Liczymy pasujące modele…
Simple filament runout sensor hanger that has a pocket for the existing bowden tube to be used for a harness/cable carrier. Run both the extended wiring and existing bowden tube inside cable wrapping. See pictures.
I adjusted the angle of the water holes so it should reduce the amount of water that dribbles down the side of the pail from surface tension. I completely forgot how I printed this so ¯\_(ツ)_/¯
mounts on the mirror and gets it out of the way of your bathroom clutter. Bought to you by the nasty flu i've had over the last few weeks. no brim, .2mm layers, whatever material works for you V3: Completely redesigned for better…
Remix to add a tray to hold any possible water droplets
I made a holder for my sinus rinse, which I had trouble finding a place to store, so I can keep it all together and dry it out. No supports are necessary, PLA is fine, but I recommend ironing all the All top surface with PETG if possible.…
To introduce a heartier base and make it compliant with my other storage solutions in Gridfinity, added the original to a Gridfinity base. Attempted my print with the Cura tree supports… not the best outcome. May have better success with…
This funnel threads onto the NeilMed Sinus Rinse bottle (https://shopca.neilmed.com/products/sinus-rinse-kit-with-50-packets) and aids in filling with distilled water. (Often, distilled water is purchased in large jugs that are difficult…
Designed to hold the NeilMed bottle and cap so that they can drain and air out after use.
Printed with supports at 30°, came out great.
Hi I've created a variant for mounting the filament sensor close to the print head, and also created a variant compatible with the Mantis cap.
Schachtel mit Deckel für einzeln verpackte Kleinbildfilme. Die Schachtel ist in 4 verschiedenen Größen erstellt. Für 4 Filme, für 6 Filme, für 8 Filme und für 10 Filme. Gedruckt mit PLA ohne besondere Einstellungen. ……………………… Box with lid…
Built from the ground up for the bottle and nozzle to fit on a 2x3 gridfinity plate with minimal touch points and opportunity for bacteria retention/growth.
Schachtel mit Deckel für einzeln verpackte Mittelformatfilme. Die Schachtel ist in 4 verschiedenen Größen erstellt. Für 4 Filme, für 6 Filme, für 8 Filme und für 10 Filme. Gedruckt mit PLA ohne besondere Einstellungen. …………………………… Box…
Original made by ad1k4h on Thingiverse: https://www.thingiverse.com/thing:3768317 NOTE: I'm new to 3D Modeling, and this is my very first 3D Printable Model. This is a cube box for ESP32-EVB board. Buttons are not booled from the top…
Mounts for both the top and the bottom of the NeilMed Sinus Rinse bottle for the Honecomb Storage Wall system
Just tinkering with blender and this is the first go at it.
The extruder mount was to thick to mount my Titan so its little smaller with a small brace. Never used tinkercad so it is what it is lol. (This is made to mount on the RIGHT side,Mirror if you would like it on the left side like in the…
This is a remix of the Wailmer Watering Pail made by InducedRug.
Easily mount your NeilMed sinus rinse bottle to the wall or the back of a door to let it easily dry between rinses. Design focuses on minimizing the surface area that touches the bottle and nozzle so that it does not accumulate bacteria…
It can be printed in color with 3 filament swaps. The print files use variable layer height. If you use 0.2mm layer height, the swaps should happen at: Wailmer Keychain and Wailmer Keychain Stronger Attachement 2.0mm, 3.0mm, 4.4mm Wailmer…
I wanted a simple tray to hold the packets for my nasal rinse bottle packets and vials that I have to mix in with the solution. Here's a variation of my other nebulizer vial holder that fits my needs. May not be what you need but if it is…
This base is designed to keep your NeilMed bottle clean and organized, serving as a platform where you can place the bottle either upright or upside down, depending on your preferences. It is necessary to use double-sided adhesive tape to…
A caddy to neatly hold Neilmed sinus wash packets for travel. Will easily hold 12. If printed in TPU, you can squeeze an extra packet into each slot, for 16 total. I printed mine in TPU. PLA will also work, but the walls are rather thin,…
Mit diesem Haken kann man die flachen Filmklammern aus Edelstahl am Handtuchhalter anbringen. Paßt für Stangen bis 12mm. Gedruckt wie auf dem 2. Bild liegend mit Stützmaterial für den runden Haken. …………………………. With this hook you can…
The Kilmeleon is a model from KilCreative Designs, created as a playful mascot for enjoyment.
