Wyniki wyszukiwania: elmet

Iron Man Mk42 Helmet

Here is Iron Man Mk42 Helmet. Print instructions Category: 3D Printing

How to print the Mandalorian helmet -> size S, M, L and 3D print settings

Using TheBrokenNerd83's design ( https://www.thingiverse.com/thing:3578797 ), I printed the helmet in different sizes and tried to use as little support structure as possible. I share my experience with you in the video. This Video shows…

helmet hook (many versions)

Wanna get the commercial license? Have a look at my printables club. Your wished logo isn't available? Ask me! Maybe I make it. ;-) I have created a helmet hook, which has a wide contact surface so that the padding of the helmet won't get…

Stormtrooper Helmet on Piedestal (STL)

✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) Not really suitable to wear on your head, meant to be printed smaller as decoration on e.g. a shelf. - Aren't you a little short for a…

Stormtrooper ANH helmet

This is a full scale printable Stormtrooper Helmet opening sice at the bottom w:228 mm l:224 mm For the glasses i used acrylic glass. I added the form and the addons for mounting to the files. For the Hovi Mic i used this thing. Since…

German helmet - trailer tow hitch cover 50mm

German helmet themed car decoration 50mm diameter

Star Wars The Mandalorian Full Costume/Cosplay (Helmet, Armor, Jetpack, Blaster etc.)

I've put all the pieces together to print an authentic “The Madalorian Cosplay” with quick instructions. Please pay attention to the size of the parts! scale the parts to your size 12.09.2023 - added new model - The Mandalorian Cardridge…

Wearable Darth Vader Helmet

It has been a long journey, but I was finally able to finish this project. Let me start by thanking Steen Winther. His model ( https://grabcad.com/library/darth-vader-helmet-2 ) was the starting point of this remix. 14 months ago I…

Phase 2 Clone trooper Helmet (Wearable version)

This is a remix of Killonious's model, which I edited to make it wearable and suitable for cosplay use. Original non-wearable version: https://www.thingiverse.com/thing:2718242 Edit: Added split versions, use the one-piece model if you…

Helldivers Helmet

I pulled the 3d model from the game and started modeling it, because nobody should have to pay for 3d models here it is, in its unfished glory! A few more edits will be coming, however if someone can get this version to print (I'm getting…

BEST Helmet Holder Helmhalter

With most helmet mounts, the helmet only rests on a very small area (ball), which can damage the helmet padding in the long term. That's why I designed my own holder that solves this problem. You can also hang your jacket/pants and keys…

Daredevil Helmet

Fits on any Bambu sized printer. Use variable layer height to have it fit.

Phase 1 Clone trooper Helmet (Wearable version)

This is a remix of Killonious's model, which I edited to make it wearable and suitable for cosplay use. Original non-wearable version: https://www.thingiverse.com/thing:3486066 Hmu if anyone needs a split version, or if someone splits it…

StormTrooper Helmet Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

Iron Man Mk3 Helmet

A High resolution model of the Iron Man Mk3 helmet from Iron Man I. Suitable for cosplay. model by Official3D @Official3D follow him <33

Dr Doom Mask - Marvel Doctor Doom Helmet - Cosplay Props - FREE STL

Dr Doom Mask - Marvel Doctor Doom Helmet - Cosplay Props - FREE STL PREMIUM STL File for 3D Printing Follow me>>>: All My Designs: https://linktr.ee/3dprintmodelstore You can support my design work by joining my patreon at here:…

Iron Man Helmet, Articulated, Wearable

Original Thing here: https://www.thingiverse.com/thing:4629346 This is just a reupload under the CC-BY-4.0 License. Original Design by Boxandloop. Update 12/09/2020: Added a wiring video Update the code for Eyes to blink on when facemask…

Casco Moto Llavero - Motorcycle Helmet Keychain

Llavero de casco de moto para decorar tus llaves o accesorios. Tamaño: 21.92 mm x 31.39 mm x 21.51 mm

Beer Bottle Helmet - insect protection - Bierflaschenhelm FDM REMIX

Death Trooper Helmet ( Revison 2 ) Rogue 1

I've been doing a little research on this helmet and have put together my own rendition of this helmet based on the White Amour pictures I've listed here. I recenly made Geoffro's Mk2 helmet from his patreon web site. I'm still very new…

