Liczymy pasujące modele…
This is a protection frame for the Yaesu FT817/818/ND series of radios, with places for rubber feet and holders for an antenna tuner. Usefull during portable/qrp work. Works with 10mm M2.5 screws and washers.
protection rails for ft891 ham radio yaesu
Reupload of the FT891 side rails designed by IU1OPK , along with a merged and longer model by mbrewha04 . There are a few remixes of this item floating around printables.com, but all have some changes that I don't really like because they…
I designed these to fit 8 or 9 Li-Ion 18650 cells inside the FT897. I ended up with 8 cells, but left the extra space since its useful for wiring. You will need a bunch of m3x16 and M3x8 countersunk screws. Can also use self-tapping. I…
protection rails for ft891. i didn't like the 2 piece models
print diagonally on smaller printers, 50% infill
I remixed https://www.thingiverse.com/thing:2527434 since I needed to install a different switch, LED and charging connector. I added a bit of thickness so it works ok with PLA Please hit the LIKE button if you download it, that way I get…
This is side rails for the Yaesu FT891 HF radio, they should be used with 4 pieces of M4x10 screws with washers(smaller than 10mm diameter). The frame will protect the buttons on the front during field operations or transport. I recomend…
Eventually, your visor mount will break and Toyota/Subaru will charge you $80+ to replace the entire visor assembly. Print this in a high strength and high temperature resistant filament like ASA or PC for a tiny fraction of the cost.…
I bolted the yaesu 857 faceplate bracket to this printed mount and it worked great. I've also add a file that has the standard 1" ram ball in case you opt to mount it with a ram mount system. Update March 2025: Updated file with a center…
Created but untested as I do not have this radio. This was designed to allow the batt connectors to come straight up for POTA/SOTA work. If you print and it works please let me know!
Prototype, still needs some work.
A microphone mount that can be attached to 3D printed octogonal side rails , for the Yaesu FT-891. Needs 1 M3 nut and one M3 x 12 screw. Can be mounted on either side. Works with sausage fingers. I suggest printing it in the suggested…
This is a simple protection cap for these great FT817 side rails: https://www.thingiverse.com/thing:4118033 Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 2.0 Infill: 35 Category: Other
This is a case I designed for the FT8 Phaser HF transceiver by Midnight design solutions (See details here: https://midnightdesignsolutions.com/phaser/ ) I've included both a multi-material version of the front panel and a plain version…
I tried a few of the designs other creators made but they did not work for the hardware I had. I had the Storehouse pack of metric hardware you find at Harbor Freight. I made the ball to take the head of the bolt and the length of the…
Introduction Remix inspired by a fellow ham doing lots of POTA with the FT‑817. Rails are reworked in FreeCAD to attach the original arm strap. Printing Basics PLA works for light duty; for real use prefer PETG, ABS/ASA, or Nylon Print…
I wanted to put the FT857 head where my cell phone mount was.
This is a monorail foot to go with the FT817 / FT818 rails that were designed by https://www.thingiverse.com/thing:4118033 I prefer this to having individual feet. This rail nicely clears the mic when folded against the radio body. Use M4…
This is side rails for the Yaesu FT891 HF radio, they should be used with 4 pieces of M4x10 screws with washers(smaller than 10mm diameter). The frame will protect the buttons on the front during field operations or transport. I recomend…