I recently had a ton of drilling and what not in my nose, wanted to promote good drying. This rack should do it. I'm not affiliated with Neilmed and have no idea if after 20 years your brain will explode from using this. Use at your own…
This is to help the bottle of the NeilMed Sinus Rinse dry completely between uses.
Uploaded from Thingiverse Designed this wailmer pail since I printed a Bulbasaur planter for my girlfriend but couldn't find any Pokemon themed watering cans so I decided to create my own. Print Settings Printer Brand: LulzBot Printer:…
a 3d printed filment orgenaizer for 2 spools of 1 kg, only pla, with out support and easy assembly
Schablone damit man das Filmende spitz zuschneiden kann um es in den Schlitz der Selbstlade Filmspulen einzufädeln. Passend für die nachladbaren Nikon Filmspulen. Mit etwas Übung geht es auch im Dunkeln ;-) Gedruckt mit PLA,…
this is the original filament holder of the micromake delta printer Print Settings Printer: micromake Rafts: No Supports: No Resolution: 0.3 Infill: 50% Category: 3D Printer Parts
#EN Railement / Derailement / Track-to-Surface ramps for wooden railway. It is compatible with IKEA LILLABO and BRIO and maybe other brands as well. Allows to easily drive your cars and trains from floor to the rails and back. (Check my…
I wanted a simple tray to hold the packets for my nasal rinse bottle packets and vials that I have to mix in with the solution. Here's a variation of my other nebulizer vial holder that fits my needs. My pharmacy changed and the vials I…
Broke my original cup and having a hard time finding replacement cup. This cup is designed for Gen 2 (Sinugator with 2 buttons) , have not tested on Gen 1 (Sinugator with 1 button). This design have 3 notches on the outside, 1 notch is…
a simple filment drying gaget very easy to print use support for vent preffably use PETG
✅ What’s new in V3 This V3 version introduces a true auto-centering roller geometry , inspired by real mechanical guiding principles: 3° inward taper (convergent draft angle) Larger diameter at the center Smaller diameter toward both ends…
Adapted the model with a PTFE coupling and Zscrew protector. Category: 3D Printer Parts
Filmet wall holder for 1x1kg or 1, 2kg spool.
Um ein Samsung Galaxy J5 2016 in eine 5,25 Zoll Disketten-Possobox einzuhängen zum "von-oben-Filmen" Praktischerweise kann man damit die Position der Aufnahme ändern, wenn man die Schublade auf der Box entsprechend herauszieht. Das J5…
Crossbow filament cutter Actuation arm For Voron 2.4 with plastic X/Y joints
This is a simple box that sits on top of a NeilMed HydroPulse Neo that has space to store the salt packets or other things you might need. The top is a little loose but that makes it easy to lift on and off. It has ventilation holes. This…
this clip will hold your slica gel on your spool of filiment to keep it dry recommended to print 2
A simple cap (toque?) for the bottle to preserve sterility once boiling water is added to the bottle. Specific need: since it takes time for boiling water to be "sinus temperature", oftentimes I end up forgetting the bottle on the…
Filment guide for 1x1kg holder, Holder is on my page to download.
Print the model like the original , .2mm layers, no brim. The holder fits in the bracket stands (mirror or stand-alone) on the original's page.
Print 2 of these and you can use both of them to remove broken fulfillment. it should just barley fit in the U1s print volume
very cool to put your filment poop in it
mounts on the mirror and gets it out of the way of your bathroom clutter. Bought to you by the nasty flu i've had over the last few weeks. no brim, .2mm layers, whatever material works for you V3: Completely redesigned for better…
Digimon Ikkakumon to print in one piece. Print settings below. Thanks for stopping by :) Model for personal use only. NO comercial use. Link to Patreon :) patreon.com/Artoys3dPrint Ikkakumon de Digimon a imprimir en una sola pieza. Abajo…
