Liczymy pasujące modele…
The Mandalorian Darksaber model designed by Polymath314 is gorgeous and I wanted to print it with the right color filaments to avoid painting anything so I split it up. The biggest challenge was splitting up the vertical stripes to still…
NOTE: chceck out the original at: Darkstar Kit Card by Crea_Hicks - MakerWorld An easy to print and fast to assemble darkstar Kit Card.
This is STILL A WORK IN PROGRESS. This is a remix of the amazing model created by Polymath314 on Thingiverse. I've also linked the 2 collapsing darksaber models that inspired me. Altho This is NOT technically a remix of either of those…
This is the way Print instructions Find out how to build your own Darksaber using 3D printed parts and electronics from Adafruit! This features motion-activated lights and sounds using the PropMaker Wing. It also uses BLE to wirelessly…
These are quick modeling practices without much consideration for printability. 3mf file should include the recommended print orientation for the aircraft, positioned such horizontal stabilizers and aircraft nose can be printed together…
This is a collapsing darksaber I designed based on the darksaber from the star war universe! It prints in 5 pieces, with the 3 blade pieces designed to be printed in vase mode. To assemble simply place the blade pieces in one after…
The bonfire from the Darksouls game series. Print instructions printed at the default size it doesn't really need supports till you get to the hilt, its gets a bit wobbly up that way. I am unsure about support needed at smaller sizes.
Should be easy enough to slice how you want it, however there is a 3 part version included
I created these Star Wars Minis to hold a piece of 1.75mm filament. Heat & cool filament to make straight sticks. Collection HERE: https://www.printables.com/@TripleGWorkshop/collections/2171907 Tree Supports on build plate only Partially…
Summary Deaths Mask from the video game Darksiders. Its a 3D scan of the Mask from the Collectors Edition. I've not printed it by myself yet, but i think the splitted parts should be able to be printed without support. Instructions For a…
On an FDM printer this one should be able to be printed without supports :)
THESE FILES ARE PROVIDED FOR FREE ON A NON-COMMERCIAL LICENSE - PLEASE DO NOT SELL PRINTS OR COPIES OF THESE FILES @Magnavis_ on Instagram & Twitter If you would like to show some support for my files, you can do so here:…
The Darksaber! As seen and inspired by its appearance in The Mandalorian. I have previously made the Rebels appearance of this legendary lightsaber, but I have yet to tackle its live-action counterpart. When I approached the Rebels…
This is an Add-On Blade attachment to go hand in hand with the original split by color Darksaber design by UnimatrixRed. This file is modeled to go in place of the “Emitter Tip” from UnimatrixRed's original design so that you can have a…
The DarkStar A supersonic stealth fighter with extraordinary high-speed flight capabilities that set it apart from other aircraft. Its staggering speed can be used as a powerful weapon itself, allowing the aircraft to not only break into…
This model might not be completely movie accurate, as there is little reference material available. I have scaled up the model to 1:75 scale.
Death is not only the leader of the Four Horsemen of the Apocalypse but also the most powerful and oldest of the Nephilim. This high quality 1:1 scale museum replica of Death's mask. The mask leaves no detail unnoticed, featuring every…
I tweaked the Fusion 360 file from Adafruit and the Ruiz Brothers so that the entire project will fit on a Prusa i3 MK3 WITHOUT having to glue anything that wasn't glued in the original . This required shortening the handle, rotating the…
If you want my models early, please consider supporting me on patreon - patreon.com/onuheino
Tarre Vizsla's Darksaber! An ancient and unique lightsaber and symbol of power for the Mandalorians. Much like Kylo Ren's Lightsaber, I designed this hilt with more of the overall form in mind rather than how it would be broken apart to…
Diseño del modelo Felicia, de Darkstalkers, es capturada en un diseño dinámico, mostrando su postura clásica con un toque moderno y estilizado. Sus detalles, como el cabello fluido y las expresiones faciales, resaltan sus características…
Here's my version of the Darksaber as seen throughout the Star Wars universe. To get it size accurate you should scale all the parts by 150%. I'll have build and painting instruction sometime soon. Be sure to post a make and check out my…
To protect your darkslide. Print the two files, glue them together with Loctite Super Glue. It's a snug fit and the holder won't fall off. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: Doesn't Matter Supports: No Resolution:…
Bonfire Sword from DarkSouls by pooria1998 . Originally uploaded to Blend Swap .
Custom-fit protective case for the GEPRC Darkstar 22 micro cinewhoop. Designed to store and transport your quad with antennas still attached and a battery mounted—no more bending antennas or removing your battery every time you pack up.…
Full Scale, Full Detail Darksaber from the Star Wars Franchise. This is the post-Clone Wars model featured in Rebels, Ma
As I don't plan to use different cones on the camera and didn't want to risk any lightleaks I removed the slot for the darkslide in the lid and added a new arrow. Thank you Velvia for letting me remix your file!
