31 modeli
A simple set of feet to keep your laptop upright. Save desks space, and accumulates less dust. I have made the feet wide enough so that they don't fall over when taking the laptop in and out of them. Designed for a HP Elitebook, but…
Notebook stand for HP EliteBook 845 G7 that allows for a better height when used in combination with a separate keyboard
Big thanks to tokyo2ooo for the original model. Printed with 15% infill density (gyroid) and 0.2mm layer height (0.27mm initial layer height) and black PLA from DasFilament. Please ignore the wobbling layer for the rounding on the large…
HP Elitebook 820 G3 Ethernet port cover should be ok for other models from same generations, but i didnt check
Harddrive caddy for HP notebooks. Should work with: ProBook: 6560b 6570b EliteBook: 8760w 8570w 8560p 8470p 8460p 8560w 8770w more? Screws are 2 M2x4 and 1 M2.5x8. Though I'm not sure whether the latter really is a M2.5. Print Settings…
Remixed the design by GeekMystique so I could use the stand as a standalone for an HP Elitebook x360 with the screen only, changing the inclination to 65 degrees. It also works well for a traditional vertical laptop mounting. A great way…
Due to the simplicity of the model no supports are needed. I printed with PETG with 0.2mm layer size on 0.4mm nozzle. The exact material and configuration you are using do not matter a lot though I guess.
A Vertical Notebookstand for the HP Elitebook 850G. Print Twice of them.
I liked the design but all that keyboard showing is wasted space…so I added a little bit to the front of the bracket and a support pylon for the back of the monitor. Holds a 15.6" KYY travel monitor at a 16* angle (a vertical viewing…
I designed and made this to get my laptop off my desk. I do not need to access it as I connect to a HP USB C Dock. The USB-C plug fits into the mount so it lines up with one of the USB-C ports. I can then slide my laptop into the mount…
supportfree Laptopstand. Print in Place
The original model fits perfectly, thank you @tokyo2ooo I added fillets to optimize printability. Additionally I made the model 120mm long to fit my needs. I recommend printing the holder upright with a lot of walls for best results.
I lost - on two notebooks - one of the rubberfoots on the bottom - so I designed this, printed it in soft tpu and glued it with cyano-acrylat glue to the notebook - and now it does not wiggle anymore
Simple docking station for the HP Elitebook 840 G8 14" mounted in a IKEA Kallax. Splitted in multiple parts to fit in my Bambu X1 and better printability. I used this calbe to connect to an USB-C Hub. https://www.amazon.de/dp/B09J8TRLNX
I wanted a holder for my SSD while I am using my car diagnostics or while generally moving with the laptop. With this holder I simply put the SSD (which is in a case) inside this holder and hang it from the display as seen in the picture.…
I modified the original version so it doesnt block as much of the notebooks air outlet
Stand for HP EliteBook 640 14 inch G9 https://www.thingiverse.com/thing:6711673
Hello! I designed a cable holder for the HP Elitebook 850 G3 laptop. I designed it because when I moved my laptop, the charging cable kept falling out. I used an M2.5 x 10mm screw…
Print with TPU and use double sided adhesive tape to mount the feet.
This replacement drive cover holds the 2.5 inch drive in place inside the HP EliteBook Folio 9470m. It's designed to be economical with your filament while still being strong and flexible. You will need supports on the screw holes.
Designed specifically to fit the Elitebook 840 14" G9 model, but might work for other similar models as well. The one in the photo was printed using SUNLU Fast PLA, 0.4mm nozzle on a Flashforge Adventurer 5M. Recommended configurations on…
This is a custom-designed vertical stand for the HP EliteBook. The back contour of the laptop has been precisely recreated so that the device fits perfectly into the stand, ensuring excellent stability and preventing any wobbling. You can…
These feet allow for better airflow and raise the keyboard angle slightly. Designed for the x360 1040 G5 with minimal tolerances. Other models might not fit. Use a shock cord to hold both parts together and use some rubber feet to avoid…
Rubber Foot for HP Elitebook 8460P 8470P 2560P 2570P 2170P Print Settings Printer Brand: Bambulabs Printer: Bambu X1C **Rafts:** No Supports: No **Resolution:** 0.2 mm Filament: Bambu Lab TPU TPU-95A Black Notes: Print with TPU and mount…
A fix to my broken PgDown and PgUp key on my HP EliteBook 840 G9. (This is the internal scissor mechanism, and only the part that snaps into the outside part) This is a totally WIP model and I am not sure if it works yet as my printer is…
These feet allow for better airflow and raise the keyboard angle slightly. Designed for the x360 1040 G5 with minimal tolerances. Other models might not fit. Use a shock cord to hold both parts together and use some rubber feet to avoid…
The original model fits perfectly, thank you @tokyo2ooo I added fillets to optimize printability. Additionally I made the model 120mm long to fit my needs. I recommend printing the holder upright with a lot of walls for best results.
I modified the original version so it doesnt block as much of the notebooks air outlet
Print with TPU and use double sided adhesive tape to mount the feet.
