Liczymy pasujące modele…
I found serious security fault on vans and campervans, which can be found on all type series built from 2006 and on. In the past several years I had been employed as a chauffeur and a garage administrator in the caravan rental company,…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replacement Knob for the shift of Peugeot Ranch/partner and Citroen Berlingo cars, fit quite snug, I used PLA, but consider heat resistant plastic in case the car gets very hot on the sun... I managed to fit in the original knob swatch…
Wydruk około 3,68 €–4,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This sunscreen / sunvisor fits the frame of my kenwood DMX8021DAB Radio in my Citroen Jumper and helps to keep the sun off my screen. Please feel free to adapt and modify for your needs. I printed it with PETG and a 0.4 nozzle at 0.2…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Printed it on a Geeetech I3 with 0.6mm nozzle to cut the printing time. The original model used a hard plastic (PLA/PETG). Tried it with Esun Grey TPU and it turned out acceptable. Used supports but they were tough to remove. Printed the…
The People's Poet, Cast in Simplicity. This is not a car. This is the gentle rebellion of French ingenuity, cast in corrugated charm. The Citroën 2CV immortalizes the whimsical, indestructible spirit of freedom made accessible to all.…
Blueprint généré à partir d'une image SVG.
Drawings to make a Peugeot 305 rear spring compressor tool as featured in this video: This is not for 3D printing, it is something to make from steel. I have included all the PDF drawings for all parts that make up this tool, as well as…
Citroen C3 parcel shelf clip. Needs also couple of small 120 mm zip ties. (1 x 2,5 mm)
It is a custom knob for citroen and pegueot from 2004 to 1996 valid for almost any model that year. The measure of the rod is 10.4mm, it can be valid for other brands but I have not investigated it. In the lower part it has four holes to…
Citroen C2 Screen Holder for CarPlay and Android Auto Custom-designed screen holder for the Citroen C2, perfect for mounting a display compatible with CarPlay and Android Auto. Its optimized design ensures a secure installation on the…
These are prone to snapping, causing the glove box to fall open. You will need to remove the glove box surround (Simple procedure can be found on Youtube), and stick the pin in the original location. I'd recommend using a high infill…
Replacement gearknob for Citroen Jumpy, Fiat Scudo, Peugeout Expert. Made with M12 thread, to use with car you have to thread the gear lever to M12 The model is made to be fitted with the original R,1,2,3,4,5 emblem Its cut in 2 so the…
Ich vbrauchte für unseren Opel Rocks E einen Innenspiegel. Diesen habe ich bei Amazon gefunden. Der originale Halter des Spiegels sagte mir nicht so zu, da man ihn hätte Schrauben oder Kleben müssen. Also einen neuen konstruiert. Infill:…
Leider ist der Link zum Original-Teil gebrochen. Ich habe ein paar kleine Änderungen vorgenommen, die den Druck erleichtern und den Materialbedarf reduzieren. Ebenso wurde die Fuge zum Bauraum harmonisiert. Die Platte für die Handyablage…
Capture the avant-garde spirit of the Citroen DS with this expertly sliced 3D printable model. Renowned for its revolutionary design and technology, this model brings the "Goddess" to your collection, complete with a base for display. All…
Capture the avant-garde spirit of the Citroen DS with this expertly sliced 3D printable model. Renowned for its revolutionary design and technology, this model brings the "Goddess" to your collection, complete with a base for display. All…
Simply clutch alignment for Citroen DS / ID post 1965 manual transmission. It is for "3 fingers" pressure plate (see first photo), not for diaphragm one! It's only a tube...no particulary attentions for printing setting Print Settings…
My replacement for the hard-to-find rear lamp holder. Suitable for Peugeot 107 and Citroen C1 models from 2005-2014. I reinforced the base of the holder by thickening it by 1 mm and removing the empty space in the lamp holder, which was…
My replacement for the hard-to-find rear lamp holder. Suitable for Peugeot 107 and Citroen C1 models from 2005-2014. I reinforced the base of the holder by thickening it by 1 mm and removing the empty space in the lamp holder, which was…
Popis auta Citroen CX GTI 22 (25) TURBOPopis auta Citroen CX GTI 22 (25) TURBO
Rear Door Handle Fiat Scudo / Citroen Jumpy / Peugeot Expert OEM 9408720738 - Maniglia Interna portellone posteriore Two Versions: Standard / Lite MANIGLIA INTERNA SERRATURA PORTA PORTIERA DESTRA PARETE POSTERIORE FIAT SCUDO FIAT…
Version 1:Citroen c4 Picasso without any logo Version 2: Citroen c4 Picasso with "Citroën" logo Version 3: Citroen c4 Picasso with "Picasso" logo
Uchwyt pasuje do kubków na napoje do 0.5 litra oraz z puszkami 0.33 i 0,5 litra
Made these little turnbuckle clips for Peugeot Boxer / Citroen Relay vans that hold down the access cover for the coolant reservoir 12 walls, 0 infill, painted on Fuzzy skin for grip area I used PLA for the red one (black one is original)…
Citroen Berlingo push in cup holder to suit 300ml and 500ml cans etc, also fits partner van
