Liczymy pasujące modele…
I had a vision of a pop-art, digital, illustrative style drippy paint bucket and had to make it come to life! I designed this entirely in Fusion360 and printed on Prusa MK3S and MK3S+. All parts print and fit together well in PLA at .3mm…
Do you like your Drippy Bucket but wish it had some compartments? This is it! It is held in by the “Drippy” component, prints with no supports, prints fast at .3mm layer height and gives the appearance that the interior of the Bucket is…
This is a remix for ikea skadis. You can choose between the diffrent inlays to organice your pens or something else. I have an extensive skadis collection, you can find it here. All parts print and fit together well in PLA at 0.2 mm layer…
From the original designer of Drippy Bucket and Drippy Pail comes… Drippy Drum! If you already have Drippy Bucket or Drippy Pail and wish they were less paint-y and more hazardous-waste-y, this is for you! Drippy Drum is the same basic…
From the original designer of Drippy Bucket comes… Drippy Pail! If you already have Drippy Bucket and wish it was less round-y and more square-y, this is for you! Drippy Pail is the perfect companion to Drippy Bucket and is ready to help…
Two versions of the Drippy Display Shelfs. The pattern fits together so that they can be hung next to each other to make a longer shelf. Or be mixed up as I have done. Before hanging, I highly recommend printing this model so that the…
Fits into the bottom and top of the “wall-honeycomb-part.stl”. I have mine held together using the tri-hollow inserts where the borders connect, and then a dual-hollow insert on the ends. I may end up modifying the pieces into a left and…
Lots of different divider options to choose from. Pick the one that best fits your needs! __________________________________________________________________ 🧡 Let’s Both Earn Some Prusameters! If you like this model and are thinking about…
Suggested print settings: Layer height 0.2mm. Infill 15%. Perimeters: 5. No supports are needed. Print-in-place.
Good for vase mode and scaling too! Uses Fibonacci sequence to create the pattern. Enjoy!
Inspired by the drippy bucket I wanted to challenge myself to designing a dripping ice cream cone. From this I wondered how it could be used practically and thus spawned the drippy shifter. This design is made up of multiple parts with…
Drippy Tissue Box For tissue boxes with max. 230 x 115 x 65 mm 0.20mm Standard support only for main part PLA / PETG
Drippy bucket, its now leaking paint onto your desk. Bigger drips and large and small paint leak's. PSA: I am not responsible for damage to any of your property from leaking paint! Inserts for the Drippy bucket found here.…
Printed in PLA layer hight 0.15mm Made also a nice key, so the opening of the piggy bank is more authentic.
i wanted Multi-purposes box with cover and the same design with Self-watering SO i came with this and big thanks to the original design https://www.prusaprinters.org/prints/73258-drippy-bucket-with-divider-insert which helps me alot Happy…
I made a remix of the Drippy Box without handles and a little bit bigger, so all my daily chargers and cables find a good looking place… The measures are at 100% ~ 15x10x9,5cm. ___________________________________ My print settings:…
Of course inspiration comes from the infamous Drippy Bucket. Liked it so much I wanted to see what other objects could benefit from this beautiful concept! Low and behold my first attempt with the DRIPPY MUG. I made three different…
Remix of the famous ‘Drippy Bucket’ I loved the design so much but it was taking more than 12hrs to print just the bucket and drippy. I wanted something which was a slim version of the same so I made on (made one completely from scratch).…
Skadis Drippy Bucket but modified not to require supports. It has a hook system that can be printed separately. Print 2 of the hooks. This just includes the bucket and the hooks. Refer to…
Here is a self watering planter insert for the Drippy Bucket from davemoneysign. The only thing you need is some cotton or tissue to put at the bottom of the planter. Can be printed with PLA without any support (with PETG I think it might…
A remix of the insert of the round "drippy bucket". This one has different levels (heights) to cope with your stuff of different sizes. Six compartments with a height of (roughly) 10, 9, 8, 7, 5 and 3 cm.