Doom Helmet

Hi Will, I started from scratch with this helmet. Thanks for the original files but there was a lot of information missing in that model, I pulled it directly from the game for which I had : ) Hopefully in this version you will see a vast…

Spartan: Corinthian Helmet

Spartan: Corinthian Helmet . Probably going to make this into a keychain. The orientation of the sliced file is not optimal (I am guessing)

Halo Infinite Master Chief Helmet

Master Chief Helmet Made by Kolnic over on thingiverse at https://www.thingiverse.com/kolinc/designs , thought some people here would wanna print it, I have and it is an amazing very detailed. Sadly no remix for visor free version, but…

motorcycle helmet holder

Did find this model on thingiverse very handy for placing ur helmet niceley on the wall. Gcode provided is with Amazon Petg ! be care full. printed with 6 perimeters and adaptive cubic infill or Gyroid 60% more models for this hook in…

Wolverine Inspired Helmet

Wolverine Inspired Helmet Enjoy New version available at my shop - https://www.cgtrader.com/3d-print-models/hobby-diy/other/wolverine-deadpool-3-movie-mask Category: 3D Printing

Lego Minecraft helmet and body armor

Easily printable parts for Lego Minecraft figures more work on more work also on https://dxbworks.etsy.com

Stormtrooper First Order TFA Helmet | Screen-Accurate Star Wars Cosplay Prop

Stormtooper First Order The Force Aweakens helm weareble the 3mf files are prepared for multicolorprint the holder for the helmet inlays can be deleted in prusaslicer or windows 3d builder same for the speakermounts for the background…

The Batman 2021 Inspired Helmet

The Batman 2022 Inspired Helmet Enjoy Category: 3D Printing

Iron Man Helmet

An Iron-Man Helmet that can be used for cosplaying or just displaying. Model contains: 3-Parts for the model to print. Size can be any use. Use Any type of Filament for this model if you want. Remix if you want to change the model or do…

iron man mk85 helmet

iron man mark 85 helmet please size to your head before printing https://www.thingiverse.com/thing:4607836 link to motorize this helmet you will need some mg90 or sg90 servos the video below this a great video on how to make the helmet…

Fallout 76 T-51 Helmet

There was a really good one of these Helmets over at the MiniFactory that Daniel Lillygreen did, but 'm not sure what happended to it and as a big fan and due to the share number of requests. Here it is in all its glory. Also a big thanks…

Darth Vader Helmet Variants 1 - 2 - 3 & Armour

This has been on my ta do list for months and I've had numerious requests for this Helmet. I've done my best to provide 3 differant variants of the Helmet as evey one likes alternatives, so you now have plenty to choose from. Like…

Spartan Helmet

Printer brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 10% Filament brand: Polymaker Filament material: ABS Notes: I printed it upside down on the print bed to minimize the amount of supports…

Iron Man Mark 46-47 Helmet

Mark 46/47 helmet Full suit is now available at my shop. Link below 1.-Sizing - The Helmet may need to be sized for your needs, as it is roughly sized to fit a Average male I recommend using my FREE Heads for Sizing here -----…

Stormtrooper Helmet – Star Wars

Ten model hełmu Stormtroopera został zaprojektowany z myślą o druku 3D oraz wiernym odwzorowaniu kultowego wyglądu znanego z uniwersum Star Wars. Projekt posiada wyraźne detale, gładkie powierzchnie oraz poprawne proporcje, co ułatwia…

Master Chief Mark VI Helmet (The Master Chief Collection)

Printed to be a desk ornament. .2mm layer height, 15% infill, and supports needed for the underside. I made the one in the pictures using Hatchbox Metallic Silver PLA

Mandalorian helmet

Remix of the “The Mandalorian” by ReProps . The helmet is resized to 20% of original to fit a barbie doll :) The size is cca 40x47x51mm now. The skin became too thin to reliably print so made it thicker by inserting inside the helmet…

Fallout 4 T60 Helmet Revision 3

After having been requested to converted the previous model from a pepakura file! More and more people suggested it wasnt quite the correct shape. So after many hours of play and manipulation, I think we finally have somehing worthy of…

