15 modeli
This project is an elegant geared-drive, bowden feed extruder, based on tempo502's B'struder. It combines the idler arm from there for PC4-M6 pneumatic/bowden fittings, with your basic Wade gears. With a suitably-modified idler arm, it…
The eye socket/lid/lashes mount to the extruder stepper motor with 4 6x3mm neodymium magnets. The eyeball itself mounts to the stepper with a stack of 8x3mm neodymium magnets. No need for supports, print as oriented in the STL.
I designed this for the Skelestruder. Requires: 2x m3 square nuts 2x m3 headless screws Recommended to print slow and at low layer height. Concentric infill, 3 perimeters. Set extruder steps/mm to 1120 with M92 E1120 then M500 to persist…
Just got a little frustrated of the great skelestruder and this wonderful idea of the IR-Sensorfix. But somehow after breaking the first filamentsensor. Printing lots of versions never got the lever to fit into the sensor and mounting it…
This is a modification of the Skelestruder for Prusa i3 mk2 which I made because I have that printer and wanted to mount that extruder on it. STEP files for all models provided if you want to modify this further. Changes: 1) I made the x…
I had no heat set nuts and a lot of PC4-M6 passthrough connectors. Hence, this modified lid was born. It has the added bonus of allowing the PTFE to pass all the way to just above the gears. Print as per skelestruder print guide. You will…
Multicolor part, possible with prusaslicer and 1 extruder Layer 0.2mm 2 layer of color magnet 8x3
THIS IS NOT FOR PRINTERS WITH PRUSA FIRMWARE. I'M USING THIS ON A DUET. I made this because I wanted a filament sensor and a microswitch seemed a sufficient (and much cheaper) substitute for the Prusa IR sensor. I used this model while…
Cover for extruder and blower fan: Extruder cover eyes rotate :) Looks funny hue hue. Print instructions For the blower fan just add two color changes. For the Extruder cover add a single color change and later on a pause to insert a…
My original 56T pulley developed a bit of play after long term use. This remix merges the two halves together into a single piece to eliminate the possibility of developing backlash over time. This requires an M3x6 set screw in place of…
Skelestruder bltouch mount rack I wanted to use the Skelestruder V1 as my extruder, but since I have a custom built printer and a BLTouch, I needed to modify the pinda rack to fit a BLTouch. It's using the pinda rack from the original…
Jig and support to help with cutting to length and grinding flats on the 5mm rod used in the Skelestruder do check the depth of the flats and location outside the guide flat widths are 5 mm (instructions say flat width should be 4mm or…
Replacement for SP_Prack. Supports EcageS so it doesn't sag. Obviously the probe adjustment feature doesn't work anymore so you need to adjust the probe the way you would do it on the stock MK3/MK2 extruder. Use SP_Prack_antisag for Prusa…
Just got a little frustrated of the great skelestruder and this wonderful idea of the IR-Sensorfix. But somehow after breaking the first filamentsensor. Printing lots of versions never got the lever to fit into the sensor and mounting it…
Love this small 25mm fan I bought on ebay so I created a mount for it. Fan was called Super Mini DC 12V 2Pin 25MM 2510 Cooller Brushless Cooling Fan 2 wrie * on ebay at the time.* Category: 3D Printer Parts
