Liczymy pasujące modele…
I've taken Jerry's gridfinity holder for ES15+iFixit driver and some bits, and changed the base to not use magnets, as I prefer Clickfinity magnetless bases anyway. STEP file is also provided for anyone wishing to do further tinkering…
A remix of https://www.printables.com/model/374789-gridfinity-collection-solid-bins-for-customization (Gridfinity_1x3_14mm_solid_Magnets.step) This was designed to fit inside an IKEA Alex drawer. The height of the stand + tool is ~12.2cm
UPDATE 24/01/2026 Created an high capacity vane bit-holder as someone suggested with or without magnets from Alvomane design and a larger vane and vane-lid. 18/08/2025 I fixed in Fusion 360 the small gap that was left from the tolerance…
Miniware ES15 Stand for Skådis or Desktop Use This 3D‑printed stand is designed to securely hold the Miniware ES15 electric screwdriver , offering both Skådis panel mounting and desktop use thanks to its removable base. The design…
after i released my first HSW-holder for the ES15 , I got a few messages from people who said it broke for them - it didn't for me until I printed one from PETG HF, so instead of buying more filament, I decided to design a tougher one -…
Grip piece to reduce the chance that screwdriver will slip in hand while impact driving the screws. Print instructions: Filament: 40D TPU (I used Fiberlogy MattFlex 40D) Layer height: 0,1mm (modify layer height of 0,2 Structural profile;…
This is a sleeve style protective case for your ES15 screwdriver. The bits and the ES15 are held in the case with friction. First do a test print of just the end portion, to test the fit of the bits and the screwdriver into the case. This…
Gridfinity box 2x4x4.5U for Miniware ES15 screwdriver Accommodates 15 standard 28mm bits and 10 long 40mm bits plus 2 bins to store unused ones. Tall just enough so bits doesn't interfere with box stacked on top. Two 4.5U stacks exactly…
A remix of https://www.printables.com/model/374789-gridfinity-collection-solid-bins-for-customization (Gridfinity_1x3_14mm_solid_Magnets.step) This was designed to fit inside an IKEA Alex drawer. The height of the stand + tool is ~12.2cm
There are two versions here, one slightly tighter fit on the hex bits. Use the nose test print to select which one works best with your printer and filament. The covertex wheel and belt clip can be purchased from multiple online shops…
Remixed from @Alvomane's bit holder, with expanded bit slots for easier access and removal.
I liked the original version made by @51m0, but wanted a more secure clasp. I liked the clasp and hinge from the “Pill Box 2.0”, so I decided to try adding that in. Please get the bit holders from…
This is an improved iFixit Mako bits insert for one driver and a miniware ES15 screwdriver Changed right recess to hold a miniware ES15 electric screwdriver Changed hexagonal holes to round holes for easier insertion Angled the bit holes…
I want to make a case for my miniware ES15 i came with this simple design with minimum hardwares and its can be printed with 180mm bed. there is alot of options there ! but i have 3d printer to make it and same time to be stackable with…
A remix of the #Gridfinity Ifixit screwdriver/bit tray because you don't have the exact same twisty deal as that guy from the video.…
While technically a remix I've re-made the holder from Zach's original template using MachoThick's ES15 model and bit holder design. I've added the iFixit screwdriver sketch from Zach's own models. This will fit standard 4mm bits like the…
UPDATE 24/01/2026 Created an high capacity vane bit-holder as someone suggested with or without magnets from Alvomane design and a larger vane and vane-lid. 18/08/2025 I fixed in Fusion 360 the small gap that was left from the tolerance…
Recently I bought a Miniware ES15 electric screwdriver and decided it'd be really convenient to carry it around with my iFixit manta set because they use the same size bits. I really like the case the iFixit Mako comes with so I modeled…
a simple mod of a stand for the ES15 to make It easier to print and more usable by removing the bearing turn table and wobbles
A ruggedized box for the ES15 screwdriver meant for inserts made by 51M0 . This remix was requested for by another user. The box's interior dimensions are the same as the insert but with a +0.2mm tolerance. Latches and hinges are made to…
This is a re-made based on Zack's original template and has been improved with the following modifications, taking into account MachoThick's design : A reserved charging hole for ES15. An added Hakko FX-888D soldering iron tip hole…
Been thinking of making a handle for this driver, so I built a model of the screwdriver. Pretty accurate, but couldn't figure a good way to finish the button, so it's been left flat.
