48 modeli
Hopefully this exports correctly for others to print. But I modeled the coaster and leylines designs seperatly in blender, then just made the leylines a negative volume object and placed it on the coaster in Prusa Slicer. I added one…
Wydruk około 2,24 €–2,74 € nettoWstępna wycena jednego wariantu
Behemoth from Final Fantasy XV XPS port by Xelandis https://www.deviantart.com/xelandis uploaded on 02/02/2022 I know this will be commercialized in China, happy Chinese New Year. Category: Creatures
Printed using standard settings with a layer height - 0.16mm
Final Fantasy XIV Red Mage Soul/Job Stone. Had a special request on this one for it to be a button for a special dress. So since I was doing it anyway the button version is included. It's about 16mm wide and 20 tall and almost works in my…
This Fat Cat model comes with a coin slot as well as a hole to plug with a cork or a rubber stopper for easy access to your savings. The one in the picture was printed at 200 nozzle and 60 print bed on my Aquila X2. The model itself is…
Inspired by Titor's collectoin of Soul Stones https://www.thingiverse.com/thing:1694621 I finally got around to making a few more. Category: Toy & Game Accessories
Black Mage Soul Stone from FFXIV. Inspired by Titor's collection of Soul Stones https://www.thingiverse.com/thing:1694626 I finally got around to creating a few more. Category: Toy & Game Accessories
Models of the convocation's constellation crystals, separated out so you can print each crystal in appropriate color, print the constellations in white (or color of your choice, maybe glow in the dark) then slot the constellation into…
Inspired by Titor's collection of Soul Stones https://www.thingiverse.com/thing:1694620 I finally created a few more of the missing ones. Category: Toy & Game Accessories
Note: You could probably make this look really cool if you print with translucent filament, with thick layer heights, and almost no infill. Then lastly, try using a real wood base! The in-game description is "A mounted sample of the…
Machinist Job Stone/Soul Stone from FFXIV re-submission due to being unsearchable. Category: Games
A printable model of the Ugly Duckling minion from FFXIV. You may have to scale the model up significantly due to skewed in-game units converting poorly to real-world units. Edit 2/5/22: Split version added to allow flat printing of duck…
I took the Metal Work Lantern 3d model from Final Fantasy XIV and made it higher quality, and printable. The lantern in the game is an absurdly large size, however I think 25CM tall would be a great sized lantern IRL. You will need to…
Final Fantasy XIV Astrologian Job Stone. Finally getting around to making a complete set of FFXIV Job Stones. Edit: After some feedback made an alternate smooth round (oblate spheroid) version, still flattened on the bottom so easy to…
Inspired by Titor's collection of Soul Stones: https://www.thingiverse.com/thing:1694618 I finally got around to expanding on them. Here's the Samurai. Category: Toy & Game Accessories
Blue Mage Soul Stone from Final Fantasy XIV. Just working on finishing the entire set. Category: Games
Another in my series of FFXIV Job/Soul Stones. Monk finally. Only two to go between my and Titor's models https://www.thingiverse.com/titor/designs Print Settings Printer Brand: Dremel Digilab Printer: 3D20 Rafts: No Supports: No…
Remember...remember us... Remember...that we once lived... Immortalized in ornament form for the holiday season are the square grapes from critically acclaimed MMORPG Final Fantasy XIV. With an expanded free trial which you can play…
"Created" the day Clive pledged his allegiance to Cid, this crystal shard transfixed with twin daggers is a powerful reminder of a promise made, a friendship forged, and a legacy inherited. The crystal that Clive and Cid stab that sits on…
Keychain of Final Fantasy 14 Carbuncle. Inspired by https://www.printables.com/model/490609-pokemon-keychain.
Print settings Layer Height: 0.2 Support: Tree, 70% overhang, Touching Buildplate Infill: 10% ~ 15% Build Plate Adhesion: Brim or Raft will help with keeping the model/supports stable. For additional stability during printing I adjusted…
A model of Alpha from FFXIV on a base. Print as 0.2 with supports.
