Liczymy pasujące modele…
If all your houseplants are dying and only artificial plants are an option, then this tea light is perfect for you. The flower shape creates a unique shadow. It can be printed in two colours. Ensure good print bed adhesion when printing.…
I made this to replace lost plugs from my Flow Hive frames. Printed in PETG at 0.15mm it works fine. The ones I made have lasted a couple of years and look like they will last many more.
A String Lotus Flower Artwork. Print at 0.24mm layer height. If you are using Bambu Studio you need to change your wall generator to Arachne.
Petg, Plasty Mladec, Blue, nozzle 0,4 mm, MK4 Prusa
This is designed to be used with MagnumDanger's Lego wreath. Based off a piece I had in my Lego bin, I reduced the height a bit to make it more wreathy. No supports are needed in the hole section. But you will definitely need to support…
Unfortunately, the rear footboard covers on the Soflow MyTier e-scooter protrude far and are very fragile. You often get caught on door panels and tear them off, breaking them every time. Because of the thin wall thickness, a repair with…
The main design of this case is to allow high air flow for the framework mainboard Bottom case x1 Top case x1 Case screw x4
In my case, I managed to print the Dodecathleon flower pot from the second attempt, after I added the improvements I mentioned in the model description and rotated the model a bit so there were no strictly horizontal planes. See the photo…
Based on the idea of Train Whistle Mouth Piece by MJ , the mouthpiece aims to improve airflow and direct the air to the four whistles from Train Whistle . Features No supports required ✨ Improved airflow 💨 Print Ensure good adhesion :…
This is a set of flowers for that special someone on Valentine's Day. It's based on my Springy Flower Collection found here: https://www.printables.com/model/1100526-springy-flower-collection-update Do not scale down or the threads will…
In response to the increasing number of flower pots in my daughter's room, I created a flower wall to be placed in the window. I was looking for a solution that would shade the window as little as possible. To make it, I used two 120 x 20…
Decorative wall hooks I designed for hanging items in my daughter’s room. I used medium-sized velcro Command Strips to hang them, but normal medium command strips fit too. The design is multicolor friendly. No supports required.
Why When determining the maximum flowrate for a specific hotend/filament combination I always use the poop method , in which blobs of filament are extruded and weighted to assess the capabilities of the setup tested, but this time I…
A mount to fit on the battery rails of the Holybro X500V2. I made it for my Micoair MTF-01 Optical Flow, but it could work with anything. Printed in PLA. There's little holes for zip ties to lock it on the tubes but my print came out…
Super Mario Wonder Purple Flower Coin. Print vertically using thin tree supports for best results.
A beautiful 3D printable rose, perfect as a Valentine’s Day gift, decoration, or unique keepsake. This elegant design (13 cm, 3 mm thick) makes a great alternative to real flowers that will last forever!
A nice Flowerpot podest Whatever you think of it ,as it is.
The 3D Daisy Flower model is a digital representation of a daisy, featuring intricate details that mimic the natural structure of the flower. The model is designed to be both visually appealing and functional, making it suitable for a…
Possibly part of a wedding cake topper set. Supports recommended. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This is Flower. Did a quick mount for a series of 10 LED V-shaped channels.: This is my first release, but you can see some of my other work on insta: @nova_pony Post your build! I would love to see it in white.. Print: No supports…
For SkyRC B6 Neo With .step files Base on : https://www.printables.com/model/921754-skyrc-b6-neo-lipo-charger Take care ! 💙 2025/03/17 - Added feets bumper & minor changes
Rose Thermorph. Put into 70°C water and let it morph. Printed in dasFilament PLA and Fiberlogy 40D TPU. Sliced in OrcaSlicer 2.2.0
This is a holder to attach a flower bulb. You can add feathers to make it look like a hen. I used hyacinth bulbs. This is my gift for Grandmother's Day. I got the idea from the Internet. I printed it with 100% infill and 0.2mm layer…
I made this set of funnels for kitchen or garage use. The funnels are threaded for optimal fluid flow and have a large body for high flow rates. The small funnel has the following dimensions: Small end: 11mm inside diameter, 14mm outside…
Interesting articles about 3d printing: https://www.matterhackers.com/topic/how-to?aff=7676
Interesting articles about 3d printing: https://www.matterhackers.com/topic/how-to?aff=7676
Interesting articles about 3d printing: https://www.matterhackers.com/topic/how-to?aff=7676
Interesting articles about 3d printing: https://www.matterhackers.com/topic/how-to?aff=7676
Interesting articles about 3d printing: https://www.matterhackers.com/topic/how-to?aff=7676
Interesting articles about 3d printing: https://www.matterhackers.com/topic/how-to?aff=7676
Interesting articles about 3d printing: https://www.matterhackers.com/topic/how-to?aff=7676
Lotus shaped flower with the core adapted to allocate tea candle. Eternal flower with an eternal flame. *please notice pictures are just recreations of the model.
