P
Printables
ESP01/01S Relay Module Case
I needed case for the wifi garage door opener I made from an ESP-01 and a relay module. Case has slots so you can mount it to a cable or other item with cable strapping or cable ties. No support needed.
Wyniki wyszukiwania: esp01
Liczymy pasujące modele…
P
Printables
Dual Channel ESP01 Relay Module Enclosure
I want to thank Mark_Alpha for his model 2x Dual Channel ESP01 Relay Module Enclosure , which is used for 2 relay modules, but I only needed a box for one module and also the screws for Mark's original model are too long, so I remixed…
P
Printables
ESP01 ESP01S ESP8266 2 channel relay board case
Box for a 2 channel ESP-01(S) / ESP8266 based relay board such as https://www.aliexpress.com/item/1005004533412591.html http://www.chinalctech.com/xwzx/24.html Requires the great https://github.com/mrWheel/YAPP_Box Note that this relay…
P
Printables
Printer monitor for octoprint ESP01 mini case
Soporte para pantalla oled y esp8266 01 para printer monitor. Printer monitor es un programa que te enseña la información en tiempo real sobre la impresión en una pantalla oled. Cuando la impresora no está imprimiendo, puede apagarse la…
P
Printables
PushBotton MQTT ESP01s Alarm
I build this Device so my daughter could send “cannot sleep” messages to our Phones. DC-DC Modul: https://shorturl.at/Lm2Zz Aliexpress The ESP is flashed with Tasmota: https://templates.blakadder.com/ESP-01S.html Integrated “Nightlight”…
P
Printables
ESP01s NeoPixel Ring
Cap can be printed in Vase Mode. I removed the LED (Resistor) on the Neopixel Board (way to bright). The one on the ESP is aligned with one RGP LED Ring. So the Status (on/off) of the ESP can also (not as Bright) been seen in one Segment…
P
Printables
ESP01S Relay Board Case /w clipping lid
Can be printed without any changes, original is in PLA.
P
Printables
CH340C ESP01 Two Socket USB Programmer Case with Cap
CH340C ESP01 Two Socket USB Programmer Case with Caps. Resized the case to accommodate a modified lever from ESP32-WROOM-32 (USB-C) Box with Lid model for the reset button. Added thickness and three versions of an optional protective cap…
P
Printables
ESP01(S) Wifi+Relay board box
A small box for an ESP01S with relay module with the power supply, button from the computer mouse and cable connector
P
Printables
Right Side with ESP01 Wifi module
Based on https://www.printables.com/model/74330-tft35-e3-v3-case Provides an additional slot for the ESP01S wifi module if you want to use it in the TFT. I use it this way because it displays the IP address on the TFT this way, and at the…
P
Printables
Case for Relay + ESP01
A simple case for a relay meant to be used with a device that accepts also 5v (in my case, a water pump). This case is designed in a way that the input and output are normal USB cables, which will be shared between the relay and the…
P
Printables
ESP01/01S Relay Module Case
I needed case for the wifi garage door opener I made from an ESP-01 and a relay module. Case has slots so you can mount it to a cable or other item with cable strapping or cable ties. No support needed.
P
Printables
Dual Channel ESP01 Relay Module Enclosure
I want to thank Mark_Alpha for his model 2x Dual Channel ESP01 Relay Module Enclosure , which is used for 2 relay modules, but I only needed a box for one module and also the screws for Mark's original model are too long, so I remixed…
P
Printables
TFT35 E3 case remixed for ESP01S wifi daughterboard
This is just the right hand side part, you will need the case body and left hand side from the original model, and the clip, if desired.
P
Printables
ESP01 ESP01S ESP8266 2 channel relay board case
Box for a 2 channel ESP-01(S) / ESP8266 based relay board such as https://www.aliexpress.com/item/1005004533412591.html http://www.chinalctech.com/xwzx/24.html Requires the great https://github.com/mrWheel/YAPP_Box Note that this relay…
P
Printables
Editing ESP01 Thermometer Stand (2022)
Case for ESP01 and DHT11 and Adapter Board an Micro USB Power adapter The docx file contains a ZIP File with KiCad files to order the PCB. Power and DTH11 Adapter:…
P
Printables
CH340 USB ESP01 programmer with switch
Adapter: https://de.aliexpress.com/item/32971337222.html Category: Electronics
P
Printables
ESP01 Thermometer Stand (2021)
Next level: https://www.thingiverse.com/thing:5320903 Case for ESP01 and DHT11 and Adapter Borard an Micro USB Power adapter Power and DTH11 Adapter: https://de.aliexpress.com/item/4000035981362.html?spm=a2g0o.9042311.0.0.7b674c4d2Hmxcf…
P
Printables
![Actually accurate Esp8266 (Esp01s) Temperature sensor using ds18b20 [Tasmota/EspHome]](https://media.printables.com/media/prints/279448/images/5649478_1530bba2-be3c-4b75-83c3-65522573e3dc_282046f2-afd2-424a-bf0c-cdabdbfa6927/screenshot-2024-01-13-alle-213022.png)
Actually accurate Esp8266 (Esp01s) Temperature sensor using ds18b20 [Tasmota/EspHome]
After multiple prototype where I put the sensor and the Esp in the same box, I found out that even with many walls between them the heat from the voltage regulator would make the sensor read 0,5 to 2 °C more than a sensor in the open air.…
P
Printables
ESP01 Box / ESP01 Gehäuse
Gehäuse für den ESP01, ich brauchte das Gehäuse um den ESP01 vom WIFI Lesekopf von Hichi https://www.ebay.de/itm/314152997777?hash=item4924fa5391:g:a~MAAOSwk3xhfcKN aus dem Zählerschrank zu montieren. Die Box hat eine Kabelausführung mit…
P
Printables
ESP01 programmer/breakout
This is an enclosure for an ESP01 programmer by AzDelivery (and similar, see picture). Additionaly it is a breakout board for the pins and adds buttons for easy usage. I decided to upload my ESP01 programmer, because it is so handy and…
P
Printables
Case for programmer ESP01S
The case is designed so that the module is not accidentally shorted by something that lies on the table and conducts electricity. A very useful thing. Please feel free to call. I will be pleased with your good assessment. Link to device…
P
Printables
ESP01S module case
The case of one of the smallest controllers, which can easily be lost among office papers.
