Liczymy pasujące modele…
Vertical and Horizontal mount for Insta360 Go3. Used support for enforcers only. Enjoy! 8/20/23 UPDATE: Fixed bolt hole at bottom of vertical mount. Added new combo vertical/horizontal mount. Support for enforcers only.
Insta 360 go3s rugged box, this is different from go3 model(go3s lens is bigger). I have remix the following model: https://www.printables.com/model/528732-insta360-go-3-rugged-box and use the…
I bought a JBL GO3 Bluetooth speaker for my worktable to play music from my laptop while working. Did not want it to be sitting on the tabletop with all my tools, so I designed a bracket that I can use the 3M command tapes and mount to…
Remixed case for the Insta360 Go3s, made room for the larger camera lens of the 3s. This prevents accidental recordings.
Was looking for rugged protective covers for Microsoft Surface Go 2 , couldn't find anything for my purpose, so had to design my own. I designed it specifically to use it with my Surface Go 2 but figured out that it fits for following…
a 3d model for mesuring or making custom mounts.
A bit holder to be placed in the latch of the Bosch GO3 box. Printed in PETG. Avoid brittle material because some flexibility is needed for clamping. Got my Bosch Go3 without the bit holder. Did one for myself.
Helmet Mount for the Insta360 Go3. I made it to fit my paragliding helmet. You'll need: - two rectangular magnets (12x8mm - I use 12x8x2 N35) - a strong, thick double sided tape (I used 3M VHB - the same stuff you get with GoPro stick-on…
It has small hexagonal connectors fitting standard " insert-empty" for HSW I recommend enabling supports.
to print with tpu
Es handelt sich um eine Halterung für die JBL GO 3 Box, die wie auf den Fotos ersichtlich auf der Fahrratsattelstange oder auf dem Lenker montiert werden kann.
This model was originally designed by Mango3d please download and like the original model I had gotten permission from the creator to post this but remixes are turned off so the link leads to my make of the model from which the original…
Simple but functional bit mount for Instal360 Go3S. It's light and compact. It requires two 10x3mm round magnets.
Da der Easy Clip für meine Insta360 Go3 nicht so richtig an meinem Specialized Tactic 4 Helm halten wollte, hab ich einen kleinen Adapter gemacht, der von unten mit 3M Tape an den Visor geklebt werden kann. Der Halter ist so konstruiert,…
This will fit Insta360 Go3 and Go3S cameras for any drone that has screws offset from each other at 25mm. Currently the ones I have are GepRC Tern LR40 and Diatone Roma L5. Print with TPU on the side as shown in one of the images, with…
I have designed this quickly to replace the strap on my JBL GO 3, as i don't need it in my application and i think it is looking off. Warning: the Model needed some sanding to fit in the groove in the speaker - but only about 1 Minute.…
la caméra filmera en 8K / 240FPS si imprimé en rose bonbon
The adapter is designed to screw directly in place of the original protective lens . Once installed, it enables the attachment of a wide angle lens, expanding the field of view for creative shots. This custom 3D-printed adapter allows you…
After install, slightly unscrew the brackets and use the front screw to tighten the belt. Have the gantry fully to the back and measure the gap with the frame on each side. Tension until both gaps are equal. I pre positioned the…
Ein anschraubbarer Wandhalter für BOSCH GO 3 Schrauber.Mit 4mm schrauben anzuschrauben.
This is an universal camera mount for Insta360 Go3 / Go3S for attaching to battery straps on almost any drone that fits. No supports are needed, print on one of the sides. Print with TPU, 100% infill. You can add some thin rubber…
A case to carry the tiny camera without risk to start it when it is your pocket. Used magnet 2 of 5x10 mm and 4 of 5x3 mm Made some pocket and insterted 1 mm strip to better hold part together. Print two of these. Install 10x5 magnet in…
This gimbal mount for the Yuneec CGO3+ is a self-interpretation and serves as a spare part. Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: Yes Alignment: Like font The brand logo is only used to identify the battery system. This…
This is a print head I modeled up to mount an Orbiter v2 extruder Rapido2 hotend Btt Ebb42 PCB Klicky probe to my Seckit Sk-Go3. It uses lots of M2 and M3 bolts and corresponding heatset inserts. Every M2 bolt in the BOM uses an M2 4mm…
Quick remix to work with beacon and support for standard limit switch position.