I really like the design of this model, so I adapted it for my honeycomb storage wall. It has three connectors on the back, but for light stuff like brushes, the top two will do fine. Added a paint brush (sub) insert which fits in the…
Remix of the famous drippy bucket, changed de dimensions to make it more suitable for a toothbrush holder, also can be used as small pen container. Original model: https://www.prusaprinters.org/prints/73118-drippy-bucket Print setting…
Remix of the drippy pail. No Lugs and No logo
Mini Drippy Weed Drum - Scaled down 1/8ths 3 Parts
I created these left and right corner pieces to align with the side border pieces from @OwLArt's border remix below: https://www.printables.com/model/434926-borders-for-honeycomb-storage-wall-smallest-size
Davemoneysign made the incredible drippy bucket. Robin made a remix with a screw top lid that is no longer available. I stretched the remix to make it taller. My daughter stores crayons in the drippy buckets. The screw top lid remix was…
I liked Printuin's drippy bucket remix for Ikea Skadis, but found the pegs were too snug to easily fit on my print. I very slightly trimmed the pegs and now it fits great.
LiquiForm: The Snack/Dip Bowl transforms everyday serveware or a catchall tray into a striking piece of art. Designed to look like it’s frozen mid-melt, this bowl drips and oozes organically into smooth, rounded tendrils that pool at its…
The lid should have 98% diameter of the “drippy” part.
Remix , Drippy Papierbox . passend zu Drippy Bucket . Innenmaße : 9,6x9,6 cm Höhe 9,8cm ohne Support gedruckt , Tropfen gedreht auf die Oberseite.
More than a year ago, I designed a Secret Box that can only be opened using centrifugal force. It gained many fans, even though it wasn't very easy to print. Today, I’m presenting a new version: easy to print and much more visually…
A perfectly spooky Halloween decoration to hold your candy or keys or the hearts of those that wronged you. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
The screw holes can easily be marked on the wall with, for example, a pencil. A level can be placed on the edge of the template or you can simply use your phone as a level
The Famous Skadis Drippy Bucket with T-Clip system
Remix of the original square drippy bucket (https://www.printables.com/model/330992-drippy-bucket-square) but with the handle bosses and bottom logo removed.
This handle can be printed horizontally
This is a remix of the drippy bucket with a cleat in the flat side of the bucket which slots into the pegboard mount. Color infills and accessoires of the base model are fully compatible and need to be downloaded separately! Bucket prints…
Printer with dualcolor printing option required
Print in Vase Mode w/1mm bottom. 38mm hole fits all LED tea lights. Fast print, no supports! Check out all my trees! Created in Tinkercad like most of my geometric models!
The shift adapter is best printed in ABS, ASA, or a high-temperature CF-reinforced filament, as this takes all the strain of gearshifting. I printed the ice cream in BambuLabs TPU 95A for a softer grippy feel (and it works great). Cone is…
Inspired by Whadup's Flip-Top Bin (https://www.printables.com/model/609966-remix-drippy-flip-top-bin) I created this new Flip-Top Lid that's removable and allows a bag to be placed inside of the bucket or just an easy clean. Prints…
Also they are stl files now I can't even remember how I got them to be stl files as they have been just sitting on my computer and I had to make them 94000% bigger So yeah and they're ready to print I'm not including the insert because I…
Note that there are mounts for different boards here
MakerDeck Drippy Pail Remix of the amazing Drippy Bucket/Pail for a MakerDeck display at ERRF . Print Files - Description MakerDeck-Pail_v1.2.stl - Drippy Pail with MakerDeck logo MakerDeck_Pail-Slice.stl - MakerDeck Logo Slice inserts…
A remix of my original drippy shifter to add the option for chocolate chunks in the ice cream top. There are two styles of model for this, one for use as a single multimaterial print and one for printing off the chunks separately and…
davemoneysign created the nice drippy bucket: https://www.printables.com/de/model/73118-drippy-bucket/comments/580281 I needed a lid for it. So it follows the design for a paint can lid. No support by using PLA.
