Liczymy pasujące modele…
You'll want to print with supports in the hole for the hourglass I believe, it might be possible without, but I printed with them. I made this remix because sadly my codenames cards got waterlogged and bendy from having beer spilled on…
Wydruk około 5,69 €–6,96 € nettoWstępna wycena jednego wariantu
Design notes I used two magnets—8 mm (D) × 3 mm (H)—to keep the lid secure, so that the precise fit of the lid is not as important. I printed a lid with only 0.1 mm clearance—which is too tight to fit as-printed—because I preferred to…
Wydruk około 3,83 €–4,68 € nettoWstępna wycena jednego wariantu
The game just ships with a bunch of ziplock bags that are too small, and is a pain to set up and put away. This just makes the game so easy to set up, play, and put away. I designed it to use as little filament as possible, as it is a…
Wydruk około 10,85 €–13,26 € nettoWstępna wycena jednego wariantu
I split the model in two halfes to be able to print it on my mini. for alignment of the two halfes 3mm dowels (or M3 screws) are used. the gcode is for 0.6mm nozzle
Wydruk około 3,62 €–4,43 € nettoWstępna wycena jednego wariantu
Has the card holder from your Codenames or Codenames Duet game gone missing or broken? Print a new one! Designed using FreeCAD Link Stage 3 branch. I found that printing it with a small layer height so that card holder tangs are not too…
Codenames is a great game, but the default storage solution is to keep all of the cards in separate zip-lock bags. This organizer keeps all of the game components organized in as small of a footprint as possible, which also increases the…
The indent allows for easy and selective flipping of the cards with one hand and organizes the cards neatly into a grid. The card tray can be disassembled into 4 parts so it fits into the box. Works with all game versions except the…
Prints without supports in one piece on Mk2/3 sized print beds. 10% infill is fine. Added a 2-part versions for smaller printbeds like the Mini, complements of user Darque Flux .
Remix of Codenames Board Game Inserts (Including Deep Undercover, Duet and Pictures) brettmcgin is a steely-eyed missle man, but I wanted to reduce the print time and material used so i cut out some sections and also thickened the walls…
Remix of Kabong's original design. I made some compartments a little deeper, chamfered edges, and made the lid fit more snugly. If you like this design, go give him a follow!
There are quite a few organizers for Codenames and Codenames Duet around. I printed a couple of them just to find that they can't hold the thick agent cards in my edition of the game. Plus, I have the MeepleSource meeples that replace the…
Here are 2 boxes I designed for board games "Codesnames" and "Codenames Images" (french version of Codenames Pictures, but I guess the content is the same). Both boxes fit in one single game box, but you can also take only one with you.…
I made this box organizer insert for the game Codenames because every time I open it up all the components are a complete disaster. Codenames is a tabletop game by Vlaad Chvatil that is published by Czech Games Edition. Here's a link:…
Box to store codenames pictures in, 3x types of cards and the plastic card holder. This is for the rectangular maps.
Whenever I get a new board game, the first thing I do (after playing it first!) is find/create an insert to improve storage. Originally, I downloaded and printed this very well designed model:…
Set of inserts that hold all the components from Codenames and Codenames: Duet, and fits in a single box.
