Liczymy pasujące modele…
After downloading & printing the Used Battery Container by Elite_Worm (https://www.thingiverse.com/thing:4881782) I seen one comment asking for a 9V version. I thought to myself I could probably design something like that so I tried it…
Recently I saw this flashlight at Costco https://www.costco.com/duracell-2500l-flashlight-.product.100686747.html Decided to buy and give it a try, I liked it. So I designed the piece below to have it mounted to the Jeep JL seat. Works on…
This flashlight holder can hold any <46mm / 1.81" (diameter) flashlight such as the Duracell 550 / 600+ , The Coast G50, Dorcy Pro / Ultra, Eagle , Pelican tactical, Maglite, etc… Note: >You can print it in any filament you want. > Use…
Costco recently had 3 packs of these flashlights on sale for $20. Really like these flashlights as they can be both rechargeable or use AAA batteries. With a focusable lens they seemed to be a great all around flashlight for the house. I…
Reupload of https://www.thingiverse.com/thing:4681860 made by j_conlan1970 @j_conlan1970, if you ever upload this on printables, let me know and I'll remove this upload.
ING - Printed using PLA - Layer height 0.2 - Nozzle 0.4 - Use support - Activate extra perimeters on overhangs Glue the metal pencil sharpener with Super Attak glue ITA - Stampato con PLA - Altezza strato 0,2 - Ugello 0,4 - Utilizzare…
relleno 100% retraccion. 4.8 PLA
This is a hard plastic replacement switch instead of the original rubber switch that comes with the torch.
Gel holder for Mini Maglite and Duracell 350 led , Design to help with light painting photography, made to be used with gels of 45mmx75mm. Everything is snap fitting no glue is needed. Category: Camera
Gridfinity bin for Duracell 600 lumen LED work lights. This 3 pack is from Costco. Bin is Gridfinity 6 x 4 x 6. The 1 piece version for those with large beds. The 2 piece version has a 3 x ~3.25 and 3 x 2.75 pieces that you can just put…
relleno 100% retraccion 4.8 no requiere soportes
This is a storage box I designed for this worklight set - https://myproduct.duracelllights.com/products/1500-l-3-pack-worklights It fits all 3 light in snugly. I made mine out of PLA as I keep them in my house. If you keep them in an area…
This is a storage box I designed for this worklight set - https://myproduct.duracelllights.com/products/1500-l-3-pack-worklights It fits all 3 light in snugly. I made mine out of PLA as I keep them in my house. If you keep them in an area…
Have been battling moths with my Bug-A-Salt for a few months and had been holding a flashlight while trying to hunt my pray, made a side mount for a common Costco "Duracell" branded flashlight (but will work with any ~31-33mm flashlight.…
ING - Printed using PLA - Layer height 0.2 - Nozzle 0.4 - Use support - Activate extra perimeters on overhangs Glue the metal pencil sharpener with Super Attak glue ITA - Stampato con PLA - Altezza strato 0,2 - Ugello 0,4 - Utilizzare…
This is a flashlight mount that you can attach to your Picatinny rail, to mount a Duracell flashlight.
Made this because I was doing my first gridfinity in my kitchen battery drawer but couldn't find one for my chargers (we've got a couple of these). Figured it wouldn't be difficult and I'm pretty happy with the results. Holds the charger…
I split the model created by @drewprice in two and added a dovetail. This model can print without support and has the advantage of having a stronger support for the clip. Printed with ASA/PETG with 4 wall, 4 bottom/top, 25% Gyro infill.…
I hope the model is useful for anyone who may need a product of this type. Any printer settings can be used, I use PLA at 10% infill. Be careful when orienting in the slicer, if you wish to print this make sure you use supports if you…
Have been battling moths with my Bug-A-Salt for a few months and had been holding a flashlight while trying to hunt my pray, made a side mount for a common Costco "Duracell" branded flashlight (but will work with any ~31-33mm flashlight.…
Duracell PowerBank Slot pour alimenter divers montages électroniques. Utilise le câble USB fournis avec le powerbank mais peut être adapté pour d'autres tailles de connecteurs.
This is an update to the Duracell mount for the gel holder, I found the mount was holding the flashlight to loosely, if you already printed, I am sorry for this late update, I fount one turn of electrical tape around the flashlight will…
This flashlight wall mount installs with two screws. The inner diameter of the clamp is 32.2mm. 0.6mm nozzle, 0.3mm layer, PETG, Sovol SV01
Works for model: https://www.printables.com/model/452573-rugged-box-with-modular-slots-parametric-normal-he The original AA battery inserts were very tight for Duracell AA rechargeable batteries. It was 14.7mm, and I have increased it to…
Full size dimensions are 538 mm x ∅150 mm. For the gold part I used Formfutura EasyFil PLA Gold which is pretty close to the real deal. On my printer the letters were an interference fit that could be smacked in with a hammer. It fits a…
Opening in the back potentially allows for charging while in the storage container.