Its a fun little bucket turned into a handbag This remix was created with FreeCad and prusaslicer. Pleas check out Drippy Bucket for the Original. Other than the printed parts, about 1 meter of 1.75 mm Filament is needed for assembly.…
I remixed the original model so that the handle and bucket are one piece. Printed in PLA. 15% Infill. No Supports.
20.4 x 6.4 cm shelf designed to fit the gap between my medicine cabnet and mirror. Holds most cologne & perfume bottles nicley. Uses the velcro 3M command strips to attacth to the wall. It was able to hold 1.5Kg with minimal signs of…
A playful, drip-inspired cup that looks like it’s melting! Perfect as a mini planter , pen holder, tealight container, or even a drinking cup (with food-safe coating). Easy to print in one piece – a unique touch for any desk, shelf, or…
This is just the main body of the barrel with the modified symbol. Please see the original Drippy Drum by davemoneysign for the rest of the part files. Out of respect, I've left his logo on the bottom as it was in the original.
all the lids i could find seemed to not fit the bucket so i made this its simple and fits the bucket at 50% scale
Drippy Box v1 -Printed in PLA -Prints in 2 parts Tree Supports (Auto) A little hard to remove around brim of drips. Have not tried printing without supports. 2mm Layer Height Printed at 300 mms on Creality k1 max & Anycubic Kobra 3.…
Enjoy this cute and drippy design.
Save your money with this fun paint bucket bank! (CASH FITS)
Recommend disabling supports for the upper mouth. Use my 3MF for custom supports. I use an A.I. App on MakerWorld then I bring the models into Tinkercad to fix them.
This is just a remix of the classic Drippy Box. Nothing special really. I find it hard to get a good look by simply resizing the original (the Drippy often looks “off”). I've uploaded a 3MF file that can be loaded into a slicer and the…
Extension of original Drippy Bucket that creates an area at the top. This makes the plant stem stay in the middle so that it doesn't fall over and lets you decorate your flower pot with some stones around your plant on the top. ! Plastic…
Funny 3D Printed Garbage Bin
Knob for EC11 rotary encoder. Designed for a standard 6mm shaft, with a 20mm height. (The 20mm dimension is the most common). This is a variant of the Drippy shifter knob, which is a variant of the drippy bucket. I removed some of the…
This was designed to be printed in vase mode and fill out the build plate. I printed mine using a 1.8mm nozzle with 2mm line width and took about 6 hours, should work well with smaller nozzles too, feel free to scale it to your needs.…
A drippy plug with a raven skull, for ears.
drippy bucket but it is closed
Here's a little decor piece to put on shelves, cabinets or picture frames. It should stay put on it's own, but if you want to play it safe you could also add some double sided tape. Print upside down with ironing for best results!
Smiley Face Wall Hanging (with sawtooth picture Hanger) Category: 2D Art
This is my "Bloonarious" inspired model from the BTD6 games. This boss bloon, featured in many boss events, is based more on the official artwork rather then the in-game model's design, but I did add some extras to match the in-game look…
Skibidi toilet FOLLOW OR DIE!!!
Add a splash of color to your home with this drippy paint piece that you can simply stick on top of your cabinet, shelf or picture frame. You can just put it up there and it should stay put, if you want to be extra sure you can easily add…
Here's a little shelf to add a splash of color to your wall. It looks like drippy paint, or - depending on which color you print it in - molten cheese, blood, alien goo - you name it. The shelf comes with cutouts for basic mounting. On my…
A playful, drip-inspired cup that looks like it’s melting! Perfect as a mini planter , pen holder, tealight container, or even a drinking cup (with food-safe coating). Easy to print in one piece – a unique touch for any desk, shelf, or…
Add a splash of color to your home with this drippy paint piece that you can simply stick on top of your cabinet, shelf or picture frame. You can just put it up there and it should stay put, if you want to be extra sure you can easily add…
Here's a little decor piece to put on shelves, cabinets or picture frames. It should stay put on it's own, but if you want to play it safe you could also add some double sided tape. Print upside down with ironing for best results!
