Liczymy pasujące modele…
With PLA you can only expect about 60°c before it starts softening. I would now personally recommend ASA, because it can handle 100° before softening. Update With the success of the model I decided to spend a little time and make the…
This is one of the funniest 3d prints I have ever done. 3d Print should be easy. Might have to use supports
This OctoOctoRocktopus has 57 heads or should I say Pentacontaheptagon . This is a masterpiece. DOWNLOAD NOW! Print large since heads become very small.
This is the model of what everyone thinks is under that shirt of Dwayen's. this was made in blender and it is my first model I've ever made and posted. enjoy freaking out people with this as a gift or gag or to watch over you while you…
Very funny model of Dwayne "The Rocktopus" Johnson. Multiple size variants so there is something for everyone. Please make sure the print bed has been cleaned before printing. If you have problems with adhesion, you can also print the…
print and then screw into base leaving a gap between the head of screw and Dwaynos head, make sure the screw head is just slightly larger than the hole in the crocs, push the screw through the hole and TADA Dwayne the Croc Johnson
The Rock? A Christmas Ornament? So I wanted to try out Meshmixer for the first time and thought this would be a good start. This is 'Little Mitch' from Baywatch 2017, whilst the actual film was, erm. Yes. This little character addition…
Ok, this model kind of creeps me out. I took The Rock's face, gave him minion glasses, and put him on a dog. It's a legit weird model, but everyone I've shown it to has laughed so hard and loved it! So print it, and you will not be…
Layer height: <0.30mm Supports: N Nozzle: 0.40mm Weight: 3.38g Material: PLA Print Time: 13min
Printed at .2 layer height Supports are optional, depends on the printer
Now we finally know what Master Chief looks like under that helmet. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.1mm Infill: 10% Filament: Polymaker PLA Matte Grey
The Rock, in this wild adventure, is now a cat… with a disturbingly human-looking head. I got bored and thought, hey, why not combine two designs?
With PLA you can only expect about 60°c before it starts softening. I would now personally recommend ASA, because it can handle 100° before softening. Update With the success of the model I decided to spend a little time and make the…
Remixed from this The Rock model: https://cults3d.com/en/3d-model/art/the-rock-solo-bust and this Shrek model: https://www.thingiverse.com/thing:2871042 V1 has no ears for printability, V2 has Shrek ears
Fits regular crest toothpaste tubes. If there is a problem let me know plz, or if there is another thread size you want please let me know in the comments. Inspired by…
I am partly new to 3d designing so please let me know of any issues. I am very active in this community and usually respond to issues before 24hours. And will remake model if any issues An hybrid of Dwayne “The rock” johnson and a…
I created the “ Coat hanger with hidden screws and stealthy design " a few days before the hook competition started meaning it could not enter. Instead i created some patterns which can be used to make anything a compatible hook! This is…
This is a Dwayne "The Rock" Johnson" DJ Encoder Knob made specially for the Hercules: Custom DJ Knobs contest.
I suggest to print this with supports because there are a few overhangs and if you make it with tpu please share it with us so we can see how Dwayne's head looks like squishable. Please Like and Download to show your support for us. Yes,…
Regirock STL came from https://www.thingiverse.com/thing:3019610/files
This is one of the funniest 3d prints I have ever done. 3d Print should be easy. Might have to use supports
This OctoOctoRocktopus has 57 heads or should I say Pentacontaheptagon . This is a masterpiece. DOWNLOAD NOW! Print large since heads become very small.
I made the Model with the help of a can model, don't remember where from though. I would recommend making the bean model at a much smaller scale, but to each there own.
This is the model of what everyone thinks is under that shirt of Dwayen's. this was made in blender and it is my first model I've ever made and posted. enjoy freaking out people with this as a gift or gag or to watch over you while you…
The Rock, as a block. Hurl it at your enemies, bring it to brunch, give it to your children as a present.
