Liczymy pasujące modele…
Smoothed and fancied remix of this light switch lock. https://www.thingiverse.com/thing:243827 Sorry about the bad quality of my own print, I'm still calibrating it in a new environment. Lay flat and use tree support for the best results…
Fancy bracket for wifi AP or whatever would fit. To attach to the wall. The beams look like they are coming out of the wall due to a collapse. Print Settings Printer Brand: Creality Printer: CR-6 SE **Rafts:** No Supports: Yes…
Customization This model can be customized in the OpenSCAD customizer tab. Open the CAD file in OpenSCAD and unhide the customizer window. It can easily be modified to fit various sized shafts and to have different dimensions. You can…
To print this model, enable supports on build plate only, use 0.15 mm layer height, and I used a 0.4 mm nozzle. The picture is made in PETG, but PLA will work fine.
Fly Frogs are a line of printable, collectible, modular figures. Designed for FDM printing on single and multicolor printers. Works with other designs as one modular system with interchangeable parts. Includes 3mf, STL, and instructions.…
Vase - or a flower pot - that can be printed in either direction. There's a hole in the middle for a cable+lamp or to allow the overflow of water. IMPORTANT: Has to be printed in “VASE” mode! Otherwise it'll be a solid block with a tiny…
Flat bottom for easy printing! Brims + Supports recommended. Check out my whole cauldron collection! Happy Halloween! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld…
This is a lovely model of a very fancy giraffe. There are two models included, one a coloured 3mf for bambu studio and the other just an stl. I hope you enjoy this funny little guy and if you do, comment some other giraffe designs you…
UPDATED 7/15/2026: Now on V3, reduced outer wall height by another 0.2mm as one person who printed V2 had the knob hit the case before the button press registered. I also drew up a small .6mm tall shim so if you fit the knob and find it…
My first Blender/3D/3Dprint model I've made without a tutorial. The non-manifold error has now been fixed.
Custom made Cyberpunk inspired Figure of a Character
Cover for used sticky roller. Used sticky roller can be at hand and looks perfect...
Designed for single filament printers. Visit our website: https://StarLabs3D.com Our YouTube: https://www.youtube.com/@StarLabs3D Help support our design work by visiting our referral links: Upland referral (virtual property trading…
Designed for single filament printers. Visit our website: https://StarLabs3D.com Our YouTube: https://www.youtube.com/@StarLabs3D Help support our design work by visiting our referral links: Upland referral (virtual property trading…
The original design height is 1.1 meters , making it suitable for large-format prints, decorative installations, or scaled-down prints depending on your printer size. The model scales very well, so you can easily print smaller versions…
This fancy-looking irregularly-twisted ring with an inner diameter of about 35 mm and an outer diameter of about 45 mm is nice as a jewelry accessory and can for example be hanged to a necklace. Printing recommendations Layer height: As…
This is just a replacement buttplate for the vulture/smiley fancy stock with a QD attach point at the bottom. There are anti-rotation posts inside the cup to help prevent twisting. Use the same print settings as the rest of the stock and…
Simple dual watch holder for non-Apple watches. It consists of three interconnected parts, with the base requiring glue. If anyone has a better design, please let me know.
Update 10/30/2024: *Now with RPM Control!* Instead of using the sketchy (but free) electronics down below, you can use this rectifier and voltage controller combo unit I found on AliExpress:…
I was playing around in Blender and came up with this pencil holder because I sorely needed one :D It's easy to print, and even easy to miniaturize if you want to see how it will come out before printing the real deal. Initially, I…
Smoothed and fancied remix of this light switch lock. https://www.thingiverse.com/thing:243827 Sorry about the bad quality of my own print, I'm still calibrating it in a new environment. Lay flat and use tree support for the best results…
To keep the batteries for my flashlight organized i designed this battery holder. Always wanted a compact way of handling the batteries. You can slide in the batteries from the side. I strongly recommend to print with organic support as…
For storage of small items. Place this on your coffee table or such.
dog house with crevices, dog name, bowl, fence there are pins for the mounting and a guide to install all the fence at the same height stacc_n (from 1 to 8) are the fences base 1 and base 2 need to be assembled, also the house
Summary 7/6/2024 Update: Added STL with side antenna hole. Guess I will need to do some more updates as I just saw this on youtube.... Just wanted a fancy heltec box for the desk or shelf. If you want you can put a slim battery pack in…
Redesigned lid slide mount for K1 Max. Raised back and spouted lip for easy insertion. Rounded edges for a classy look. You will need slightly longer screws, that's it!
