Liczymy pasujące modele…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
For best results print with logo facing up, with supports, and ironing enabled, the back side will be rough but will be hidden when installed. 40% or higher infill recommended
This is a replacement switch for a 20460 kettle. It may work on other Russell Hobbs kettles, but I've only tested it on my own! Attaches firmly and seems to do the job well. Simply align the little protrusion to the bottom, and push it…
Print with 4 perimeters, 25% infill. Use PETG or something more heat resistant like ABS, ASA etc.
A nicer holder for the electronic salt and pepper grinders from Russell Hobbs linked here: https://en.russellhobbs.com/product/salt-and-pepper-grinder-23460-56
This model is one of five created for the 3D Printing Nerd episode “Make Me a Super Hero”. You can download and print this, OR, you can download and remix this as you see fit! Print your remix, and add it here on Printables AS a remix,…
Replacement handle for a Russell Hobbs brushed aluminium toaster.
This is a replacement for the small gear on the Russell Hobbs mini-chopper. Print Details Material: Prusament PC Layer Height: 0.2mm Infill: 100% Installation It's a very tight fit and needs to be put in place with the help of a few taps.
Printed in ABS with 100% infill
Fast and Furious Hobbs and Shaw Film / Cinema room sign, Colours can be altered to whatever you prefer through your AMS (Bambu) or through you current printers configuration. Large Measurements approx.: 22cm x 7.5cm x 2cm Medium…
Reproduction of a gear for repair Category: Kitchen & Dining
I made this tray as I noticed the grinders lost pepper and salt each time you pick them up. Although the grinders came with a lid each where you can place the grinders on but did not do the job very well. This tray can holds booth Russell…
Russel & hobbs sandwich maker plate holder
This is my entry for the 3D Printing Nerd "Make Me a Super Hero" contest. I remixed the model created by proffhobbs: https://www.printables.com/pl/model/183560 Every superhero needs: a cool pose weapon way of hiding its identity cape So I…
I wanted to be able to refill my Russel Hobbs salt and pepper grinders without making a mess every time. These funnels are the solution to my problems. They both work perfectly but i decided to go with the wider one as it is easier to…
Old Black Lid handle went brittle and kept breaking. Designed a replacement that happens to make the kettle look like a chicken. Print in ABS or other temp resistant material (not PLA, likely not PETG). Enjoy
Remove the top cover. Use a long Philips screwdriver to remove the small screw deep in the cover. Print the new button on its side with support enabled. This orientation is important for strength. Pushing the new button into the hole in…
The measuring cup of my drinking powder is a little bit to big. For a clean transfer of drinking powder to the mixer cup I designed this print. It fits nicely on the mixer cup. You can print it without supports. The little hole and the…
The Russell Hobbs sandwich maker factory arm broken. This is a replacement. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Gembird PLA White Notes: No support need…
A stand/base for the Russell Hobbs salt and pepper electric grinders that helps to keep them nice and tidy and together. It can be used with or without the original clear plastic ones that come with the set.
For Russell Hobbs 23120 Coffee Grinder, it replaces the stock container with an open container which you can fill your portafilter or basket directly. I haven't actually printed this version, where I made some replacements to make the…
My aunt was looking for replacement parts for a Russell Hobbs RHCP021 Biscuit & Cookie Maker and I could not find the parts or the Biscuit & Cookie Maker in stock anywhere, so I modeled the parts in openSCAD. The models are oriented in…
Just crashed the original lid and mixed it. So built a new one and it fits! :) Printed upside down with tree-support for the small hooks!
Accessory holder for Russell Hobbs 20240-56 Illumina
Exactly like the original by richgain , but removed the bulge to add space for the original metal tabs.
Prints without support. I use one stand to place the plates in my cabinet in upright position to save space. Two of the stands on both sides can be used for transporting the plates without scratching. If necessary, you can secure the…
Needed a replacement for the main foot for my Russel Hobbs 24550 toastie sandwich maker and couldn't find on .. so I made one! For strength I printed mine in PETG but PLA should would work fine as the area is well away from the heat
PLUG / CAP / COVER / TAPÓN Russell Hobbs Victory Compact Kettle. Avoid getting dust when not in use. https://es.russellhobbs.com/producto/hervidor-victory-compacto
This is a replacement base for a Russel Hobbs kettle. You can find the original model here for copying:…
Details (Langbeschreibung): Einer der Kunststofffüße unseres Russell Hobbs Reiskochers (Modell 19750-56) ist durch eine Unachtsamkeit geschmolzen – das Gerät wurde versehentlich auf eine heiße Herdplatte gestellt. Da der Reiskocher…
I designed this direct replacement for the top adjustable dial on select Russell Hobbs pressure cookers. Print Settings: Material: ASA (UV & heat resistant — ideal for kitchen environments) Infill: 50% (for durability under frequent use)…
Wall-mounted holder for a Russell Hobbs electric pepper/salt grinder. Designed for mounting with double-sided adhesive tape — no screws. Best printed in PETG. For extra strength, the arms and base can be printed with 100% infill using a…
Bottom part of Russell Hobbs grinder
Wall-mounted holder for a Russell Hobbs electric pepper/salt grinder. Designed for mounting with double-sided adhesive tape — no screws. Best printed in PETG. For extra strength, the arms and base can be printed with 100% infill using a…
25cm tall 2D Gorillaz bust to be printed in two pieces, bust and hair separately. Please see images for assembly instructions. Printing parameters below. Thanks for stopping by :) No comercial use. Personal use ONLY Link to Patreon :)…
Fast and Furious Series - Luke Hobbs (Dwayne Johnson) - 2001-2023 3D printable model.
