Liczymy pasujące modele…
My Logitech G433 was broken on both Pivot Points, but i can't find Spareparts for the G433 :-(. Here are my printable Spare Part's ;-) You need: print all four Parts (two Left, two Right). 8 M3x8 Screws 8 M3 Nuts T5 Torx Screwdriver small…
The headphone stand / charger is meant for a convenient charging and display when not in use. It is made to fit a magnetic detachable USB-C cable from aliexpress called Fonken. The fit is tight fresh from printing on my…
This serves as a full substitute for the predestined weak spot found in the Logitech G430, G930, and F540 Headsets. You're able to utilize the original screws. The cap is designed to be printed in an upright position to eliminate the need…
This is the part on the Logitech G430 headphones that appears to break (2 headphones both broken in my household). Pockets provide for recessed screw and nut placement for a cleaner look. I printed these as oriented, support-free, in PLA.…
This is a replacement part for G430 Logitech headphones. The side piece that always breaks, has been rebuilt stronger than before. This is for the right speaker side, if you need the left side just mirror them in your slicer program.…
I've printed the kit with PLA as it is stiffer then PETG. 6 perimeters and 6/6 top bottom walls. Try a 0.6mm outer perimeter width for better chamfers/fillets look. Once printed: apply M2 (3.2mm outer diameter) heat inserts using a…
A simple housing for the LIGHTSPEED dongle of a G435 headset. My drawing is on Oneshape.com. Unfortunately, I'm not a great professional. Maybe someone would like to lend a hand again ;-)…
I remixed this to be one piece and shorten it up. the usb hole is tight fit. Printed with 3 walls and 15% infill
S&W Shield-2 9mm & 45cal, and the Glock 43 mags work perfectly. Taurus TX22 has a wider base, it will not allow side-by-side storage. The single holder version works great with the Taurus. The prints are a better way to store firearm…
Glock 43/Sig P365 hand gun display mount. Display at home or in your store. Fits perfectly into magwell. P365 is a very snug fit as it was designed for the G43. G43 fits more like the Glock magazine...but found it does fit 365 as well.…
I had best results printing vertically with a brim, but, that takes significantly longer. Acceptable prints were made by using supports from print bed only and printing with the rail side on the bed. 15% infill .15 layer height 2 Perimeters
Designed this so I could carry my extra G43X magazine on my belt. I have not printed this yet, just some test pieces. Theoretically, it should work, but I'll update with other instructions when I can print it. Added bad picture of my two…
Pohotovostní stojan na G43X. Jeden zásobník na levou ruku pro rychlé nabití..
I was annoyed that this wonderful headset would not fit my head, so I designed an adaptor to rectify the problem. It comes in 2 parts: a body, and a latch. The latch is there to prevent the cups from sliding off the adaptor body. It goes…
I had a pair of Logitech G432 drop the right ear piece out of the headset. I found it was because the retaining bracket on the inside had broken. I modeled this up and while it's not full OEM or pretty, it works! When installing it, make…
Carcasa para la placa B-G431B-ESC1. Dispone de una ventana inferior para soldar los cables para el encoder.
Soportes que hice para mi tableta XP-Pen Star G430S. Son diferentes estilos que vienen en dos tamaños: uno que cubre 135 mm de la tableta y otro que cubre 90 mm. Solo probé el de las fotos, que es la versión pequeña con la parte trasera…
This is a hook designed for hanging up Logitech G230/G430 headphones. Commonly available hooks in stores are generally not wide enough to accommodate the headband on these headphones. Attach a 3M Command strip or equivalent to the back,…
Wall mount for Logitech G435 2 Screws M4
A dongle holder for the Logitech G435 that fits snugly around the shaft of a headphone stand. The shaft is 25mm X 10mm. The dongle is 17mm wide and 7mm thick. https://www.tinkercad.com/things/5VSjPyhBonb-logitech-g435-dongle-holder
Just a mounting bracket for the DAC dongle that comes with the Logitech G433 headphones. It may come with other models too. I made this so I could mount the DAC and the headphone holder completely under the desk with a USB extension…
A rather filament-consuming insert for the Auer EG4322 eurobox. It adds ca. 10cm tray to store stuff in 2 layers. You need a printer with a print bed of at least 270mm in one axis. Materials You need at least: a bit more than 1kg of…
This headphone holder is specifically designed for the Logitech G432 and provides a perfect fit for a clean and practical setup. The mounting cylinder has a 30 mm diameter and is designed to fit directly into the cable management hole of…
English Remix of the excellent Logitech G435 magnetic charging stand by Adam Ž. Why this remix? The original stand weighs about 110 g. The magnetic connector holds the headset with about 240 g of force (I measured 243 g with a kitchen…
Requirements : Tree Supports Glue (PS >The Prop is Scaled down so it can be easier to print for keychains or a smaller version of itself . If you want the full size as the real G43 Sniper, the prop needs to be SCALED 1000%) Available…
(YOU WILL NEED TO TEAR THE CUPS DOWN FOR THIS.) A model that you can print in place with supports to replace your broken g435 head band. Has a channel for the cable between the ear cups but that channel doesn't hold the cable in place. I…
Printed with 0.16 layer height with PLA detect thin wall on (probably not needed) Gyroid (15%) if you don't know how to get cables on there with reliable connection to then solder to the board check out this video:
A replacement piece for Logitech G432 headphones. I found a similar style of repair, but they didn't fit on the G432 model, so I made my own, inspired by this model. Recommended settings: >= 20% infill (cubic or gyroid ideally) >= 3…
Requirements : Tree Supports Glue (PS >The Prop is Scaled down so it can be easier to print for keychains or a smaller version of itself . If you want the full size as the real G43 Sniper, the prop needs to be SCALED 1000%) Available…