Interesting articles about 3d printing: https://www.matterhackers.com/topic/how-to?aff=7676
Interesting articles about 3d printing: https://www.matterhackers.com/topic/how-to?aff=7676
Printable solid or vase mode. Recommend multiple walls either way. Scalable and classy. Tip-resistant. I seal these by using acrylic pouring medium for a quick coat inside then pour out and let dry. 100% leak free if done correctly.
These models are meant to be assembled with minimal supports. Print the flowers flat on the print bed, assemble them and insert into the vase/pot. I recommend 25% or greater model size for good tolerance. I used an Elegoo Neptune 3 pro…
Super simple but very useful – the stuff that 3D printing was invented for 🙂 I have a couple of Flowtron mosquito magnets in my yard but replacing octenol has always been a hassle. The cheap octenol cartridges I buy don't come with…
Flowery pattern on a coaster! No MMU/AMS required, only a single colour swap which can be done manually! To clear any stringing (often inevitable on these 0.08 height prints, especially with wetter filament), just quickly go over the…
Another flower coaster! No MMU/AMS required, only a single colour swap which can be done manually! To clear any stringing (often inevitable on these 0.08 height prints, especially with wetter filament), just quickly go over the model with…
More beautiful flowers, now available for you tables! No MMU/AMS required, only a single colour swap which can be done manually! To clear any stringing (often inevitable on these 0.08 height prints, especially with wetter filament), just…
Mode vase flower with stem - Fleur Stem can be found at : https://www.printables.com/model/1000035-stem-for-vase-flower Vase can be found at : https://www.printables.com/model/1295609-vase-with-flat-base-2-variants-and-dervish-spiral
Replacement latch for flowbee Super Mini Vac. These are still available new from flowbee but I didn't want to wait for shipping and I have a 3d printer. Why pay $6 plus shipping when I can spend an hour and make my own. I tried to…
This combination of garden hose connector from @matej and bottle cap from @3DAcademy can serve many purposes for example: pressure reductor - with a large hole in the bottle you can water your plants without any pressure from the hose and…
When I designed the spout for 5 liter canisters , my initial designs included a more sophisticated vent. While this maximizes the flow of the spout, it requires a higher air opening and therefore an additional part. So for those who want…
AeroFlow 360 is designed to provide unobtrusive airflow in interiors. With the fan oriented upwards, it creates a gentle stream of air that supports natural circulation in the room without disruptive drafts. The heart of the device is a…
My triple slot GPU was running a bit hot on the NR400 despite having 3 intake fans installed, so I made this to improve the airflow to my GPU by mounting it right behind the fans on the front of the case, on top of the hard drive cage on…
You can mix and match the small ones inside the big ones for more combinations and nice bitable cookies.