This Coinholder fits into the console of a Citroen Jumper and holds 3 different cointypes ( up to 2 € ) and rolled banknotes and 2 shoppingcartcoins
Bumper plug. Peugeot Boxer, Citroen Jumper, Fiat Ducato
The People's Poet, Cast in Simplicity. This is not a car. This is the gentle rebellion of French ingenuity, cast in corrugated charm. The Citroën 2CV immortalizes the whimsical, indestructible spirit of freedom made accessible to all.…
The Urban Quirk, Cast in Simplicity. This is not a car. This is the playful reimagining of mobility, cast in cheerful asymmetry. The Citroën Ami immortalizes the bold, unapologetic spirit of accessible freedom for the modern age. Every…
Výplň 100%, vrstva 0,08 Začni s černou Vrstva #13 (1.12mm) přehoď na šedou #14 (1.52mm) přehoď na zlatou #17 (2.56mm) dokonči bílou
This is a model of cover for Cirtoen C4 B7 2010-2014 headlight with 72mm hole (smaller one)
Slot for mounting a second USB port on the Peugeot 3008, Citroen C5, and other PSA models with the same button layout. It replaces the card holder on the dashboard to the left of the steering wheel. A switch panel in the same format is…
The custom-made cup holder is designed to be quick and easy to install in a grid
Seat Belt Buckle Dacia Duster, Volkswagen Touran, Citroen C4 Picasso (II. Gen) and others Note: Not intended for use while driving with a passenger. -If you decide to use this adapter for tying small animals, it should be more suitable…
Accessory for Cup Holder for Citroen: https://www.thingiverse.com/thing:984289 This part is for a Redbull can designed
It is a custom knob for citroen and pegueot from 2004 to 1996 valid for almost any model that year. The measure of the rod is 10.4mm, it can be valid for other brands but I have not investigated it. In the lower part it has four holes to…
Citroen Tow truck 1952 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 210 Filament material: PLA
Adapters for fitting new speakers into your Citroen C4 II (B7). The front door speakers are only needed for pre-facelift models where the original speakers use 3 screws instead of 4 and are meant to be used with 165mm speakers. You also…
Key holder to be screwed in a furniture or wall and hold the key of your Fiat Ducato, Peugeot Boxer, Citroen Jumper ... and others. This has been designed for a campervan so we can screw it to a furniture and we have a place where we…
Phone holder Citroen C1 | Toyota Aygo | Peugeot 107, you need to pull the radio forward slightly and hook the holder in. Inspired by https://www.thingiverse.com/thing:6162986, which was adapted in https://www.thingiverse.com/thing:4914499…
Remix from https://www.thingiverse.com/thing:4914499 , I needed it to be wider as i wanted it more centred and there's a clip in the way. First time it broke for me (2nd image), making it wider and more infill made it better. For Citroen…
One of my first projects might be useful to someone.
Permet de placer la batterie, (un peu plus haute) à 90° par rapport à la position d'origine. @Les 2 cosses + et - se trouvent face à l'avant de la voiture et tendent moins les câbles électriques. @Avec support pour le régulateur de…
Impression en PETG de préférence avec 100% infill.
Ich vbrauchte für unseren Opel Rocks E einen Innenspiegel. Diesen habe ich bei Amazon gefunden. Der originale Halter des Spiegels sagte mir nicht so zu, da man ihn hätte Schrauben oder Kleben müssen. Also einen neuen konstruiert. Infill:…
In this model we have the top 5 car brands sold in portugal. This design is just wall art althought it can be used for other purposes. Download your car logo and stun everyone with your 3D print! More car brands will come in the next…
Fake cover for citroen c3 multimedia in order to hide the device Category: Automotive
Citroen 2CV Rally Ondersteunt: Ja Resolutie: Dynamisch Invulling: 50% lijn Filament merk: 195 -200 Filament materiaal: PLA
A small clip to replace the broken original one that holds the sun screen up for a passenger window. Easy model, easy print, easy fix. I printed it with PETG and it has proven itself in mid-european summer. If your place / car tends to…
j'ai créer ce pommeau de vitesse car celui d'origine de mon Citroën Berlingo du a son Age commencé a partir en miette j'ai repris les côtes avec mon pied a coulisse et j'ai tous reproduit a l'identique afin de le fixer sil suffit de…
A jig used to hold a Peugeot or Citroen flip key in place so the roll pin can be removed to change a key blade Used in this video:
Edit of this model by bkbilly, basically made the base bigger and with a space in the bottom for the charging cable. For the mount part you can download it from the original models page. Printed in PETG, 20% gyroid infill
Pièce permettant de clipser le support de hayon pour les citroen c3 première génération. Imprimé en PLA -basic avec le profil “strength” par défaut. Part allowing the clipping of the tailgate support for first-generation Citroën C3…
Replica for original part. I used 100% fill. Print from: ABS Support: Yes
Elegant Citroën logo keychain Ignite your passion for Citroën with this unique 3D keychain! This model is more than just a key accessory; it's a statement piece.