I was searching an esay way and protective way ton install my new Inta360 Go3 in my AtomRC Dolphin. Instead of installing it on top where it is exposed and impact the aire flow, I decided to insert it in the Gopro slot in the Dolphin…
a modefyed mount with the 24,5mm appar side to side and 34,5mm front to back also i addet a front brace to keep the cam extra secure and addet a cutout for the lens of the go3s
For mounting insta360 go 3 to yashica 124g to cold shoe
This is a ring that attaches the GO3/3S camera to your finger. It allows you to easily switch between filming the scenery and yourself while walking. You can set it to either landscape or portrait orientation. This is only possible…
This model was originally designed by Mango3d please download and like the original model I had gotten permission from the creator to post this but remixes are turned off so the link leads to my make of the model from which the original…
a modefyed mount with the 24,5mm appar side to side and 34,5mm front to back also i addet a front brace to keep the cam extra secure and addet a cutout for the lens of the go3s
Ein anschraubbarer Wandhalter für BOSCH GO 3 Schrauber.Mit 4mm schrauben anzuschrauben.
Material: PETG Infill: 100% Support: normal Layer high: 0.16mm
360 Go3 Mount for Empire EVS Paintball Mask *EZ Clip accessory required* Easily remove the magnetic base from the EZ clip and attach to this 3d printed base. 3d printed base pressure fits onto the mask/goggles. VideoLink Includes…
Da der Easy Clip für meine Insta360 Go3 nicht so richtig an meinem Specialized Tactic 4 Helm halten wollte, hab ich einen kleinen Adapter gemacht, der von unten mit 3M Tape an den Visor geklebt werden kann. Der Halter ist so konstruiert,…
Exact replica of the JBL GO3 speaker in 3mf, STL, and SKP files. High quality and precision. Designed from the ground up with exact measurements. For 3D printing and software use.
The two indentations are for two Neodymium magnets with a diameter of 10mm and a thicknis of 2mm. In the files you will find a freecad file (so you can modefy the design), a step and an stl file.
I needed somewhere to put my JBL GO3 speaker on my Sun Mountain Pathfinder Px4 pushcart so I designed this to snap onto the “attachment knob”. I tried a couple of different configurations but I found that embedding the bottom ring into…
I made the design in nesting boxes, you can place a different design inside.
Design Concept This 3D printed holder is designed for the JBL GO3 speaker, providing a stable and stylish solution to keep your speaker accessible and secure on your desk or workstation. Usage The holder can be placed on any flat surface,…
The original model was easily removed by accidental touching, so the inner diameter was reduced by 0.1 mm. Now it fits very tightly or may even require a little file work.
Protective cap for Insta360 GO 3S, prevents dust, scratches, and minor damage during transport and storage.
Material: PETG Infill: 100% Support: normal Layer high: 0.16mm
360 Go3 Mount for Empire EVS Paintball Mask *EZ Clip accessory required* Easily remove the magnetic base from the EZ clip and attach to this 3d printed base. 3d printed base pressure fits onto the mask/goggles. VideoLink Includes…
A set of bins to hold most of the go3s delivery and motorcycle helmet mount 2x2x9u containing the go3s unit and motorcycle mount 2x2x3u containing the necklace mount 1x2x6u containing the stand mount (T shaped objet) 1x2x6u containing the…
insta360 Go3/3S Simple Camera Grip with Magnetic Quick-Release Mount Need: Magnetic Quick-Release Mount https://www.amazon.com/gp/product/B0DZCMC9CM/ref=ox_sc_saved_title_3?smid=A2WAM00OKSLV7X&psc=1 D-Ring 1/4" Tripod Screw…
This JBL GO3® speaker stand is perfect for hanging on a radiator (not too hot if made of ABS), at the top of a window or any other point on which this stand is compatible in size.
The official lid is a bit costly for me, that's why I made my own by printing it. I printed the Parts on my Bambu Lab P1S in ABS with Supports. The Original Lid:…