Martian helmet

My version of the helmet from the Martian. I never had the opportunity to see the original in person so this is done from watching the movie many times and represents my best estimate of size and proportions. Some adaptations for 3D…

Skull Helmet Holder

Hello everyone. After someone reached out about copyright issues, I have decided to change the mounting system from the default, to my own. It has the same 40 by 40mm rectangular mount but has been changed from the original. The screw…

Wolverine style cat helmet

Here is another cat helmet for all the those daring cat owners. I included two versions in the profile, so you can choose which you prefer. The one that is cut on the bottom will be an easier print, but you do lose some of the look that…

Helldivers 2 Helmet - smooth

I have found some hard edges that were supposed to be smooth V1.1 addresses most of that. If I find time, I will try to fix the air intake holes, there are many broken triangles hiding inside I have it printed! Scaling it to 1000% was a…

Stormtrooper First Order helmet

Stormtrooper First Order helmet wearable Link to the newer and more accurate Model https://www.printables.com/de/model/39467-stormtooper-tfa-helm

Samurai Helmet - Display

! the model shown in the picture was painted ! Samurai Display Helmet for your shelf or setup! Easy assembly! Size: 15cm high 14,5cm wide 12,5cm deep The parts are ready for assembly and only need to be glued together. Connectors are…

Mark 85 Ironman Inspired Helmet

Mark 85 Ironman Inspired Helmet Enjoy Category: 3D Printing

Black Panther Helmet - Civil War

This is HappyMoon's Black Panther Helmet - Civil War helmet Cut for a Ender 3 I did NOT make this, I only cut it for a friend. Enjoy Category: 3D Printing

Iron Man Mk3 Helmet & Suit / Armour

I have a vast collection of pep files from other modlers I collected over the years when I was into pepakura making, This is the Iron Man Mk3 since one and two are already here on thingyverse, I'll work my way through all the versions,…

DUMMY 13 spartan helmet

i made this revision of the helmet sturdier, but at that cost lost some detail print at 0,05 mm layer height with supports, doesnt matter what type

Captain Rex's Helmet (Wearable version)

Remix of Captain Rex's Helmet Phase 2 (Star Wars) by Killonious : https://www.thingiverse.com/thing:2446611 Oh and don't forget the detail pieces You also need the file for the rangefinder: Captain Rex RangeFinder Articulate by camusic:…

Fallout NCR Ranger Helmet Mask

Here is Fallout NCR Ranger Helmet Mask. Print instructions Category: 3D Printing

Satisfactory Helmet - Cosplay Replica (2 Sizes)

Replica of the main character's helmet from the video game Satisfactory. Comes in two size variations. The “large” version is for a 23" circumference head and the “small” version is for a 22" circumference head. Both sizes are designed to…

Sith Trooper Helmet

A big thanks to Danny for providing the low poly model. I have done with it what I could. So hopefully it will be of use for your project. Good luck and do check the sizing suits your needs, Cheers Jace Print instructions Un printed as yet!

Master Chief Helmet

This is an expansion of the helmet by big_red_frog. The .stl's are entirely his without any modification by me. His main interest was in creating the files needed to make the helmet. However he does not go into detail about other aspects…

Dummy 13 Night Vision Helmet/Military Helmet v2 (NOW REMOVABLE)

Now the Night Vision Helmet can be printed separately from the head itself , allowing for a more better color scheme. Goggles move up and down, same as original model. Printed on its side with supports. Layer hight 0.16mm Remixed and…

Iron Man XIV Helmet Mk14

Hi Chris, tidied it up as best I could,hope it works for you and please check the sizing suits your needs, as always I look forward to seeing pics of your progress, Cheers Jace

Football Helmet

Here is a American Football helmet I created from a 3D scan I found of a Riddell helmet. Scale to your needs. I wanted to use it split in half to easily hang on the wall. The face mask was extremely difficult to print. I ended up needing…

Iron Man Mark 2 Helmet

Scale to Your Head It wont fit it was scaled to me, Thank you for downloading! Have a Nice Day!

LOTR The Witch King Helmet

Hi Rodney, yes I do have The Witch King Helmet from the Lord of the Rings. Good luck and post some pics of the finished item if and when you get round to it. Cheers Jace

Football Helmet for resinprinting

Made this remix for a friend who wanted a small resin printed helmet.