Another cool mask fronm the Darksiders II game, Cheers Jace
This is a Lego Darksaber from the mandalorian Category: Other
I figured after the first few models I did remixes to I need an original design. So to stick with the theme of Mandalorian I though we have to have the darksaber. So my first model ended up being just that. So please keep in mind this is…
Modified version of cBoLsmUiEc Darksaber on Makerworld to be used with Prusa Slicer. import the 3mf as project into Prusa Slicer so the handle and blade will print with the connector / hole as an alternative you can also use the provided…
This is a darkslide holder that adheres to the back of an A12 film holder with adhesive (glue, tape, velcro, etc.). Since it is designed to fit over the existing film box end tab holder I included a new one on the back of the holder. In…
A model of the Lockheed Martin RQ-3 DarkStar that can be launched with a rubber-band launch or thrown Flight preparation: Bend wings upward (5 degrees is best I've found) (Dihedral) Bend real tabs UP (points nose up) Hold it just between…
I modified the Darkstar model by X+N to be a Gear Up / In-Flight model. The Gear Bay Doors are seamlessly integrated into the model, with thin panel lines modeled in so the doors are still visible. I also cleaned up some mesh errors…
I was not happy with how the guard came out when printed in 2 separate parts, plus the pins did not fit and it did not join together that clean, there was some gaps. So I combined them to a single piece. I printed it flat at first, but…
Experience the raw power of the dark side with this stunning 3D printable figurine that transforms your favorite Togruta warrior into a mesmerizing collectible STL model. This expertly crafted statue captures every intricate detail in a…
Embrace the power of the dark side with this stunning 3D printable STL figurine that brings forbidden allure to your collection! This meticulously detailed statue captures every curve and contour in breathtaking precision, making it the…
Seals of the Apocalypse from the video game Darksiders. If you feel like the Apocalypse is incoming, you should definitely print these seals to delay the inevitable. I used my resin printer to print them, but I had success with FDM, too.…
My brother wanted a Darksider logo coaster so I took ''Darksiders Logo Template'' by Brylock on thingiverse and put in a couple of layers to make it more suited to make a coaster. Sturdy and can do dual color quite well. Some deburring is…
Printed with default supports on X1C in PETG. It's not a hard model to make, but it takes a few iterations to get the tolerances right. You will have to cut the existing mounts, but you'd need to anyway if you want to mount anything other…
this glider only flies if you throw it really hard and at an 40 deegre angle ,then it flies very fast but short . i built it based on the sr-72 darkstar. it is an low poly model bc why not. goodnight.
## Koncept designu Tento 3D tištěný model představuje stylizovanou lebku připomínající prvky ze světa Darksiders. Jeho propracovaný design zachycuje tajemství a moci, ideální pro vystavení nebo cosplay. ## Účel Ideální pro nadšence do…
Print in PLA or PETG. 15% is fine, you will need a little bit of supports for the hole for the screw.
The revision to the Darkstar I hastily made
Can print with 2 color printer or glue together. Print one way then mirror it in slicer and print that to get both sides of blade. Category: Toys & Games
A blank filters for darks, I used it in the past to take darks with my filter wheel and my color camera, Works if printed in black filament or put gaffers tape over it to make it dark!
Dvě kosy Darksiders vytvořené pomocí AI.Zvětšení ve sliceru na Vámi požadovanou velikost.
print vertically at your desired resolution, can be installed flat or on an angle
Sorry I don't have a picture of the print :/
Any feedback would be greatly appreciated . Perfect for miniature projects, modeling, dioramas, etc. Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
a mix of benchy and an SR-72
Hello! These are replacement bumpers/feet for the battery pad of the Geprc Darkstar22. I noticed one of mine went missing after a few flights, and so checked to see if Geprc released the STLs for the printed parts of the drone.. They…
This is an airplane from the Microsoft flight simulator game! It's called the Dark Star! Please leave comments!