Fancy Nut with large base and manual grip for handling without tool. Print without support. Strongest at 100% infill.
A Fancy Looking Phone holder that I designed on Onshape for fun. Printed on a Longer LK5 PRO w/ Glass Bed. Pictures are Overture PLA (black) and OVV3D PLA (Oak Wood). Uploaded Cura slicer picture to identify supports and blocker. The wood…
Fancy bracket for wifi AP or whatever would fit. To attach to the wall. The beams look like they are coming out of the wall due to a collapse. Print Settings Printer Brand: Creality Printer: CR-6 SE **Rafts:** No Supports: Yes…
print with organic / tree supports, and use lowwer speeds
This is a small shelf I designed with a small “fancy” detail for mounting an Acurite Temp/Humidity sensor on the wall with a medium Command strip that has been slightly cut down in length. The x3 version was for holding 1 Accurite sensor,…
I remixed this thing to be able to print it on my MP select mini. It is split into 4 parts, each with 2 2mm diameter holes. I use sections of 1.75mm filament about 15mm long as alignment pins, and a bit of superglue. How I Designed This I…
The Czur Fancy USB camera can use a heavier base. I've designed a container for ½" heavy duty washers (35 mm). I used 10 washers and three M3 10 mm screws. Printed in PLA using Sovol 06+ 0.8 mm nozzle at 0.4 mm LH.
This sword has a very interesting handle pattern, and the guard is merged with the blade. Printing Use organic supports and print at 5.5 inches minimum for miniature detail or use larger increments if you see it necessary. Lore This sword…
Made the hook length deeper for extra fancy tophats, cosplay hats, etc. The base and lip have the same dimensions so it will still fit the command strip correctly.
Tiny Fancy ToothBrush Caddy Here is a small and simple functional furniture item for you. A fancy and space-saving toothbrush holder. Infact the Tiny Fancy ToothBrush Caddy is small and fits perfectly in small bathrooms with little space.…
Uses 6x3mm magnets glued in for door latching, found here: https://www.amazon.co.uk/gp/product/B07MT9P2K9/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 and hinges with M2x10mm screws, found here:…
use a DIN9021 washer to spread the load. (15mm maximum) make sure the bottom 2mm is solid, so the mount can be tensioned without destroying any infill. for best fit , set your slicing tolerance to exclusive (at least in Cura)
Simple 1x1 Gridfinity Bin you could use for Q-tips or anything else….
Its a tissue box holder, with tabs on the inside to help grip the box. Its upside down to print well.
No supports needed for the first one. I put a more fancy one's file on too, add supports for that one's fancy outside.
Requires a tiny amount of supports for the rings and the ends. Scalable dungeon accessory. Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This is a fully 3D printable ergonomic footrest. It's not a hard print, but it's long and has a few caveats: -You'll need to print it from ABS, ASA, PETG or at least PLA plus\pro -It has one quite aggressive overhang, so make sure that…
Just a cup with a divider, small to fit my desk, could be scaled up.
This is a Remix of Cassette Rack - 10 Tapes, under 200mm. Removed edges between cassettes just because i like it more this way.
Playing around with some different floor treatments for the openlock floor sections. A lot of the tile I see out there are for dungeons, and caves, and the like. Which makes sense. But what if you want to do a fancier prison? or a manor…
From reddit question: https://www.reddit.com/r/Fusion360/comments/1if4kfq/how_would_design_something_like_this_in_fusion/ I made the center form elliptic and added a bit more curviness. The model is fully parameterized so you can adjust…
this is a lego technic frame i designed to easily fit a locking differential in for lego technic, which is whats in the (kinda bad) pictures, but it can be used in many other ways I'm sure. can be printed in filament or resin
The model contains a internal structure as you can see in the second image. I chose to do this to be able to print this without any supports that would have been otherwise needed on the inside. If you want to make the vase heavier you…
The model contains a internal structure as you can see in the second image. I chose to do this to be able to print this without any supports that would have been otherwise needed on the inside. If you want to make the vase heavier you…
Fancy duck with colors for MMU! Recommended settings: organic supports and 20% infill.
Most of the credit for these designs should go to ZackFreedman and Inaudable from Thangs. Thank you to you both for this fancy Hextraction board! This remix was started with just making a custom goal with (in my opinion) clearer symbols.…
I just added a 8mm ID, 4mm thick, 2.5mm tall eyelet to Donutcat's Fancy AirUps Inflatables Cap so it can be tied down with paracord or whatever rope ya want step and stl included for your convenience Thanks donutcat!