Titanfall 2 - Viper Helmet

Full size helmet with room to add LED lighting. You'll need to find a visor face to suit and I also used a wire coat hanger for detailing. I have had a few questions about sourcing parts for this build, they were all purchased from…

Helmet holder low-poly skull remix

This is a remix of two wonderful models: Ultimate Helmet holder by Flobi Low-poly skull by Peter Farell where you can use the low-poly skull instead of the original ball that goes on top of the helmet holder main body. Printing…

Daft Punk Helmet

This is a remix as mentioned in the summary. I made this for a friends birthday and modified it to fit a standard 32x8 LED Matrix from Amazon. The modified files are the ear cups (threaded and hollowed to house electronics) and the front…

Robocop Helmet Remix

Thanks to Mike for bringing Omega's model to my attention https://grabcad.com/library/robocop-helmet-1 This amaizing helmet has been discussed with the idea of bringing it to life as a wearable model. I'm still learning, so it is the best…

Cat Helmet

Just for fun, it looks my cat does not like it :D

Fallout: T51b Power Armor Helmet - Dice Tower

Fallout: T51b Power Armor Helmet - Dice Tower Removed Old Files. Hole is now 26+MM wide to accommodate dice better. Also the bottom is flat and should need less support. New files called helmetnewa.*** THANKS w3dn3sd4y for the heads up.!…

Motorcycle helmet holder

Design from https://www.thingiverse.com/thing:2504368 I have added supports - download slicer project in files. Printed in PLA - 0,2mm with 10% infill. It is very sturdy.

Knight Helmet / Armour

I'd always liked the idea of have one of these hanging up in the man cave ; ) Cheers Jace

Mandalorian Swivel Helmet

This helmet is an involved build and requires additional hardware to assemble. The scale of this helmet is a Mens Medium (23" head circumference). Simply scale the helmet up or down to fit you properly. I have shared the STEP file as well…

New 52 Batman Inspired Helmet

New 52 Batman Inspired Helmet Enjoy Category: 3D Printing

Optimus Prime Helmet

I have thickened the shell and smoothed it where possible. Not sure if it will be wearable due to some of the cavities inside. Print instructions Category: 3D Printing

Dummy 13 Motorcycle Helmet with Posable Visor

A motorcycle or racing helmet with optional visor. The visor can be opened or closed. You should be able to print the helmet without support if your bridges are good. It might need a little post processing if you get sagging filament on…

Helmet hanger

Simple helmet hanger, inspired by other models, but created my own model for correct sizes. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: Filamentum PLA space gray…

Vintage Deep Sea Diver Helmet

I designed this deep sea diver helmet from scratch on Shapr3D. It is not an exact copy of any particular helmet but elements taken from several different ones. It is a detailed model and best printed on an SLA (resin printer). Could be…

Star Wars: The Clone Wars ARF Clone Trooper Helmet

First Star Wars helmet of mine, modeled in Blender based of Battlefront II character gallery. Cut in three parts for easy printing and assembly with bigger printer (I use Ender 3 Max). For smaller printer additional cuts have to be made.…

Skull Helmet Stand (Ballistic/Bump/NVG/NODs, etc.)

Remix of: https://www.thingiverse.com/thing:6341148 and https://www.thingiverse.com/thing:2596157 I have used a different skull that is simpler to print and much faster to print (half time for my settings). I used PLA-CF which came out…

Iron Man Mark III Helmet Separated and Oriented

This is a remix of the original MIPRESIDENTE Iron Man Mark III helmet posted here on Thingiverse. My goal was to separate the model, orient in the best printing direction, do a little clean-up, and then publish them as ready-to-print. A…

Knight with pig-faced helmet 28mm (FDM, no supports needed)

A knight in a bascinet, pig-face visor (hounskull/hundsgugel) helmet. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with…

Mandalorian Helmet - Piggy Bank

A Mandalorian Helmet piggy bank (money box) which is fully 3D-printed and can be opened and closed thanks to a locking screw mechanism BambuStudio file available here: https://makerworld.com/en/models/486544#profileId-399287 It needs…

Spider-Man 2099 Inspired Helmet

Spider-Man 2099 Inspired Helmet Enjoy Category: 3D Printing

Stormtrooper helmet towing hook cover

Stormtrooper helmet towing hook cover With this you should be save not to hit anything with your towing hook, it‘s a stormtrooper what should he hit? But if you hit him with your leg, it will hurt. But anyway, it looks cool. Create your…

Iron Man Helmet

Public domain Iron Man helmet by YannCnl . Originally uploaded to BlendSwap .