This is my "Bloonarious" inspired model from the BTD6 games. This boss bloon, featured in many boss events, is based more on the official artwork rather then the in-game model's design, but I did add some extras to match the in-game look…
Lots of different divider options to choose from. Pick the one that best fits your needs! __________________________________________________________________ 🧡 Let’s Both Earn Some Prusameters! If you like this model and are thinking about…
I added a card holder on the z seam as to hide it and be functional. This is only the outside bucket. Size hasn't been altered in any way. The divider and paint drip should fit as they did with the original model.
This is another divider insert for davidmoneysign's fantastic Drippy Bucket model. It has the same dimensions as his original insert, as well as the inserts designed by SpeakingOfBrad. This divider features two main sections, plus a…
Just a Juice WRLD fan thought Id make a drippy 999 logo! I scaled it to 1000% and printed in PLA but make it as big as you'd like!
A nice vase design that can be printed without support material. Scale as needed/desired. Support If you'd like to support me for the 3D models I distribute for free, you can use my AliExpress affiliate link:…
A nice planter design that can be printed without support material. Scale as needed/desired. Support If you'd like to support me for the 3D models I distribute for free, you can use my AliExpress affiliate link:…
Created an angled stand for the drippy bucket to fit under my monitors, allowing for easy access to the contents.
I wanted a lid for my Drippy Bucket so I made one! The bucket and handle are printed separately and glued together. I printed the lid and handle at the same time at 0.2mm using Neon Green PLA from EasyPrint it took just short of 8h on my…
Designed to house a GU10 bulb in a ceramic socket secured with M3 screws, or just use what you have lying around. GU10 socket Bulb No support required. I printed in black PLA and opaque PETG, but other colors would be cool too! Measures…
This is a “Drippy” towel holder for showers with a frame that I designed and printed for my wife. Its designed to fit over a shower with a frame and has a 24mm gap currently. I've included the STL file so that it can be adjusted to fit…
In case your pegboard has a hole distance of 1.5" with slightly bigger diameters, you might want to check out v2 of this model.
This is a remix of the lovely SKADIS Drippy Bucket by printuin (which originates from the Original Drippy Bucket by davemoneysign ) to accept the “universial hook” of CSD_Salzburg s IKEA SKADIS Universial Hook Set . To print you version…
This is a remix of the lovely Drippy Pail by davemoneysign to accept the “universial hook” of CSD_Salzburg s IKEA SKADIS Universial Hook Set . To print you version you need to download the handle an insert from Drippy Pail and the…
update – see my new model for updated stl. Drippy Bucket Bank with Screw Lid by EMarrs | Download free STL model | Printables.com I remixed the “screw lid drippy bucket” to be taller. This remix now adds a coin slot option in the 3mf…
This remix holds artist brushes as they dry. Print with no supports needed anywhere.
Drippy numbers 0-5 with sawtooth hangers. Category: 2D Art
Drippy numbers 6-10 with sawtooth hangers. Category: 2D Art
Print profile 0,20mm SPEED (Input Shaper) No glue needed, all snap connections, and I recommend printing in PLA for dimensional stability, however others have had success with PETG as well. As described by the original author
Tall Drippy Bucket Piggy Bank with Screw on Lid. This prints best with a 0.4mm nozzle, up to 0.3mm layer height. The threads do not print well with a 0.6mm nozzle.
Please print this with the flat opening down on the build plate add a pause at layer 16 to add 4x 19mmLx 9.3mmWx1.65mmD rectangular magnets I used 0.15mm Layer Height with 30% infill and got perfect results the first time. Manual Tree…
The handles were a little big for my purpose so I made them a little smaller. Now it fits easier on the table.
![[REMIX] Drippy Flip-Top Bin](https://media.printables.com/media/prints/609966/images/4848897_0fda6b34-abb8-4201-af3b-21725af2ffd1_398a9720-442d-4da9-bd5c-9711d1ce655e/img-0.jpg)