A fun project I spent a lot of time tuning. I'm a metal worker so this was a challenge for me to design the smooth shapes. The Design Goals: An offset knock bar Professional look Low overall price Printable After many revisions this is my…
Printing Instructions: Print standing upright, with tree supports enabled for the lower overhang. All other overhangs should not need supports as they are angled 45 degrees or greater. Mounting and Orientation: I mounted mine using two…
Wanted to find a neat way to hold my “big” chef knives instead of creating a huge box for them. printed in Sunlu PLA +, 0.4 nozzle, 4 walls, 2 top and bottom layers.
Customization This model can be customized in the OpenSCAD customizer tab. Open the CAD file in OpenSCAD and unhide the customizer window. It can easily be modified to fit various sized shafts and to have different dimensions. You can…
Can be printed without support and scaled to fit a variety of flowers. Inside diameter is 120mm on top and 100mm at the bottom roughtly, internal height is 110mm.
To print this model, enable supports on build plate only, use 0.15 mm layer height, and I used a 0.4 mm nozzle. The picture is made in PETG, but PLA will work fine.
Fly Frogs are a line of printable, collectible, modular figures. Designed for FDM printing on single and multicolor printers. Works with other designs as one modular system with interchangeable parts. Includes 3mf, STL, and instructions.…
This stylish and functional bowl is perfect for storing garlic, onions, or shallots. The open lattice design ensures optimal airflow, helping to keep your vegetables fresh and mold-free. ✅ No supports needed
Designed this treasure chest for a Shapr3d Tutorial. Enjoy! Category: Props
https://makerworld.com/en/makerlab/imageTo3d?from=makerlab / for the main potato guy I used this AI.
It's a stock for smiley. Based off some fancy shotgun stock. Looks expensive or something. “is there a pcar in your stock?” Uses 3 20mm and 4 35mm #6 screws (the same ones used for the rest of the blaster). To assemble first screw…
A simple connector that combines two bins. I provided a STEP file in case you need to adjust the tolerances at all. The pegs are set for .2 tolerance. I printed at 100% infill with PETG
Welcome to my miniature fancy chalkboard. I was looking for a way to help my girlfriend label her different soap scents and colors for when she would take her stand to craft shows. I looked online and couldn't find anything that was cute…
How to model this type of design on a flower pot shape. CAD file provided to remix and/or see how I created this. See: https://www.reddit.com/r/Fusion360/comments/1l3dskr/how_would_you_approach_this/
I gave my fancy flowerpot a twist and added a beaded rim. See: https://www.reddit.com/r/Fusion360/comments/1l3dskr/how_would_you_approach_this/
This print is designed to mount a camera on the end of a pressure washer wand. For those of you wondering, I use a 20 foot pressure washer extension pole to clean the roof gutters. This allows a camera to be mounted on the same pole for…
Howdy, wonderful people! Some might say that VHS tapes are distant enough in the past now to be cool again, but I say they never stopped being cool to begin with! While those magnetic tapes may have faded from relevance for media…
You can do what ever colors you want. The rounded tip is the smoked one and the flat edged tip is the non smoked tip. If there are any problems with printing said print feel free to change any thing. I will make more custom pieces later on.
Here is a extension to the Fancy Cigar that I made. Note please scale to match with main prop.
for 330ml Cans, if u want to be trashy but in a classy way and seem cultured while slamming back White Claws or Energy drinks. it's a very snug fit and won't fall out, also don't cover the little hole on the side to let the air escape…
A fancy fork that I designed to be 3D printed in Titanium (SLM). It's featured in this youtube video:
This is just a fancy washer I made for exposed bolt heads. Sorry, I couldn't seem to get a better picture.
This is a more fantastical scythe head that fits the pencil topper from soozafone's design.
Vase - or a flower pot - that can be printed in either direction. There's a hole in the middle for a cable+lamp or to allow the overflow of water. IMPORTANT: Has to be printed in “VASE” mode! Otherwise it'll be a solid block with a tiny…
Flat bottom for easy printing! Brims + Supports recommended. Check out my whole cauldron collection! Happy Halloween! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld…
Also have a look at my other design for the Trackit! Attention: Use this design at your own risk, I'm not reliable for any potential damage inflicted Lazy version of this design:…
Some fancy friction-fit lens tube covers for ETC profile lenses (full size). For those of us who store these on shelves, this keeps dust out of the inside of the tubes. Change up the colors to match your inventory system if you like. The…