Motorcycle helmet hook.

Tisk je velmi jednoduchý. Pevnost je dostatečná z PLA, ale můžete klidně použít PETG. Tisk vrstvy 0,2-0,28. Tyto dva soubory jsou rozdílné pouze v otvorech na vruty, kde jeden je na plochou hlavu vrutu a druhý na zkosenou hlavu vrutu.

Kylo Ren Helmet

THESE FILES ARE PROVIDED FOR FREE ON A NON-COMMERCIAL LICENSE - PLEASE DO NOT SELL PRINTS OR COPIES OF THESE FILES @Magnavis_ on Instagram & Twitter If you would like to show some support for my files, you can do so here:…

Simple Helmet Stand

This is a helmet stand I made as I just wanted a simple way to display my cosplay helmets that would hold them up off of a surface. Didn't want to ruin paint!

Titanfall Kanes Helmet

This was another helmet in the Titanfall series that I really liked and have been slowly working on over the passed few weeks. It was originally quite a large file so I had to decimate this one quite a bit to get it up loaded here on…

Aran Tal: Star Wars inspired Mandalorian Helmet

This is my custom Mandalorian helmet based off the character Aran Tal from the new Star Wars game, Star Wars Hunters

Titanfall MCOR Helmet Revision 2

I have had dozens of requests going back months to revisit the original Titanfall MCOR helmet. I'm trying to get as close to the main picture as possible, but I still have so much more to learn. So here it is to the best of my abilities…

Engineer Helmet

This helmet is the perfect gift for your most loved engineers

batman helmet for cats

batman helmet for cats

Astronaut Helmet for Lucky 13 Starman

A SpaceX “Starman” Astronaut Helmet for Lucky13 , Dummy13 or Easy13 Print with white PLA or PETG and use a black permanent marker to color the visor. You need a little bit support on the bottom (see Prusaslicer project file) Two sizes…

SW Republic Commando Helmet Split Print Ready

It has been bought to my attention the helmet was done by Dan Inskip over at the MiniFactory. For those of you wanting to print the helmet complete on say a CR10. head on over to the link below and give thanks to Dan for his great work.…

Helmet Hanger

I created this support because I couldn't find a support that satisfied me. I printed the prototype, then saw some changes to make and made them directly to the file I uploaded. It works very well, is very durable and is a great idea if…

Dwarf Helmet

Summary https://grabcad.com/library/erebor-dwarf-helmet-1 Originally inspired by the helmets worn by the dwarven warriors of Erebor, I liked the shape of this so I tried my best to make it printable (with permission from the original…

Gundam Build Strike wearable helmet

Please note this is an untested print. Inner whole from left to right is 16cm wide incase you want to increase or decrease the size to suit your head. I have slice it as best I could to print, but there was a couple of objects that will…

Master Chief Helmet - Halo 4 / 5 MKIV

The helmet that Master Chief wears in the Halo 4 / 5 games. It is wearable. I scaled down to about 90% and is still very large and fits. Is cut up for Ender 3 as well as some larger printers. The cut-up pieces need to be mirrored. Also…

Modern Army Military Helmet

My son wanted a modern Army helmet, but wanted it in his size! So, I modeled up this helmet based on the one I had while I was in the US Army. Pretty simple design, but does have the holes for attaching the chinstrap. Make sure to scale…

Viking helmet

Viking helmet. Printed with PLA and 0.3mm layer height.

Helldiver 2 Helmet Collection

Collection of 29 Helldiver helmets that were pulled from the game by the hard working folks at The Helldivers Archive! I merely converted the files to STL and fixed some errors for printing. These files may contain errors, and require…

Loki Helmet

It is necessary to print with supports

Iron Man wearable helmet Mark 42 Mk 42

This is a fully printable, full size Iron Man Mark 42 helmet! You can read my many updates down below on how I got to this point. Print out the parts, orient them as you wish, paint them and wear it! The photos I posted are of a scaled…