I extracted the 3D model for the mug which your character uses in FFXIV and spent a few days adding a lot of detail. This is about as detailed as you would find if you truly went to Eorzea!
This is a 3D model ripped from FFXIV back in 2017 which I cleaned up considerably. Please scale it so that the eye holess match the width between your IRL eyes.
Tired of small cute-less spaces? Searching the Sil'dihn Subterrane for companionship? Look no further than Sponge Silkie, your table top best friend forever! Now comes with a hole on its rear end and the pom to fit a wire or 1.75mm thread…
overture from ffxiii-2, made at 1:8 scale ~(ish) sword should be around 140cm long from hilt to tip Category: Costume
The original design of modular baseplates is perfect for me…. but there's a couple edge pieces I need to finish off the job that aren't in the original options. Mine aren't 100% perfect. I literally just squared off the edges to make a…
FFXIV Black Mage Leylines coaster Can be printed upside down to inherit the bed texture, given good enough bed adhesion. Otherwise printing it rightside up is easy, and can be made to look pretty with an ironing pass. Printed upside-down…
Includes a key & stand. Requires multi-color printing (or painting) for the front plate.
Everyone's favorite lil' moon buddy, now drivable at home! Print all parts the number of times specified (so if x2, print it x2, and x6 print it x6 etc.) BOM: 1x ESP32 4x N20 Mini Gear Motors (for the drive) 2x DRV8833 motor controllers…
Two versions of the pillars from Elpis. One with flat faces, and the other with the in-game depth map in 3D. I think this would be great for making tabletop models of FFXIV.
These two badges represent vuln stack debuffs from FFXIV (Requires a self adhesive pin to go on the back to work as a badge you can wear)
From the Magical MMO Final Fantasy XI. I have recreated the creature Dhalmels. Large animals with long necks. Classic enemy from the classic game. I will try to continue to upload more FF11 Creatures and Enemies.
Printed using the layer color change feature to showcase the icon on the pendant
I spent a lot of time on this, it's a multi-part 3D print that allows you to print each colour with its own filament, and then clip and glue each part together! This allows you to recreate all four of the Allagan Tomestones of the…
These badges are for each of the PVP ranks in Final Fantasy 14 & are intended for multi-color 3D printing. (Although I'd be really curious how these look printed solid in resin & painted.)
A display for square shaped job classes from FFXIV (Final Fantasy: 14) This is my first upload. Print has to be finely printed, if not, the pin will not fit in or you will have to use cutting tools. Note: Use strong material or if using…
This is a keyboard specifically for summoning your summons in FFXIV! Although, technically it could be programmed to do anything you want - please watch the tutorial linked below to see what is required for this as I will not attempt to…
This fat cat was made to resemble the Fat Cat mount from Final Fantasy XIV Online.
Badges for every achievable rank included. 3D print, stick a pin onto the back (not included) and wear. Requires multi-colour printing.
These two badges represent the weakness & brink of death debuffs from FFXIV. (Requires a self adhesive pin to go on the back to work as a badge you can wear)
I was playing Final Fantasy X and becoming frustrated trying to dodge 200 lightning strikes in a row, so I built a device to do it for me! Why spend an hour doing something when you can spend 3 automating it. Designed to work with a…
Replica of the necklace Ryne crafted for Gaia, modelled after what we see Pandora wear in the Futures Rewritten Length is about 10cm including the hook
Badges for every achievable rank included. 3D print, stick a pin onto the back (not included) and wear. Requires multi-colour printing.
A 3d-printable model of the disk weapons used by the dancer class in FFXIV made by commission this includes the full model and one split into 5 parts to be connected with 4mm pegs
3d-printable models of various pieces of the hip arc ornaments from the dancer class costume from Final Fantasy XIV
A 3d-printable model of the wristpiece from the dancer class costume from the videogame Final Fantasy XIV
![[FFXIV] Sponge Silkie Minion](https://media.printables.com/media/prints/534215/images/4310423_8720a292-1694-4bfe-adaa-d4da1a98fe1e/img_5315.jpg)