The design that I butchered is awesome. But I needed to fit sleeves... Those freaking sleeves that destroy oem insert usefulness and render well designed thingiverse inserts as "almost" what I need. I modified this in tinkercad and really…
Diese Box, basierend auf der Rugged Box (Parametric) , ist für das Spiel Codenames XXL . Das komplette Spiel samt Sanduhr passen hinein. So ist eine stabilere Aufbewahrung und Transport des Spiels möglich. ---- The box (based on the…
Overview This is an insert for the Codenames Pictures game box. The key cards, agent cards, and picture cards each have their own homes. The box has a nice weight distribution, and the weight does not shift when you tip the box. The…
Okay listen carefully… “Singles” got it? Next one is “Self-reliant" wait is that two words? But it's hyphenated does that count? Okay, redo, “Autonomous” How did you not get that?? Ummmm, “Unsupported”? Dang, I should have just said that.…
The ultimate Codenames box insert. Ultimate protection for your possessions. Print settings: 5% infill Bottom layers: 2
Card tray for Codenames and/or Codenames Duet with multiple vertical levels sized specifically for the word cards and agent cards to provide a “perfect fit”. If you're the type of person who fidgets with the cards until they're perfectly…
This is a model to store the game Codenames in 2 boxes of the widely used photo caddy storage. There is a bit of tight fit with all components in the Agents and Keys box, but it should be ok. The little support for the key is not…
Tested on Prusa Mini using 5% infill 0.15 Layer Height 0.2 First Layer Height Print all parts separately and glue the letters in the spaces. Please note - this box has been made to be big enough to store all the word cards from the…
Codenames is a word game wherein two teams of players compete against each other, trying to outsmart the other. In this game, players must be sharp to create and interpret clues about the codenames of agents on the field represented in…
I created this box organizer for Codenames Undercover in Fusion 360. inspired from https://www.thingiverse.com/thing:2981166 Print instructions Weight: 330g with 10% Infill Time: 10:30h with 0.6 Nozzle and Layer height 0.3
Overview: This two part insert for Codenames allows you to fit three games (Classic, Duet, Undercover) in a single box. You will need to decide which bystander and agent cards you want to use as this organizer (and the box in general)…
This is a box insert for the Codenames Pictures board game, so that all of the pieces can stay organized in the box for storage. Remixed from @brettmcgin's set of Codenames box inserts with just a couple minor modifications. While…
Remix of moga's organiser meant for the new thicker card stock and no sleeves. The hourglass and key card holder has been shortened so it doesn't lift the lid. Also makes the unnecessary part a key holder. Category: Toy & Game Accessories
A card tray for Codenames and/or Codenames Duet . Combine the trays to create a grid that keeps the cards in place during play. Versions The "minimal" one, uses less filament, but I think the other version looks better. Other Versions…
I made a custom codenames box that makes management of the existing cards a little bit easier. If I was to do it again, I might make the lid lift off instead of sitting on a hinge; it tends to come down while the box is open. I've…
I wanted to be able to fit the base game and the expansion, Deep Undercover, into a single box. I liked this design as it doesn't require printing a lid, instead, it uses the cardboard box lid to secure the cards. The expansion cards are…
A simple insert to organize the pieces of CodeNames Pictures inside the box. Since the size of the box can vary slightly, I designed it to be slightly oversized. Just sand down the corners if it does not fit properly The image is from an…
Tested on Prusa Mini using 5% infill 0.15 Layer Height 0.2 First Layer Height Print all parts separately and glue the letters in the spaces.
Codenames games come with all the parts in plastic bags which does not look very nice and is not comfortable. So I made some inlays for the original boxes to sort the cards and all the rest. On the side of each is a small hole for…
An alternative to mcdanlj's design, holder for the map card. (Mine has a less abrasive tolerance). My cards measure 0.3mm in thickness, so the tolerance was chosen accordingly: each “bump” is extruded 0.885mm from the edge the total gap…
Changed the card tray to fit together with 20x5x2mm magnets. I used these https://www.amazon.com/dp/B0CPJ9LWFN Re-arranged the box organizer to accomodate all 4 pieces of the card tray. The word cards do fit just perfectly, although they…
This is a complete grid and inlay set for Codenames Disney/Marvel. It consists of a modular grid that can be re-arranged and used for both play-modes (4x4 or 5x5), and inlays for all cards and covers. The inlay for the covers and…
Set of three trays to keep codenames parts in order. Print 1 of each.
A couple of storage organizers for the boardgame Codenames. It uses the box as the lid for the cards, with the exception of one set that uses the hourglass as a cap, which clips into place. Base-game only. Printed without supports.
This is a simple storage box for the word cards found with the games Codenames or Codenames Duet. A divider is included so that one can keep separate cards played from cards yet to be used. Print Settings Printer Brand: Creality Printer:…
Convenient box for Codenames game. All contents accessible at the same time. Key card holder integrated in the lid - for usage, close the box with the lid flipped over. Slot for the rules is A7 in size. Print the rules yourself on single…
A card tray for Codenames Pictures . Combine the trays to create a grid that keeps the cards in place during play. Other Versions There is also a version for laser cutting . Tinker You can also Tinker with the designs . Support My Work…
This compact travel case for Codename fits the entire base game without the sand timer. You will need pretty well tuned printer since the tolerances are pretty tight. All parts are designed to be printed without supports. You will need to…
Codenames card holder Created a new bottom plate and made the holder under a corner now to make it easier to read the card. Print Settings Printer: cleality ender V3 KE Rafts: No Supports: No Resolution: 150 Infill: 15 Filament: Creality…
Tested on Prusa Mini using 5% infill 0.15 Layer Height 0.2 First Layer Height Print all parts separately and glue the letters in the spaces. Please note - this box does not have space to store a sandtimer Please note - this box does not…
Organize your cards from Codenames and Codenames Pictures with these organizers. Don't feel like taking the whole box, print the lid to bring just the organizer. Print Instructions: No supports necessary No additional hardware required.…
A version of the rugged Box for codenames XXL. For assembly, it needs 6 M3x20 screws.