General Description To make this sword model, I used reference art from a game called “Hexaria“. The model is about the size of a DnD miniature to begin with, so I would suggest scaling the sword to fit your 3D printer. Default size ^…
Philips One Blade DarkSaber Carry Case + Handle This is a short, stubby remix designed to fit the Philips OneBlade handle inside the saber. I hollowed out the interior and added a lid that acts as a protective cap, allowing the blade to…
Just wire in another speaker so you can hear from both sides of the hilt. Speakers fit snug or can be glued in place. Print with support. Category: Toy & Game Accessories
Detailed 3D printable Witch Version Of Morrigan From Darkstalkers figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…
A unique lamp inspired by Darksiders Be captivated by a fully original creation inspired by Strife and his iconic guns. This lamp is designed in an entirely new style, reflecting my personal vision while avoiding any infringement on the…
Darksoft Sega ST-V Dark Knight Multi OLED Selector Cart Slot Mount for Lions3 acrylic case (by Clint Kolodziej) This is a case for the Darksoft Sega ST-V Dark Knight multi's OLED selector, designed to attach to the cartridge cutout on the…
family guy Somethin Something Something Darkside
USE PRINT PROFILE PROVIDED Full Image Catalog The complete gallery of my works can be found at www.marjers.com You can search by the file’s reference number or simply click the preview image to open it directly. Print setup - Infill: 100%…
Darksoft Sega ST-V Dark Knight Multi LCD Selector Cart Slot Mount for Lions3 acrylic case (by Clint Kolodziej) This is a case for the Darksoft Sega ST-V Dark Knight multi's LCD selector, designed to attach to the cartridge cutout on the…
Holds and protects the dark slide holder during shoot to prevent damage, it also includes a film reminder slot as I cant never remember what film i loaded in the magazine after some days. It also features a cut out for film loading on the…
Prototype Mamiya 645 Super darkslide. Based on the original metal module's measurements. This project is currently a draft, I need to experiment with ways to print it and also to determine if it would actually be light-tight in common…
This is a Display Stand for my Darksaber . You can find the Darksaber here: https://makerworld.com/en/models/3208904-darksaber-mandalorian-no-ams#profileId-3632079 You can use the Stand only for the Hilt or print the extra smaller Stand…
A request from two followers: Sadly I could not create a way for it to roll up (hinges would be too thick), so I made this rolled up version. It's kind of heavy, weighing 50 grams and taking 3 hours to print all pieces, but is oddly…
Custom-fit protective case for the GEPRC Darkstar 22 micro cinewhoop. Designed to store and transport your quad with antennas still attached and a battery mounted—no more bending antennas or removing your battery every time you pack up.…
Custom GPS mount for the GEPRC DarkStar 22 micro cinewhoop. Designed to fit an 18x18mm GPS with compass (like the Flywoo GOKU GM10 Mini V3) into the stock 15x15mm mounting area. The tolerances are tight, but it works—giving you GPS Rescue…
Dvě kosy Darksiders vytvořené pomocí AI.Zvětšení ve sliceru na Vámi požadovanou velikost.
Hello! These are replacement bumpers/feet for the battery pad of the Geprc Darkstar22. I noticed one of mine went missing after a few flights, and so checked to see if Geprc released the STLs for the printed parts of the drone.. They…
Darksoft Sega ST-V Dark Knight Multi OLED Selector Cart Slot Mount for Lions3 acrylic case (by Clint Kolodziej) This is a case for the Darksoft Sega ST-V Dark Knight multi's OLED selector, designed to attach to the cartridge cutout on the…
Darksoft Sega ST-V Dark Knight Multi LCD Selector Cart Slot Mount for Lions3 acrylic case (by Clint Kolodziej) This is a case for the Darksoft Sega ST-V Dark Knight multi's LCD selector, designed to attach to the cartridge cutout on the…
Death is not only the leader of the Four Horsemen of the Apocalypse but also the most powerful and oldest of the Nephilim. This high quality 1:1 scale museum replica of Death's mask. The mask leaves no detail unnoticed, featuring every…
This is an airplane from the Microsoft flight simulator game! It's called the Dark Star! Please leave comments!
A 3d-printable model of the darksaber seen in the Star Wars series The Mandalorian
This is a digital 3D printable model of the Darksaber from the Star Wars: Rebels. The download contains 3D model ready to be 3D printed on a 200 mm print bed. SIZE At 100% scale, the Lightsaber’s dimensions are approximately: Height 254…
This Darksaber not only has a collapsing blade but its also changeable. The catch on the pommel is spring loaded, you push it to one side to unlock it. This version is Saber Plug compatible! This is a print-in-place spring-loaded cap that…
0,4 nozzle, 0,16 mm. *Make sure to add supports under Shadow's head so that what happened to me doesn't happen to you.
Custom GPS mount for the GEPRC DarkStar 22 micro cinewhoop. Designed to fit an 18x18mm GPS with compass (like the Flywoo GOKU GM10 Mini V3) into the stock 15x15mm mounting area. The tolerances are tight, but it works—giving you GPS Rescue…
UPDATE: 2023-06-21: Added an alternate shroud clamp that allows the mounting of a Creality Sprite DD extruder. This is where my X axis linear rail conversion has led me to. You can find the linear rail conversion and carriage here:…
Warcraft Rumble - Darkspear Troll, provided by Blizzard https://warcraftrumble.blizzard.com/en-gb/collection