🇹🇷 Kişisel kullanım içindir ✔ | Satış için Patreon'dan lisans alınmalıdır 🔑 🇬🇧 For personal use only ✔ | Commercial use requires a Patreon license 🔑 🌿 Modern and Stylish 3D Printable Vase Collection 🌿 This elegant collection of 3D…
🇹🇷 Kişisel kullanım içindir ✔ | Satış için Patreon'dan lisans alınmalıdır 🔑 🇬🇧 For personal use only ✔ | Commercial use requires a Patreon license 🔑 🌿 Modern and Stylish 3D Printable Vase Collection 🌿 This elegant collection of 3D…
🇹🇷 Kişisel kullanım içindir ✔ | Satış için Patreon'dan lisans alınmalıdır 🔑 🇬🇧 For personal use only ✔ | Commercial use requires a Patreon license 🔑 🌿 Modern and Stylish 3D Printable Vase Collection 🌿 This elegant collection of 3D…
The model was printed using a 0.4mm nozzle and a layer height of 0.15mm. Colour changes were made at layer 5 - 0.8mm, layer 9 - 1.4mm, layer 13 - 2.0mm, and layer 17 - 2.6mm. Choice of colours is optional but the last two will probably be…
First of all, this is not my design. I was looking for something to place under my pot with a plant to take it closer to the sun, and discovered this: FLOWER POT STAND MÜNEVVER TEKİN | 3D CAD Model Library | GrabCAD As you can see, it is…
Has the seal of your flowmeter's poppet assembly failed? Disappointed that the only solution seems to be a new assembly part or a rebuild kit for half or more of the cost of the unit itself? Dig out that failed elastomeric compound and…
Affiliate links for my favorite filaments to help support what I do are here: Linktree I noticed that the air intake for the console was underneath and the Switch 2 dock fan does not contribute to the cooling of the console. I decided to…
Step into the future with this avant-garde 3D-printed sneaker concept! Designed in Fusion 360, this prototype blends a sleek, seamless upper with a futuristic, lightweight sole structure inspired by organic forms and airflow engineering.…
This model needs to be printed with supports en be careful when removing the supports on the teeth so you do not snap them off. On to of the skull i placed a porcelain insulator you can find it here:…
Elevate your desktop or workshop with this stylish and functional 3D printable can holder! Designed to hold your favourite beverage cans, this model offers two distinct printing options to match your mood and style. Print it as a clean,…
A sunburst or flower pattern fidget with either an open or closed petal design. Prints straight off but will need support on the build plate. The pictures would be better in yellow but I didn't have any :- (
This square flowerpot features a minimalist design, allowing for a modern look suited for various interior settings.
These flower magnet models I designed for a friend and was very happy with how they turned out! My designs were traced from a photo of flowers that my friend drew for another friends wedding. The flowers have holes on their rear side that…
I recommend applying a resin coating if you want to use the flowerpot as a water reservoir. When in contact with the soil, consider using eco-resin that is safe for your fragile plant.
Immerse yourself in the world of pixel art with these unique pixel-flowers and pixel cactus! Print your own pixel plants in the comfort of your own home, bringing the perfect blend of gaming and modern aesthetics into your home. You can…
Should print fine without supports, consider printing with a lower layer height for better quality. Version with and without drainage hole. If you enjoy my free 3D models, consider supporting my work to help me create even more…
I had to repot a large plant and designed this pretty big plant pot for that purpose. Since not everyone needs such a large pot, I also uploaded a smaller version that is 70% of the size. You can easily scale this to your desired size.…
Introducing: The High Flow Water Fountain Straw! Built for those who don't get enough water from the normal drinking spout, the High Flow Water Fountain Straw should fill your mouth in under a second. Additional feature: If you fill up…
The sun is shining, colorful flowers are blooming, and butterflies are dancing through the air – that’s what spring feels like! To bring this special feeling into home, onto terrace, or into garden, I’ve designed this decorative butterfly…
COMMERCIAL LICENSE // UNLOCK ALL FILES ====================== PRINT INSTRUCTIONS 6-12% infill 5 top layers 2-3 outer walls. No supports. Scale to desired size. ====================== MODERN MACHINE© STL files are strictly for personal…
Prints well @ .2mm, with two walls. 20% infill With these settings it leave a very nice ripple in the wall of the vase where the infill meets the inner wall.
A replacement attachment for the Flowbee haircutting system. Print in PETG. No supports needed.
Create your own custom sunflower t-shirts with this stencil! A beautiful and detailed sunflower pattern that will look great on any color fabric. Breakaway Bridges: The stencil includes small, strategically placed bridges to ensure that…
Simple to print, use tree supports (touching buildplate ONLY) for best quality. Ironing if wanted.
