Liczymy pasujące modele…
Please note the Screenshot: This is a remix made from Printable Blueprints Collection by Basement Creations https://www.printables.com/model/459633-printable-blueprints-collection
Print in place Twin Concorde Flightcase Replacement – 3D Printable Model This 3D-printable replacement for the "Twin Concorde Flightcase" is designed to securely store and protect two Ortofon Concorde-style DJ cartridges. The case…
Mithilfe dieses 3D-Drucks lässt sich das Lego Concorde Modell in einem 45-Grad-Winkel an der Wand befestigen. Der 3D-Druck nutzt dafür die von Lego vorgesehene Aussparung, in welche auch der Lego Ständer passt. Die Befestigung erfolgt mit…
BAC Concorde wall art silhouette model. Adjustable size. I accept model suggestions.
I recommend printing in PLA or PETG, 0.2 layer and 20% infill and 4 wall loops should do the job.
Wallart of legendary Concorde. Single piece verison, scaled to fit Mk3 printer. Also included is original scale file.
A flat wall mount for the Lego Concorde set (10318). The pin is angled so the Concorde won't slide of the mount. Fixed using countersunk 3,5x20mm screws.
This is a 1:1 scale of a British Aircraft Corporation Concorde Super Sonic Jet. You might want to scale it down substantially before printing unless you have a printer big enough.
I am a big fan of CLERX's Concorde model and have made a few. I really wanted one "on the ground" with snoot lowered. These are the stl files for the wheels and suspension. Front suspension is now a better scale. Main undercarriage…
Lego Concorde 10318 wall mount I only put 2 screws in main support no fixation needed for le head support
Print your own 1:492 scale model of the legendary Concorde, the world’s first supersonic passenger jet. Capable of cruising at Mach 2.04, the Concorde could fly from New York to London in under 3.5 hours, cutting typical flight times in…
Print in place Twin Concorde Flightcase Replacement – 3D Printable Model This 3D-printable replacement for the "Twin Concorde Flightcase" is designed to securely store and protect two Ortofon Concorde-style DJ cartridges. The case…
I assembled LEGO 10318 Concorde without realizing the default height clips into the ceiling. This simple model angles it down to be shorter. The default orientation has it vertical requiring supports for strength with the front and back…
The Concorde was a supersonic passenger airplane developed by Britain and France. It first flew in 1969 and began commercial service in 1976. Known for its sleek design and incredible speed, the Concorde could fly at over twice the speed…
A stand for my Concorde and Tu-144 models. The stand reassambles the planes as they are on display at the Technikmuseum Sinsheim in Germany.
Mithilfe dieses 3D-Drucks lässt sich das Lego Concorde Modell in einem 45-Grad-Winkel an der Wand befestigen. Der 3D-Druck nutzt dafür die von Lego vorgesehene Aussparung, in welche auch der Lego Ständer passt. Die Befestigung erfolgt mit…
BAC Concorde wall art silhouette model. Adjustable size. I accept model suggestions.
If you want to print the model, I have attached it(use supports and lay it where engines touch baseplate) Use glue to bond the Concorde and the engines The wing has a surface to glue the engines to the wing, and use the vertical…
I have found that there are sold Ortofon Concorde Fingergrip 2 versions and i made them for printing. Just orient the detail for minimum support and print it.
The Concorrde airplane model with stand. Length 42cm, span 17,5cm (after size reduction 85%). Print instructions Infill of airplaine parts 5%, stand 100% for weight balance. Layer height 0.1mm. Supports recommended.
Remixed wall mount to have the plane nose towards the right Lego set 10318 4 perimeters 30% infill Gyroid patern used wood screws of 4mm used
I wasn't satisfied with the Lego stand needed something smaller to put it on shelf Has been holding it for 2+ years great.
hiya, this is my attempt at mdoeling the concorde. this does not require any assembly. I just made it to practice my aircraft modeling skills and to shake off my rust, same as my old post. and its main use is to be used as decor
The amazing Concorde, but as a wall art!! Made to remember the legendery supersonic aircraft that changed transportation. Please comment for improvement!
This is a flight case to hold two Ortofon Concorde MK2 style phono cartridges.
As with all my other airplanes, I wanted my Concorde to have landing gear, not a stand, so I designed something simple to attach to the bottom of my model. Assembly The nose gear should be longer than it needs to be, so you will have to…
The Concorde was a supersonic airliner that was produced by British Aircraft Corporation and Aerospatiale. It was introduced in 1976 and was used for 25 years by British Airways and Air France, until July 25, 2000, when a Concorde ran…
For more information on how to build this project check out my website! https://www.bitsanddroids.com/diy-concorde-servo-panel/ Used in this project: Arduino Mega, provided by DFRobot go check them out over at:…
Inspired in the new Ortofon Concorde MK2 model. Use the model with guide if you can, depends on if the broken finger lift has left a hole.
Model description Concorde was the first commercial supersonic passenger airplane, built jointly by aircraft manufacturers in Great Britain and France. From 1976 to 2003, it halved the time it took to cross the Atlantic Ocean by flying at…
Just designed yet another Xmas tree with a special look. Can be hanged or glued to some support. Can be customized by you as F3D files are included.
Instead of using paper decals, I used plastic decals. The concorde model was done by CLERX. Please refer to https://www.printables.com/fr/model/341875-concorde-1144 for more details.
Orient this model diagonally so it will fit on an Ender 3 sized printer. This also causes the top layer lines to run lengthwise with the model. After printing remove the small tabs at the pointy ends. It wants to warp a little so wait…
After building the LEGO Concorde, I had nowhere to put it. At just over a meter long, it needed to go on the wall. So, I designed this mount to both get it off of the table, and to display it at a dynamic angle where you are able to…
A simple wall mount for the Lego Concorde Simply hang the mount with 4 standard wood screws and enjoy the beautiful Concorde Print settings: 5 perimeters 40-50% infill ABS+ Filament
A wall mount for the lego concorde. This will present the concorde with the following angles. Rotated 45 degress on the Roll axis. Rotated 15 degress on the Pitch axis. Rotated -10 degrees on the Yaw axis.
I recommend printing in PLA or PETG, 0.2 layer and 20% infill and 4 wall loops should do the job.
Ortofon Concorde MK2 fingerlift Print settings: Printed with PETG 0.10mm DETAIL No Brim/No support
A drink coaster that looks like a flower but with a hidden aviation theme! Who knew that a collection of Concorde's would make such a floral design. Files include a regular option with layered color changes and an MMU version, along with…
The Concorde, a supersonic aircraft developed by the British Aircraft Corporation and French Aérospatiale, first took flight in 1969 and entered commercial service in 1976. Capable of reaching speeds over 2.2 Mach, it halved the typical…
Wallart of legendary Concorde. Single piece verison, scaled to fit Mk3 printer. Also included is original scale file.
Large version of my Concorde wallart. Precut to fit Mk3 sized printers, can be scaled up or down acording to your printer size. Included is original size 3mf file.
This is a Wallmount for the LEGO Concorde. Screw holes are 4.5mm diameter. Nothing else needed to mount. Around 15% infill is enough.
A plaque with a few stats about the Aerospatiale-BAC Concorde, a legendary plane that flew from 1969 to 2003.
Inspired by the 1950's 3 flying ducks, wall art, I've created this simple silhouette of Concorde, for a slightly more modern take. The .stl is a single silhouette, the .3mf is 3, a small, med and large, as in the photo, all at 2mm…