Very funny model of Dwayne "The Rocktopus" Johnson. Multiple size variants so there is something for everyone. Please make sure the print bed has been cleaned before printing. If you have problems with adhesion, you can also print the…
I haven't actually put it on my crocs yet so if you have please comment on how it went Much appreciated
An emergency whistle with the rock's head on it WARNING - VERY LOUD! whistle is from https://www.thingiverse.com/thing:3130078 if you made one then please post a make. 4/25/22 fixed open edges 5/8/22 added Big version that has slightly…
Bring home the legendary charisma and power with this incredible 3D printable figurine that captures every muscular detail in stunning STL format! This masterfully crafted statue showcases the iconic pose and commanding presence, making…
A great Wall Art of Dwayne Johnson The Rock. Do not forget LIKE and to upload your makes, thanks ! As it is very thin, I am not sure it can be easily scaled down, do it at your own risks ;-)
Some supports needed. The Splitting Headache Rock maybe needs aspirin 💊 or a rest 🧑🍳. 🤣🤣 Enjoy! 🎉
If you look directly straight on to this model, it might appear to be “normal.” 🤣 Messed Up Rock needs supports. And maybe coffee. ☕ Or a shot of whiskey. 🥃 Or both! 💪 Enjoy! 🎉🎉
Sexy Celebs - Dwayne "The Rock" Johnson 3D printable model.
My son (12yo) made this. Enjoy Category: Sculptures
My son (12yo) made this in Blender. Enjoy! Category: Sculptures
An extruder knob for the Ender 3 style printers out there. Use supports under the chin.
I had the most success with 90% scale as it seems to help with his chin.
I just plane cut Dwayne “The Heart” Johnson and put some 12x2mm disk shaped holes in the base of his neck which are the perfect size for 12x2mm disk shaped magnets to be glued into… P.S. My printer is broken right now so I can test print…
Another magnificent rendition of The Rock for you to enjoy
Yet another fabulous rendition of The Rock for you to enjoy
READ BEFORE PRINTING THIS MODEL IS IN NO WAY SUPPORT OPTIMIZED, I WOULD RECOMMEND ROTATING THE MODEL SO THAT EITHER THE BARREL POINTS UPWARDS, OR THE MODEL RESTS ON ITS SIDE BEFORE SLICING I don't know if this is a glock or not, I just…
This is the head of a man who goes by many names, and with this model you can create a Dwayne Johnson of your own and add to his list of nicknames This model isn't a great print by itself to be honest, but it is very easily modifiable
Remix of Dr. Smolder Bravestone Support Free Remix by robin3dverse. Removed the Jumanji logo at the front. Dr. Smolder is now The Rock! Please LIKE if you found this useful Category: Sculptures
See 3D Printy's Printer Bobbleheads for additional parts and more information. The head is used from JS-studio's incredible sculpt .
Print Dwayne at any scale you need (mine was 75%) and enjoy his plant-growing abilities. Print Settings: Resolution: .15mm Infill: 15% Supports: No Rafts: No Material: PLA Printed on: Creality CR-10 Note: I was unaware of this, but…
The Rocktopus is one of the funniest 3d models I've ever printed. NO SUPPORTS NEEDED Might want to use a brim or raft for better bed adhesion. I just used slower first layer speeds and it printed fine. This is an original design by the…
Action Dwayne "The Rock" with Bobbling Brain This is a bobble-head Dwayne "The Rock" Johnson toy with action bobbling brain. This toy use a 3D printed spring that supports the brain and makes it bobble. No supports are required and you…
Dwayne "The Knob" Johnson! Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Infill: 15% Filament: PLA Notes: Make sure you printing 15% infill so that you can screw it in.
What am I doing? Experimenting with Meshmixer and Blender led me to this abomination. Settings and Print Instructions 3MF is prepared with seam at the rear, infill, reduced print speed, height modifier and brims for your convenience.…