I like my ES15, but I found the bit set it came with was sorely lacking. So I decided to combine it with my iFixit Mako bit set. This case adds holders for all of the bits, it also has a small driver handle that can have the ¼" adapter…
These are two remixes of the bit holder insert for the Miniware ES15 cases from 3DP-MAMSIH , 51m0 and PjotrStrog . The bit holder allows 55 bits to be accommodated in the case. The version with the magnetic/finger recesses holds 47 bits.…
This stand is designed for an electric MiniWare ES15 screw driver. the inner hole is long enough to hold the ES15 with an extra bit inserted the outer rings take 30 bits in total (4mm type) the fit for the bits isn't too tight so they're…
This is a remix of the excellent design of a parametric rugged case by Whity. It is modified to securely store and transport a Miniware ES15 screwdriver together with a lot of 4mm hex bits packed into tubes, which are delivered in a kit…
Remixed top cover to have sign/text with second color (need MMU2 or other multicolor)
Theres a compliant joint in the hole which grabs the screwdriver when you push it into the hole. It's stong enough to hold the weight of the screwdriver, but still pretty easy to get it out. Meant to be integrated into another design.…
I've printed mine in PLA-CF, PLA & PETG should work just as fine. this will need Support, for your convenience the 3mf file is setup for a Bambulab printer with AMS using PLA-CF + Support for PLA as interface. Update: I released a more…
Miniware ES15 case bit holder with looser fit, 6mm magnet holes, and 32 holes
A compact, upright, Gridfinity holder for the ES15 screwdriver and 30 4mm bits. There are two models, one with a base and one without (I often print my bases separately and glue them on). The holder is 4U high in order to allow storage…
Hello Everyone I am sharing a stand for an electric screwdriver from MiniWare ES15. It should be printed in the position shown in the photo in the gallery. When you complete the project, please share a photo and a comment. Thank you and…
I've always thought that my ES15S screwdriver looked like a Lightsaber. I added these parts to complete the look! Guard module was omitted since it would get in the way of typical screwdriver operation. OpenSCAD files are available for…
Einsatz für den Akkuschrauber ES15 von MINIWARE. Passend in Stanley Sortierboxfach groß.
This is my version of a ES15 Driver and Bit holder for the Honeycomb Storage Wall system. Your default bits are always easy to get and all of the other normally never used additional bit you get can be stored in a small drawer. Print it…
Modified the original hole spacing to be used with Multiboard ( https://www.multiboard.io ). The drawer remains unchanged. You must use one of the following Multiboard M3 Heatset Insert Snaps (print 2 of them):…
Miniware ES15 Stand for Skådis or Desktop Use This 3D‑printed stand is designed to securely hold the Miniware ES15 electric screwdriver , offering both Skådis panel mounting and desktop use thanks to its removable base. The design…
A lid with the ES15S text for the Miniware ES15 rugged case. The font used for this lid and the TS101 lid is the Major Snafu Font.
Designed to work with a SKADIS universal hook: https://www.printables.com/model/926529-ikea-skadis-universal-tool-hook-peg-step-file-incu Print in the supplied orientation
The iFixit Mako Set bits are perfect, but I also wanted my Miniware ES15 electric screwdriver on hand. This is a remix inspired by the amazing @farmerde_905596 design. The lid didn’t fit, so I printed a TPU spacer, added magnets, and…
I printed it with PETG but PLA should also be fine. Support is required for the top cover. If you found it useful you can Buy me a Coffee!
