Liczymy pasujące modele…
This is a remix as mentioned in the summary. I made this for a friends birthday and modified it to fit a standard 32x8 LED Matrix from Amazon. The modified files are the ear cups (threaded and hollowed to house electronics) and the front…
A diorama created as a collab by the designers Wekster , Dsk001 and The3Dprinting . Thanks guys! You can either print them in multiple pieces (no MMU needed) to have a multi-color model or you can use the single color version to print…
Daft Punk Thomas Silver Helmet! Update Oct 2024: Recreated this version 2.0 from scratch. There were a few features that were bugging me with V1, so I created a new and improved model including mounts for LEDs All parts rotated to print…
Wearable helmet of the golden Daft Punk Guy.
Nozzle 0.4 Layer Height 0.2mm (Recommended) No supports needed Scale it as you like :)
Lucky 13 Daft Punk Silver head If you like it --> press like it :-) Daft Punk head as a remix for the funny lucky 13 figure. The original model is shared from the founder of Prusa Josef Průša . You can find the diorama which is created as…
This is a remix of https://www.printables.com/model/1447972-daft-punk-helmet-thomas-20-wearable see original thing for instructions and additional parts Compatible with parts from…
Lucky 13 Daft Punk Gold head If you like it --> press like it :-) Daft Punk head as a remix for the funny lucky 13 figure. The original model is shared from the founder of Prusa Josef Průša . You can find the diorama which is created as a…
remix of the model coupling the two helmets to form the cover of this wonderful album. It may be necessary to apply a mirror effect to the model. It has been printed with MMU and I doubt that it can be done in parts, if someone does it,…
full guide on: https://learn.adafruit.com/3d-printed-daft-punk-helmet-with-bluetooth Build a Daft Punk Thomas Helmet with bluetooth control! In this project we'll build the iconic Daft Punk Helmet with the ability to change animations and…
Compatible with parts from Daft Punk Helmet Thomas 2.0 - Wearable for Small Printers
A solid prop of the Daft Punk Human After All era. Not sure of making it hollow but ask in interested
When the Insterstella series of videos from Daft Punk came out i got instantly enloved with the music and the story behind them. I always wanted to have the small projection shown on the "Something about us" song and now that we can print…
License plate stamped from Starboy, The Weeknd's song with Daft Punk. Placa de matrícula estampada de Starboy, la canción de The Weeknd con Daft Punk.
A fun little model i remixed and made for the 45 record adapter contest! make sure to like this post!
Spiral Mode/Vase Mode You can print it with: Nozzle: 0.4/0.6/0.8mm (Can print 0.8mm line width with 0.4/0.6 mm nozzle tho) Layer Height : 0.2mm/0.4mm (Recommended) Bottom Layers: 4 Scale it as you like :)
Simple Model of the pendant from Daft Punk Thomas Bangaltar
Gift box for Daft Punk`s helmets: Guy-Manuel's Daft Punk Helmet by andyways - Thingiverse Thomas Bangalter's Daft Punk Helmet by andyways - Thingiverse
Guy Manuel helmet for Dummy 13's
A beautiful recreation of the license plate seen in Daft Punk's Electrorama. This 3D printed model is a faithful reproduction of the iconic license plate featured in Daft Punk's short film Electrorama. Designed with attention to detail,…
Casco Daft Punk Guy-Manuel
Album cover art for daft punks random access memories Please DM me if you would like the hfp files for hueforge to edit Project: RANDOM ACCESS MEMORIES HueForge.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of…
These are designed to use 6mm x 2mm disc magnets. They should be able to be press fit without the need for glue. However, if it is too tight I would recommend using a 15/64 or 1/4 in drill bit to widen out the holes a little bit. Here is…
The DAFT (Dual Anchor Front-Top) Mount heat sinks allow you to firmly anchor your favourite hot ends to both the front and top of of your print head. The DAFT Mount system was designed to allow very stable and rigid mounting of hot ends…