P
Printables
Ender 3 Pro TFT35 enclosure (ESP01 supported)
BigTreeTech TFT 35 E3 V3.x full enclosure (ESP-01 supported) Since I didn't find any good and easy-to-print enclosure for the BTT TFT35 E3 V3.x, I challenged myself to make one from scratch. The Ender 3 pro metal sheet screen support is…
P
Printables
DTZ541 IR head magnet mount ESP01
The DTZ541 is a common meter in Germany that provides an infrared transceiver to read information off the reader, e.g., for integration with Home Assistant. There are several IR heads available that can be bought preassembled, often…
P
Printables
ESP01(S) Wifi+Relay board housing
A small box for an ESP01S with relay module. I used it for making my doorbell smart following Francks tutorial: https://frenck.dev/diy-smart-doorbell-for-just-2-dollar/ Fusion 360 file is included. Print instructions I only added supports…
P
Printables
ESP01 rgb pcb shield case
Case for rgb pcb board to use with ESP01(S) and WLED. A modified version is also available has a 20mm pipe adaptor.
P
Printables
DINrail mount for ESP01 relais board
printing tipps: Please print in PETG or ABS, since PLA may not be stable enough in higher temperatures which may occur adjacent to other electrical devices. transparent material for the lid (top) will let the LEDs shine through.…
P
Printables
ESP8266 ESP01 - mini case / Prusa Mini external wifi case
Mini case for a ESP8266 ESP01. I used it together with this: https://www.printables.com/model/447136-prusa-mini-buddy-board-cover-with-hole-for-externa to have my wifi module outside of my Prusa mini → This improved my wifi connection a…
P
Printables
ESP01 + DHT modul case
ESP01 + DHT modul case Print instructions Category: DIY Summary ESP01 + DHT modul case Print Settings Printer Brand: Creality Printer: Ender 3 Pro </div> Rafts: No Supports: Yes </div> Resolution: 0.16 Infill: 25% </div> Filament:…
P
Printables
TFT35 ESP01 box
This very simple box allows you to cover the Esp01 Wifi module on the TFT35 screen. Print instructions Category: 3D Printer Accessories Summary This very simple box allows you to cover the Esp01 Wifi module on the TFT35 screen. Print…
P
Printables
Gridfinity ESP01//ESP8266 Holder Stackable
Simple stackable gridfinity bin for ESP01//ESP8266 boards
P
Printables
Printer monitor for octoprint ESP01 mini case
Soporte para pantalla oled y esp8266 01 para printer monitor. Printer monitor es un programa que te enseña la información en tiempo real sobre la impresión en una pantalla oled. Cuando la impresora no está imprimiendo, puede apagarse la…
P
Printables
ESP01 Wifi Relay Housing
ESP-01s & ESP01 Relay V4.0 Housing DIY WIFI AC Relay (Flash your ESP module using EspHome Webtools online flasher) Print tips: PETG (Preferable) 0.2 Layer height No supports Bed 70 Nozzle 235 Components: 3D printed ESP01_Relay_Housing 3D…
P
Printables
ESP01 DHT Temperature Sensor Case
It's a small case/box for e.g. a DHT22 or DHT11 sensor. In a seperated compartment I placed a ESP01/DHT board with a small psu. There is a small area where you can tie wrap the incoming power cable. You get one of those ESP01(S) DHT…
P
Printables
2x Dual Channel ESP01 Relay Module Enclosure
Simple enclosure for two very popular Dual-Channel relay modules that I made for myself.. Up to two modules can be installed. The enclosure was designed to be mounted to the walls of bigger box. Cutouts give the access to the fixing…
P
Printables
The Ultimate 3D printed case for LED Ring from AliExpress and ESP01 with shield
Check video on youtube: I printed the diffuser in vase mode, since I could not print it without breaking, I made a little edge for strength. (which does not bother me much) Then assembled and loaded the ESP-01 with programmer (or loosely…
P
Printables
Box for ESP01S relay board
A box for your ESP01 relay module. Has holes for all the cables and the reset button. Includes a snap fit cover. Everything fits very snuggly, so there's a tool hole at the bottom so that you can remove the board from the box if needed.
P
Printables
esp01s ws2812 wireless led ring enclosure
Parts used: 1x ws2812 led ring with 24 units 1x esp01s 1x ws2812 esp01s to ws2812 adaptor unit Firmware: ESPHOME Configure the led ring with neopixelbus Here is an example that works:(Only the light section of esphome configuration file)…