para encarar a la pata. apoyar la base de nervios en…
tungtungtung sahur + balerina cappuccino
Cubertero para cocina, Modelo entero , no es posible imprimirlo de una pieza. Se dan 2 modelos partidos por uno de los lados para cama de 300 , se nota menos que partirlo por la zona alta. Añadido nuevos modelos con mayor espesor. Print…
Cut a peace (110mm X 85mm) of paper protector and put over the card before install the frame. The frame will keep it in place. Enjoy the print
designt to repair my Kitchen cutter, If you found this useful, please donate what you think it is worth to my paypal.me. Help cover the time of design. Thanks, Enjoy! Category: Household
A small base for kitchen towels Use the minimun filament posible, strong to the work and small to try to use the minimun space Printed on kingroom kp3s 200°C base temperature 60° PLA filament
This 3D model captures the essence of the viral brainrot icon known as the Cappuccino Ballerina—a bizarre yet endearing figure that blends surreal humor with graceful aesthetics. The character features the body of a classical ballerina…
PORTA SPEZIE DA CUCINA 6 POSTI Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2
Soporte para las ruedas de limpiafondos de piscina Print Settings Printer: Artillery Genius Rafts: Doesn't Matter Supports: No Resolution: 0.28 Infill: 15 Filament: Smartfil PLA White Notes: 7 wall lines and 15% infill Category: Outdoor &…
Hola, les dejo un diseño que hice para mi cocina, es muy sencillode imprimir. Saludos!
Es una impresión de 11h pero vale la pena, queda muy solido y es muy practico, gracias al diseño de panel de abeja se puede ver el interior sin sacar el cajón
Necesitaba un bol de esas dimensiones mas o menos i decidí construirlo yo mismo con PETG
Escurridor para cubiertos con puesto para 3 cuchillos y 4 espacios para cucharas y demás
practicas piezas para organizar las tapas de las sartenes, 2 modelos , uno de ellos sencillo con 3 huecosyponer pegado con cinta doble cara en el fondo. Segundo modelo para pegar lateralmente, admite 3 tapas de 26,24,22 cm , aunque puede…
appendi strofinaccio per mobile cucina mondoconvenienza
Have not printed text is close till i can find exact then will update size 100 mm x 120 mm x 3.8 mm UPDATE: Redid text to more closely match original object. and resized to 90 mm x 120 mm x 3.8 mm Category: 3D Printing
Gimbal Stand is designed to be able to rotate the ship in various positions for display. no glue required. there are a few parts that its recommended that you use 100% infill. The pla will bend too much otherwise or outright snap. I…
Colgador para cocina para tablas de picar y otros
Funda de seguridad para cuchillo de cocina de 20cm de largo. Impreso en PETG, pero puede servir PLA Altura de Capa variable, 2 bucles de perímetro, relleno de rejilla en 3% Es necesario borde de adherencia para evitar que se nos caiga ya…
Ballerina cappuccina cake topper / dortový zápich
Tapon para aspirador hecho en casa para piscina
