Wyniki wyszukiwania: ender3v3

sharingan-ender3v3se

Need glue, red pen and black pen

Ender3v3SE Screen Mount - RaspberryPi4b Octoprint

Version 2 now available: https://www.printables.com/model/1219990-ender3v3se-screen-and-octopi-mount I have left this up so that the basic screen or printer mounts can be used still.…

Ender3v3 カバー

フィラメント交換時の作業軽減

Ender3v3 se filament runout sensor mount for two inline mounting holes

You will need 4 M3 screws , one longer than 13mm , another longer than 17mm and two longer than 20mm ( can use 4 M3 by 20mm screw too ) and two M3 nuts. The sensor mount mounts on top of the print head wire harness holder by replacing the…

Dial indicator mount for Ender3v3

I wanted to use a dial indicator to level the bed manually, and I couldn't find one for this model. I hope it helps Cheers! Category: Hand Tools

Spool holder rod clip (Ender3V3 SE/KE)

This is a clip to prevent the filament spool from slipping off the rod, made for the Ender 3 V3 SE and KE spool rod. This happen cause of the spool weight and the holder bending. The spool slip off and it is more dificult to turn the spool.

Ender3v3 ke/se Sensor Mount

Я спробував кілька тримачів філаментних датчиків, але жоден мені не сподобався. Деякі з них змусили датчик створити положення, де він додав додатковий опір нитці, тому я змоделював свою власну версію. Він схожий на той, що йде в…

Ender3V3 Z-Axis Nebula Camera internal holder

I made this nebula camera holder for my Ender-3 V3, because other holders I found are incompatible moving with z-axis and the side spool holder. Mount photos with test pieces Replaced original M3 screws with longer ones (10mm)

Ender3V3

TeflonTubeStopper

Easy Rotate Knob creality ender3v3 se

This button is designed as a cover for the main button of a 3D printer. It features a marking on the surface to indicate the direction of rotation: turning it to the right increases the height, while turning it to the left decreases the…

Ender3v3SE Screen and Octopi mount

This is a redesign of my previous version. Base screen mount, and printer mount files are available on the original model page, to design your own mounts. Improvements Hole now present within the mount for the ribbon cable to go through,…

Ender3V3 Plus Nebula Camera mount with CoPrint support

5/7/25 Update - After fitting a new X carriage I had to adjust the mount slightly. Now sits further back and higher up Nebula Camera mount for the Ender3V3 Plus, should work on the regular V3 assuming it has the runout sensor. I am not…

Updated CoPrint Ender3V3 carriage and backing plate

Loved the original model so I remixed it to add heated inserts to the carriage and backing plate. There wasn't enough meat around the belt mount to put inserts so these remain as threaded into the plastic. You will also need the locking…

Ender3V3SE Display Mount

Print setting for screenmountreplacement layer height: 0.2mm buttom surface pattern: Archimedean Chords infill: 12% infill: adaptive cubic Print 2x LCD riser stand and insert them in the screenmountreplacement slots Thanks to…

ADXL345 to Ender3V3SE kit

It's like putting spoiler on a prius. Be aware of the fan holder position relative to the bed of the printer, so it won't scrape it when prints. This is done to lighten structure of toolhead to achieve a little more speed and stability +…

Ender3V3 SE/KE light mod

This is a custom fixture designed for my LED lamp setup . It is print-optimized, requiring little to no support. The LED panel measures 38 mm in width and 1.2 mm in thickness (refer to the attached image for details). The model was…

Ender3v3 se filament runout sensor mount for two inline mounting holes

You will need 4 M3 screws , one longer than 13mm , another longer than 17mm and two longer than 20mm ( can use 4 M3 by 20mm screw too ) and two M3 nuts. The sensor mount mounts on top of the print head wire harness holder by replacing the…

Dial indicator mount for Ender3v3

I wanted to use a dial indicator to level the bed manually, and I couldn't find one for this model. I hope it helps Cheers! Category: Hand Tools

ender3v3se filament guide

pen holder ender3v3se

Use this link to get the gcode Free Image to G-code Converter | PNG JPG to Pen Plotter G-code Tool Just use gluetape to glue it on itll hold its for 10 mm pens . if you need another size just request.

ender3v3se crtouch back replacment without linear rails

...

New LightBar holder Ender3v3 no support

LightBar holder Ender3v3 no support no support - holds generic LED bar on spool holder for creality ender3 all versions. use any generic led usb light bar. use small zip ties or twist ties to fasten to light bar.

Ender3V3_Manilla-Flechas

Manilla sobre puesta para monitor de impresora ender3V3

Ender3V3KE CR ADXL quick mount without extra screws

Ender3V3KE CR ADXL quick mount without extra screws, just using the 6 screws that coming with the sensor.

Ender3v3 KE G-Sensor brackets backsite

Eine G-Sensor Halterung um das Kabel sauber nach hinten wegzuführen. Geeignet für meine Rooftop Kamerahalterung . Nicht geeignet für hängende Halterungen. Ich werde eine Halterung entwerfen die dann passt. Link wird hier nachgereicht.…

Ender3V3KE CR ADXL quick mount without extra screws - Extended

I have dual 5015s on my KE and the standard model would not fit. I didn't want to remove the fans as it would skew the results with the variation in weight. It's not great for the placement as I know it should be as close to the nozzle as…

Ender3v3 KE G-Sensor brackets backsite V2

Diese Halterung für den G-Sensor ist perfekt geeignet für meine Nebula Kamera Halterungen. *** This bracket for the G-sensor is perfect for my Nebula camera brackets. → Nebula Camera Z Axis Mount Ender 3 V3 SE / KE / + adidas → Nebula…

Ender3V3KE V-Wheel Camera Mount

This camera mount can be used on the right or left side of the Ender3V3KE. It mounts to the V Wheel cover and uses the factory screws. There is also a plain cover if you want to add a little color to your printer or if you want the sides…

Ender3v3 KE Nebula Pad Spacer Plate with Cable Routing

Requires 2x m4x16 screws – 6mm longer than the originals. This works well with my nebula camera mount – keep the USB cable tidy.

Ender3v3 KE Runout Sensor Relocation Cable Clips

Keeps your cable tidy after relocating your runout sensor. I use 8 clips for my printer.

Ender3V3 Nebulacam bracket

I purchased a Nebula camera to increase the usability of my Ender3v3 printer. I looked for a printer bracket on cloud, but couldn't find a suitable model. So I did a new model. At first, I was in a hurry and tried to install it in a…

Gantry leveler for Ender3V3SE/Ke

I really needed a way to level the gantry of this bed slinger horizontal with the base so i could level than the build plate versus the gantry: Not a forward task with this extruded base and custom extrusions so i started in Fusion 360.…