Liczymy pasujące modele…
It can be simply printed without support. Ventilation holes help drying. Only 2 neodym magnets needed (2x3x7mm) to hold both sides together. Recommended 100% infill and layer height 0.15mm. Use Prusament PET-G, because it is the best…
The toothbrushes were still lying around the bathroom, so I decided to do something about it. You can stick it with double sided tape or glue to the cabinet or loose on any surface, or in the shower. The model does not require any…
This is a complete set of inproved interdental toothbrush handles compatible with Curaprox brush bits. The set consist of: basic Torus handle, with a lid Angle handle for reaching back teeth, with a lid a Deck for organizing brushes, with…
Print-in-Place case for three Curaprox interdental brushes.
This is simple and practical case for Curaprox toothbrushes. It keeps your toothbrush protected and clean. The minimalist design may also fit other similarly sized toothbrushes. Perfect for travel or everyday use! The outside dimensions…
Ergonoic wall mounted holder for 3 Curaprox interdental toothbrushes. Mount using doublesided tape Brushes are easy to remove from holder by pushing on the top part of the brush.
Case for CURAPROX interdental toothbrushes with space for spare brush heads and toothpick floss.
Interdental brush holder compatible with TePe Angle Curaprox UHS 475 Another brushes not tested - just try, write comment. And i will add to “compatibility list” Can be hung on a shelf. Clearance 4 mm to be parallel to the wall
The toothbrush holds firmly, while it's still easy to take it out and put it back in. Use double-sided adhesive tape to fix the stand to any flat surface.
No more toothbrushes creeping all over your bathroom cupboard. Keep 'em all at hand, hanging neatly at this hanger. Attach to any flat surface w/ double sided adhesive tape.
Držák na nástavce mezizubního kartáčku CURAPROX a zubní nitě FIREFLY. CURAPROX interdental brush holder.
curaprox and tepe toothbrush stand 1x tepe 2x curaprox 2x tepe 1x curaprox 1x tepe 1x curaprox 1x curaprox ("hockey stick") I used 15% fill.
Choose your size, alternatively rescale to suit your needs lightweight & fast to print tiny lip to keep edge smooth Printing instructions: layer height ideally 0.2mm to keep the edges as smooth as possible Version history: v1.0 06.10.2023…
Curaprox interdental brushes holder
Remixed great model from kauelima for bigger area for double sided tape
Holder for your Curaprox CPS, can hold 4 cps and 1 Flosspic.
Dual Toothbrush stand / holder for Phillips Sonicare + Curaprox interdental brushes (from the set - one square, one round) Also has a slot for Elmex gel (or small toothpaste 10-25ml) OR you can download a model without the slot.…
Eine Halterung für CuraProx 1006 Zahnbürste Infill 20-30% Layer 0.16 - 0.2mm
krabička na cestovní balení zubní higiena curaprox
“100% My Original" Curaprox Travel Case for two (2) Interdental brushes. It can be simply printed without support. Both sides are connected with hinge on one side and magnets on the second. Ventilation holes helps drying. Only 2 neodym…
Am besten mit PLA oder PETG drucken.
The remix of the curaprox toothbrush stand with 3 curaprox holes and "vent" gap in the base.
CURAPROX interdental brush organizer for 10 packs of brushes. The size of the hole is 43mm (width) x 9mm (depth) x 30mm (height).
This is designed to print without supports up to a maximum layer height of 0.2mm. I printed on PETG with a 0.4mm nozzle. Note that the model has a notch marker to indicate the front side. This is important when connecting the adapter with…
I've been using the stand from Gustavo, and it's been working out well, so I'd recommend it! But it did take up a lot of space. I've decided to make it just for one brush, and I hope you enjoy it as much as I do! Happy printing! 😊
This is a simple holder for Curaprox interdental brushes that I attached inside a cabinet. You may also liked some of these projects: https://wivry.gumroad.com…
Is 5 brush stand from Gustavo too big for you and Jirka Machacek's stand for one brush too little? Whether you live with a partner, or you are single and have two brush sizes, this Duo stand is made for you! Proven design with improved…
Am besten mit PLA oder PETG drucken.
The remix of the curaprox toothbrush stand with 3 curaprox holes and "vent" gap in the base.
CURAPROX interdental brush organizer for 10 packs of brushes. The size of the hole is 43mm (width) x 9mm (depth) x 30mm (height).
Eine Halterung für CuraProx 5460 UltraSoft Zahnbürste Infill 20-30% Layer 0.16 - 0.2mm
This adapter accommodates two regular Curaprox brushes, two singles (CS 1006/1009), and four interdental brushes (UHS 470 holder). Print with the sample cup or adapt to your size of toothbrush cup (the one in the photo is a generic IKEA…
Curaprox interdental brush holder with drip tray
Curaprox interdental brush holder with drip tray
A tiny magnetic Curaprox holder with space for neodymium magnets on the bottom and back, so you can snap it onto any metal surface in the bathroom. I attached mine to the side of the washing machine (see photo), but the boiler casing also…
Dual holder for Curaprox toothbrushes. This holder is designed to be used into a 13mm screw in my mirror (step file included to modify for your own size). I recommend you to slice it using extra wall count for a better structure on the…
Toothbrush stand in pyramid shape for Curaprox toothbrushes. Designed to no infill . There are two variants: A) With hole through which is better for cleaning and works well on a flat sink. Drops of water make sufficient adhesion. B) With…
Curaprox Toothbrush Travel Case by @peko remixed to have a latch instead of 2 magnets since they are quite hard to find. 2 Variants: Single latch & Double latch (for warped beds) Print in petg with 3 walls :)
Summary I created this brush holder because I don't like a ton of added stuff. I offer two versions with a cover with an opening just for brushes or even for toothpaste. Print Settings Printer brand: Flsun Printer: Flsun QQ-S Rafts: No…
This is designed to print without supports up to a maximum layer height of 0.2mm. I printed on PETG with a 0.4mm nozzle. Note that the model has a notch marker to indicate the front side. This is important when connecting the adapter with…
Features Small and matches the toothbrush shape. Non-powered, not charging. A bathroom stand for the toothbrush and brush head.