This model is designed to be printed with a few filament swaps. The model should be printed with a layer height of 0.2mm. You start by printing in red up to layer 4, at 0.8mm. Then, you swap the filament to white and print up to layer 11,…
Remix of Josef Prusa's Daft Punk Dudes with keychain loops and coloring to match the Get Lucky Music Video suits + MMU3 Standard organic supports and wipe tower. Wipe tower comes out heavy so I'd recommend reducing the wipe if you are…
These are designed to use 6mm x 2mm disc magnets. They should be able to be press fit without the need for glue. However, if it is too tight I would recommend using a 15/64 or 1/4 in drill bit to widen out the holes a little bit. Here is…
Un casco inspirado en daft punk de uso como colguije o esfera ppara pino
Microlight 3.2 This is the DAFT mount version of the Microlight. Only the top-front plate is different from the standard Microlight Very light and EXTREMELY rigid print head for a V-Core 3 printer. The top plate and front plate are now…
This model is designed to be printed with a few filament swaps. The model should be printed with a layer height of 0.2mm. You start by printing in red up to layer 4, at 0.8mm. Then, you swap the filament to white and print up to layer 11,…
Comprar el mecanismo para el reloj, el modelo esta echo para estas medidas.…
ready to be printed no support needed you will find 2 version,one version with hole and version without hole
HI! This is an simple adapter that allows us to connect two models made by "Nada" named: Thomas 2.0 - Ear - Inner Right (Left) with Thomas 2.0 - Ear - Cap totally putting asside all parts related to LED installation. Here is the link to…
Album cover art for daft punks random access memories Please DM me if you would like the hfp files for hueforge to edit Project: RANDOM ACCESS MEMORIES HueForge.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of…
Daft Punk TB3 and GM08 helmet to be printed in one piece Each Below are the printing parameters. Thanks for stopping by :) No comercial use. Personal use ONLY Link to Patreon :) patreon.com/Artoys3dPrint Casco de TB3 y GM08 de Daft Punk a…
CAD files included if you want to change the models to match your puck lights. The puck lights I used were 68 mm in diameter and 25 mm in height.
I made this to go on a phone case so the model is quite small, but simply scale to your needs. This model is ideally used with a multi-material printer, but every colour is a separate solid in the CAD file so I have included individual…
Create your own Daft Punk helmet with this highly detailed 3D model, designed for easy printing and assembly. Perfect for cosplay, decoration, or collectors, this STL file is optimized for 3D printing. Model Features: Ready for 3D…
Here is a bobble head using Guy-Manuel's and Thomas's helmets as a replacement head to the original open source action figure (Medium). Embossed Daft Punk logo into the back of the torso (difficult to see in pictures). Haven't printed…
As per IMALIVENOWcosplay request. I have sliced this up to reduce the need for support and to use minimal filament, This model was originaly created by Dung0beetle in a pepakura format, Cheers Jace Please note : This is an untested print…
Mashup fun! Play with your favorite band! 0 Points of articulation! Literally took me 2 minutes! Exclamation points are fun! Now with less exorcist action! Category: Other
This design is derivative on an internet meme. Or rather a thingiverse meme. It challenges the idea of creation for the sake of others and instead is a creation for the sake of self-amusement BWAHAHAHAHAHAHAHAHAHA Uses the gangsta, the…
A round keychain with a diameter of 4 cm. Printed in white creality pla+, with enabled ironing and 0.3 mm width.
I created this little keychain in Tinkercad. printer: Ender 3s1 Nozzle: 0.4 layerheight: 0.16 first layer speed: 10mm/s There are two folders, one contains the keychain with a black ring around it and the other without the ring. I used…
![Daftpunk Helmet [Thomas Bangalter]](https://media.printables.com/media/prints/7156/images/50835_a09826a7-6b83-4f26-af9f-b181e4214238/hero_ex_6_7156.jpg)