CodeName and CodeName Duo Box For each need to print Base + Top + Lid Take less much space than the box it came in Remake to have Box same size and same logic inside + Lid with and without space for rules
I wanted to have all the cards and stuff of this great card game well organized in the box (the standard box comes with transparent bags). So i designed this two part cards organizer. Print Settings Printer Brand: Anycubic Printer:…
A compact box for the game "Codenames Deep undercover 2.0". I didn't like the storage solution for the game, way too much box for the amount of cards, so I designed a new box! The standholder is printed with as low infill as possible to…
A codenames box that holds everything, including the sand timer. The lid holds via four magnets (6x2). If the Box isn't transported often, the magnets are not needed. It's designed for a press fit. There is a Fusion file with parameters…
Decided to combine my three copies of Codenames into one box. Holds all the components from each version allowing you to easily pull out the one you want to play. Print 3 of the inserts.
A practical board designed to neatly arrange Codenames cards on your table and make gameplay smoother. Key features : - Easy card removal - press one side of a card and the opposite side lifts up. - Modular design with four pieces that…
A remixed cover / lid of this great box organizer by @Kabong for the game Codenames. The box cover features the name of the game in English as well as in Hebrew, and also has a spy icon on it.
This is a quick organizer for the Codenames Marvel game. I don't like cardboard inserts or plastic baggies, so this allows you to replace all of that and you can store the box any way you'd like without worrying about components getting…
Here is a box for Codenames. Hope it helps! Happy printing :)
See other components for the insert in the original model: https://www.printables.com/model/332062-boxes-for-codenames-and-codenames-images This is a remix of the Codenames Images insert, because my version have slightly bigger code cards…
All of Codenames games is greatfull. And all of them have a disproportionately large storages for cards. I made a simple one for fast printing in vase mode. My settings (printed on direct drive) : Vase mode 0.3 mm first layer 0.2 mm other…
Simple tray for storing/organizing Codenames cards. Inner dimensions are 74mm x 165mm x 28mm.
I've stored everything in 22x22x8cm wooden box. Category: Games
I recently received this game as a Christmas gift. However, the only storage provided consists of a few plastic bags. These are not only awkward and time-consuming to use, but they also make very inefficient use of space, as the box is…
Every time we played codenames we had sort out the cards. They were all mixed up in the box. I have created a tray to store all cards and the hourglass and card holder neatly. There are cutouts for each pocket to get them out easily.…
Print Settings 0.3mm layer height 10% infill (Grid) 3 bottom layers 4 top layers
My take on the many codenames boxes out there, nice and compact to fit in a bag, and no messing around with plastic bags. Designed to use as little filament as possible while remaining sturdy, with a snap on lid rather than a full cover.…
Insert for Codenames / Codenames Duett with square key cards
Your book shelf or game shelf looking a little messy? Clean it up with one of my Games Books! This Games Book is designed to fit the classic game CODENAMES. Beyond organization, it also improves the overall look of your game shelf, making…
A remix of edankleef's Codenames Card Tray, but with magnets instead of dovetails. Works with 10x5x2 magnets.
If you are a fan of the game Codenames but the card spreading across the table triggers your OCD... There are two files, print two each. They fit in the original box and fit together like a jigsaw puzzle. The card cells have a stepped…
I needed something to store my codenames cards so I made this
Insert/organizer for board game CODENAMES: Critical Role Adventures This was modeled quickly since my friends were visiting me and they own the game and I wanted to help them to organize better this game, since it was quite awkward to…
A practical board designed to neatly arrange Codenames cards on your table and make gameplay smoother. Key features : - Easy card removal - press one side of a card and the opposite side lifts up. - Modular design with four pieces that…
Tested on Prusa Mini using 5% infill 0.15 Layer Height 0.2 First Layer Height Print all parts separately and glue the letters in the spaces. Please note - this box does not have space to store a sandtimer Please note - this box does not…
Box to store codenames pictures in, 3x types of cards and the plastic card holder. This is for the rectangular maps.
