53 modeli
This is not perfect part. first test fitment is done and corrections (estimates) are in files. So this is prototype at the moment. Use it for your 500bucks beater and design funky shait to it if you want. couldnt find this part anywhere…
Wydruk około 4,28 €–5,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Einfacher erstatz für den Originalen Kunstoffdeckel der ständig bricht. Dieser aus TPU wird defenetiv länger halten. ------------------------------------------------------------------- Simple replacement for the original plastic cover…
vehicle or car scale model add on for aicraft painting stand https://www.printables.com/model/78565-aircraft-painting-s
Here's a remix of Chimchar by 3Dprint1UPu. I've painted it, enjoy! mmu3 compatible
This is a Mug Holder for the old Nissan Micra (mine is from 1997) which fits in the hatch behind the hand brake. The Diameter is 73mm.
Its the Lever for tilting the Front Seats of a Nissan Micra K12. My sisters car didnt have the one on the right side anymore so I made this. If you need any adjustments let me know. Please print this out of PETG/ABS/ASA as PLA wont hold…
This is a can for windscreen wash fluid for Nissan Micra K12 (2003-2010).
Businesscard holder positioned on a Avon Classice Race Tyre. To be printed either in one colour or if MMU is available in two colour version. Support on bed 25mm recommended. PLA Filament for both colors used. Resolution 0.2mm. For users…
I created this model specifically to fit speakers in my K11 nissan micra that I do yearly Balkan trip in. In my case I needed to crimp new wiring as the stock one was not compatible so keep that in mind. You will need M4x16-20 (depends on…
This is my first upload! Designed on Nissan Micra K12 (2005). The design is meant for inserting on the metal shaft of the seat lifting mechanism. If it does not fit perfectly you can use superglue to secure it. This handle is meant for…
Upgrade your Nissan Micra K11 with this custom-designed 3D printable vent replacement (for assy 687616F710), built to perfectly hold a 52 mm gauge. This model lets you replace one of the stock air vents with a clean, factory-style mount…
Custom fitment adapted from the original. Generated through configuration page on OnShape page. Fits La Marzocco Linea Micra. Mini untested.
The sword version is for holding swords with symmetric crossguards. The saber version has the cutout angled so that it supports the sabers with the offset center of gravity.
The factory design of the hood prop rod holder is fragile so you can easily replace it with this stronger one
Bei meinem Nissan Micra war der Verlierschutz für den Tankdeckel gebrochen. Ich habe dieses Ersatzteil mit “TPU Medium” von Extrudr (A98) in weiß und anthrazit gedruckt und mit einer M4x16 Schraube und einer Mutter unter der Tankklappe…
This is a bushing for trunk plate of Nissan Micra K12 (2003-2010). No screws needed but your plate may not be damaged too much. Print Settings Printer Brand: Prusa Printer: i3 MK2S **Rafts:** No Supports: No **Resolution:** 200 Infill:…
My little Micra haven't any cup holders and I think it was very annoying when I use my seat and handbrake lever to hold can of drink. I found one file on this site, nice idea but I want some nicer looking. Then I remove handbrake cover…
Some Leathermans can use variety of bits. But Micras don't, so I made one. It's done for light work purposes. Keep in mind that if you put too much strength adaptation can break or Leatherman tools can bend. Adaptator fit on philips Micra…
Two of Leatherman Squirt, one of Leatherman Micra.
Replacement knob for manual Nissan Micras. Confirmed to work on canadian k13 micras. Just press the new knob on and slip the boot around it. If you are in a hot climate, print in PETG or even better ASA or ABS.
Hey, welcome to my design. Will upload from time to time more and more variants of my design of Holder. If you have a specific wish, contact me and I modify it for your needs + upload it here in the project to share and build a "library"…
Apr 16, 2021 This is a simple key fob with the text "MICRA". I have uploaded the the part as stl, parasolid and step so you should be able to modify it. If not, it's simple to redesign it. I have paused it at layer 5 or 6 and changed the…
Soportes para cortadoras por oscilación worx, puede ser compatible con modelos de otras marcas Table mouting bracket for worx oscilating tools, It maybe be compatible with other brands.
I needed a replacement for the original mirror attachment point for my old Nissan Micra K10 1989 since the original is made to break easily, this is not a perfect replacement yet but it works like a charm for me at the moment in petg.