Elegant flower pot or vase decor for home Beautiful flower pot design or decorative feature for your home. If you have option to print them in more shiny colors you will see how design becomes more alive. If you like my work you can find…
Mit meiner Teiglüte kann das Schneidemesser von unten schmerzfrei gedreht werden und somit können eventuelle Teigreste aus der Maschine problemlos entfernt werden. Ein Must Have für alle Besitzer von Monsieur Cuisine Smart etc.Mit meiner…
Vase - or a flower pot - that can be printed in either direction. There's a hole in the middle for a cable+lamp or to allow the overflow of water. IMPORTANT: Has to be printed in “VASE” mode! Otherwise it'll be a solid block with a tiny…
Printed on an Ender 3, default settings (TPU) from Prusa Slicer. 2x took about 1.5hrs. Perfect fit
For the spinner is required standard skate 608 bearing (inner di 8 mm, outer di 22 mm, width 7mm) and 5 M10 nuts. Spinner diameter 78 mm. Print Settings Printer: Print Rite DIY Rafts: No Supports: No Resolution: 0.1 - 0.25 Infill: 20-70%…
A small redesign of the engineering meme. Saw the design on the internet, but there you had to pay for the .dxf files, so I thought that I should create my own version for free. You only need 4 some small srews for the wall if you want to…
A simple vase with a curvy design. This model was NOT created with any use of AI. Designed to print without supports. If you intend to put water in the vase, paint inside and outside with a material like epoxy resin to make it waterproof.…
to better trap the heat when printing, or so the venting fans can do their work freely when needed, just slide the vent slider for needed option. can be operated to both left or right side depending which slide you put up or down. part…
Flower keychain and earrings (three models) Flower for keychain with and without ring to be put on the keyring (you can also use hole which is part of the flower) Model for dual color printing (single extruder) - the back side is easier…
Put in a roll of toilet paper without the cardboard in the center. There are a couple of designs available, the lid snaps firmly into each of de designs. The flowers are embossed using a texture, this makes de file very heavy. I was…
The head is movable, you can chang the face, its based on the little buddy figurine.
"Flowers" Cookie Cutter set (8 models) Cookie cutter is made of 2 parts - cutter and inner stamp. Parameters: Flower1 Stamp - 56mm x 56mm x 4mm Cutter - 64mm x 64mm x 12mm Flower2 Stamp - 55mm x 55mm x 4mm Cutter - 63mm x 63mm x 12mm…
Mold used for hydro gels Theres two diffrent style molds one you just pore you solution in other has insert
Just the torchflower from minecraft! It's a flat model, but feel free to make it like the 4 way flower thingy.
6 pieces from frag plug flower and 1 from frag plug flower 1.1 pet g Enjoy!
A neat flower with a small hole for attaching it on a necklace. The flower was created with Inkscape as a SVG-file. I exported the layer as DXF-file, which is used in OpenScad for linear extrusion. Maybe you prefer working with the…
3D‑Printed Flowerpot with Saucer – Simple, Modern, and Functional This 3D‑printed flowerpot features a clean cylindrical design that fits seamlessly into both modern and traditional interiors. Its smooth walls and balanced proportions…
This flower-shaped jewelry organizer is beautiful and practical. It has several small compartments to store rings, earrings, necklaces, and other small items. The clean, minimal design looks great and is easy to 3D print. Powered by…
This is FanFlow Fortress Cover with Elegoo logo exept of WindWarden one
Print 0,4mm nozzle and 0,25mm or 0,3mm layer. PLA is good for inside flowerpot, for outside flowerpots is better PETG. . . . . . . . . Powered by MakerWorld-Make My Vase ( https://makerworld.com/makerlab/makeMyVase )
![Train Whistle - Improved Airflow [remix]](https://media.printables.com/media/prints/1153582/images/8703587_ab402d98-52b4-42c7-869d-b51983395d24_f020e1eb-b99f-4928-a666-87bbe62c6de2/20250118_152138v2.png)