The original caps got lost during tyre change, so I've made a replacement. This is 60mm version of the caps. The exact size is 59.8mm to allow for tiny clearance. I've printed it using PETG which is flexible enough to click in without…
I have already lost the 3rd ring for the Citroen Grand Picasso C4 wheel cover. The last ring served as a sample for the model.
This is a threaded cap for the wiper washer fluid tank of a citroen C4, it consists of two pieces. The first piece fits by preasure and the second one screws to the first one acting as a cap. I'm not sure if it can fit other citroen…
2 bacs (part 1 et part2) pour rangement entre les 2 sièges avant d'un Citroen Berlingo II (2010). Les bacs sont amovibles et s'emboitent dans les cases d'origine : Les bacs sont à imprimer en PETG ou autre matière résistante à la chaleur…
For windshield wipers with attached spray nozzles. Tested on a Citroen Aircross C5, should fit other models. This is a replacement clip that attaches the water line to the wiper frame. Printing in ASA recommended. Works OK with PETG.
A dash clamp for Citroën DS3 with a holder for a magsafe charger. Mounts between the vents and the LCD display. Parts press-fit together, and the magsafe holder snugly holds a magsafe charger. There's a hole on the back of the magsafe…
Color Cips used in the Citroen C3 2024+ Can be used in the front bumper or rear doors. Should be printed like on the 3mf file... by side with supports... like on the Preview_04 or Preview_05 files ATTENTION: Not compatible with C3 Aircross!
Adaptér zadního stěrače na auto Citroen C3 1. Funguje tak jak má
Citroen DS year 1954 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195-215 Filament material: PLA
Citroen C3 Picasso Magnetklappe Gepäckraumboden / Rücksitzlehne. Für die beiden Klappen, welche magnetisch an der Rücksitzlehne Richtung Kofferaum angeklappt sind. Diese werden heruntergeklappt, wenn man die Rücksitze zur Vergrößerung des…
New version of the switch panel for Peugeot 3008, Citroën C5, DS7, and other PSA (Opel) vehicles, to have a HomeLink-style solution like other automotive brands. This new version utilizes Cherry MX switches for a more premium feedback; I…
I couldn't find the model anywhere, so I made my own, I use it to turn on the subuffer
Das Logo auf der Abdeckkappe wurde ausgetauscht, ansonsten wurde nichts verändert.
Precisa un agujero con broca de 6.5mm. Un pasador diámetro 6.2mm y longitud 30mm (los venden por Aliexpress). Queda más alto que el original, pero a mi me gusta más. Es un remix de un modelo estandar de pomo para 5 marchas y reversa.…
i wanted to use a “professional” smartphone Holder, bute the placing in our Peugeot Partner wasnt good So this is an adapter for the use of Smartphone holders that are normally fitted to those venting grills It should fit to Citroen…
Endstück/ Kappe für die Sitzhebel der Stellantis V Busse. Nut 16x2.5mm
Abdeckung für die Ausschnitte der Doppelsitzbank im Boden. Hilfreich beim Tausch von Sitzbank zu Einzelsitz.
Leider ist der Link zum Original-Teil gebrochen. Ich habe ein paar kleine Änderungen vorgenommen, die den Druck erleichtern und den Materialbedarf reduzieren. Ebenso wurde die Fuge zum Bauraum harmonisiert. Die Platte für die Handyablage…
Fixing the key blade when not kept in the opened position. Removable.
The original backshelf clip is kind of flimthy and I broke it by accident. I designed this printable version as replacement. The two halfs should be screwed together with M3 bolts and if you have use a washer. The parts should be printed…
the pin on my fuel door is missing, broke off. Hopefully I own a 3D printer so I designed and printed a replacement. There it is for you to use it. Now my fuel door is flush again. I printed in PETG so it will resist to heat better. I…
Citreon DS model with working wheels. Needs glue. The wheels have front covers to glue on.
Are you looking for the perfect cup holder desing for your car? Do you own one of the following car models? - Fiat Ducato - Citroen Jumper - Peugeot Boxer (models from 2007 to the present day)? You've come to the right place! Our cup…
I have a citroen berlingo from 2018. This car doesn't really have a decent cupholder so I've printed one. It fit's perfectly for a can of 330ml. TIP: Print it in PETG or other plastic that is more heat resistant. I've printed this with…
A new 3D figurine generated by AI, a Citroen Mehari. Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