Espresso Portafilter Holder (Compatible with Eureka Atom 65E & La Marzocco Linea Micra) Slide your La Marzocco Linea Micra portafilter into place and tilt it up to activate the button on your Eureka Atom 65E. Print it with 100% infill to…
The brackets are for use with 1" dowels and 1/2" dowels. The brackets shown in the photos were printed by Shapeways in Strong and Flexible plastic using sintering (before I bought a printer in 2016). As a substitute, I suggest using a…
Tor für z.B. Kuchendekoration oder zum Basteln Maße 70x40mm Gate for e.g. cake decoration or for handicrafts Dimension 70x40mm No Support needed Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports: No…
Daiso magnets were used for this plate but feel free to substitute with magnets of your choice. I added felt tape over the magnets to ensure the scale does not get scratched. Designed for Acaia Lunar Scale
replacement holder for the original nissan micra k12 model key holder. Note: retainer for key and immobilizer chip does not fit that well, i used superglue to hold it on when assembling my key. the retainer pins are too weak, or not well…
Nissan Micra Tavan Lambası
A friend of mine, Yves, designed this replacement part for Michel’s son’s car, since genuine components are no longer available from Nissan. It’s part of the mechanism that extends the rear windows on the convertible. Yves carefully…
Micralet - A bracelet for your MicroSD one piece, no support needed How to carry all your projects, always with you and opportunely organized? Try this nice little case for MicroSD, you'll love it! As bracelet or pendant, cool as it…
I recomand the facedown print and a smooth pei for the perfect result.
This is a replacement parcel shelf support peg / boot privacy cover clip for the Nissan Micra (K12, ~2002–2010). These small pegs often snap off, leaving the parcel shelf (boot privacy cover) unable to rest securely. I could not find a…
printed with pla+, would recommend asa or petg due to better heat tolerances 25% infill print with supports i used 1mm walls and it worked well. search “maverick fits” for hooks, cup holders, etc
📸 Faithful reproduction of a miniature aircraft stand for the Luxair Embraer 145 , made using the Revopoint Pop 3 Plus 3D scanner. On the left, the original with its markings, and on the right, the 3D-printed copy after scanning. A great…
Lower Seat Adjustment Knob for Nissan Micra K12 You have to print it in either PETG/ABS/ASA as it will get hot in your Car an PLA etc wont hold up. Made it for my Sister as her “new” Car didnt have it anymore. If you need any adjustments…
Title + please print in high temp materials such as PC (original is pressed nylon PA)
NISSAN Micra wall-art, Se puede pegar a la pared con sika, o escalarlo y hacer un llavero
The original brick building system was developed by Hilary Fisher Page of Kiddicraft as the "Self-Locking Building Bricks". Lego was the first copybrand, initially copying everything from moulds to box designs to printed paper parts.…
Mounts an EMU Black in the location of the standard Nissan Micra K11 coilpack Ecu. orientated so that the connectors and map sensor point towards the Passenger side on a RHD vehicle. Utilises the standard ecu mounting holes, I replaced…
i gave flexicrab a tall hat very funny
Been a while since I printed these.... 4 versions (varying thickinesses of material). Purge cover itself prints in TPU, diaphragm retainer and face ring print in ABS or PETG Category: Sport & Outdoors
A blank for a nameplate to cover up the tag on our MidWest iCrate pet crate. I'm sure it could be remixed to work on many similar crates. Note: this model is intentionally asymmetric to match the spacing of the bars and placement of the…
I made a organizer to neatly stow the rovyvon e8 angel eye, leatherman Micra, MR.GREEN Ultra Thin Nail Clippers, and uncle bills sliver grippers. I have 4 versions 2 with the leatherman Micra and 2 without. One of each has a hole in order…
A glowing gamepad sign that turns any desk into a gaming zone. Shaped like a classic game controller, it lights up from the inside with an LED strip and stands upright on its own desk stand. Features Iconic gamepad silhouette with D-pad,…
📸 Faithful reproduction of a miniature aircraft stand for the Luxair Embraer 145 , made using the Revopoint Pop 3 Plus 3D scanner. On the left, the original with its markings, and on the right, the 3D-printed copy after scanning. A great…
My little Micra haven't any cup holders and I think it was very annoying when I use my seat and handbrake lever to hold can of drink. I found one file on this site, nice idea but I want some nicer looking. Then I remove handbrake cover…
replacement holder for the original nissan micra k12 model key holder. Note: retainer for key and immobilizer chip does not fit that well, i used superglue to hold it on when assembling my key. the retainer pins are too weak, or not well…
The original brick building system was developed by Hilary Fisher Page of Kiddicraft as the "Self-Locking Building Bricks". Lego was the first copybrand, initially copying everything from moulds to box designs to printed paper parts.…
