P
Printablesdx29
AIROH commander GOPRO MOUNT
艾罗指挥官戈普罗坐骑
- Pobrania
- 403
- Polubienia
- 13
- Ocena
- 5
Wyniki wyszukiwania: iroh
Liczymy pasujące modele…
P
PrintablesAnt
Chim camera mount for Airoh Aviator helmet
A chin mount made over a 3d scanned model. Requires adhesive tape or another type of adhesive (glue or whatever). prints without support Before applying the tape check the fitting, you might want to file some areas slightly.
- Pobrania
- 243
- Polubienia
- 6
- Ocena
- 0
P
PrintablesAbsolutezer0x_x
Uncle Iroh/ White Lotus/ Jasmine Dragon coasters set from Avatar The Last Air Bender
Coaster set based on Uncle Iroh's tea house "The Jasmine Dragon" and the White Lotus group. Note: The Tea house Window v2 should fit in the coaster holder with no issue however I haven't had a chance to test it yet. Reach out for any…
- Pobrania
- 237
- Polubienia
- 38
- Ocena
- 4
P
PrintablesFilo07filo3d
viti casco airoh
2 viti di ricambio per un casco airoh modello motocross con lunghezza vite 9.5
- Pobrania
- 158
- Polubienia
- 9
- Ocena
- 0
P
PrintablesGuillermo Linares
GoPro Chin Mount for Airoh Helmet GP550s
Fits the Airhoh GP550s helmet like a glove, you will need additional 3M VHB 4991 2.3 mm adhesive. For best results use PETG for added strenght and the following settings: 4 walls 45% Infill Enable support You can leave the remaining…
- Pobrania
- 144
- Polubienia
- 6
- Ocena
- 5
P
Printablesomiedude
Avatar Uncle Iroh Magnet (8x3mm magnets)
- 8x3mm magnets to be glued in - 15% infill used in example - Big Note on this print: I used a layer modifier to add ironing from 3.5-4.5mm. This allowed for better quality of the outline, to avoid gaps etc., without ironing every top…
- Pobrania
- 129
- Polubienia
- 30
- Ocena
- 5
P
PrintablesCristian Panayotti
Strong Hook Airoh
this is a remix of a user who created 63 hook models. this is only for airoh helmet
- Pobrania
- 42
- Polubienia
- 3
- Ocena
- 0
P
PrintablesGiovanni Daniele
Air Vents for Airoh helmet GP550s
During a motorcycle ride, I lost one of the air vents on my Airoh gp550s helmet. I made a 3D scan of the original air vent (the one I still had attached) and recreated it with 3D printing. For printing I used adaptive layers in the…
- Pobrania
- 35
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDORLOCK
Airoh Commander 2 Helmet Spacer for SENA SHARK Intercom
Custom spacer pad designed to provide proper mounting clearance for SENA SHARK intercom systems on Airoh Commander 2 helmets. This adapter ensures secure fitment and optimal positioning of your intercom control unit.
- Pobrania
- 32
- Polubienia
- 1
- Ocena
- 0
P
PrintablesKamikaze Designs
Uncle Iroh Inspired Chibi
This is my take on Uncle Iroh from Avatar: The Last Airbender. You may need to rescale this design to fit your needs.
- Pobrania
- 27
- Polubienia
- 6
- Ocena
- 0
P
PrintablesNikolay Severov
Airoh Helmet Gp550s replacement
scanned on phone, smoothed a bit, glued together for further processing and painting. Be careful on the roads. Add 0.5% for shrinkage. PETG. 0.2 my friend, who was in an accident, is a painter and is now painting these parts and the whole…
- Pobrania
- 26
- Polubienia
- 0
- Ocena
- 0
P
PrintablesKOMPOTKO
Gopro mount for helmet Airoh Terminator
Gopro mount for helmet Airoh Terminator
- Pobrania
- 25
- Polubienia
- 2
- Ocena
- 0
P
Printablesomiedude
Iroh Avatar Magnet (multi-color)(8x3mm magnets)
Pictured Examples printed on a BambuLab X1C (Textured PEI) Face-down Print Settings: Initial Layer Line Width: 0.4mm Wall Generator: Arachne Wall Loops: 1 Bottom Surface Pattern: Hilbert Curve Infill: 15% (Gyroid) Initial Layer Speed:…
- Pobrania
- 20
- Polubienia
- 5
- Ocena
- 0
P
Printablesvwoli3d
Avatar The Last Airbender - Iroh and Zuko
Hueforges can be resized, only change the X and Y scale, leave the Z height the same. Avatar The Last Airbender - Iroh and Zuko Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.4x200mm in…
- Pobrania
- 19
- Polubienia
- 12
- Ocena
- 0
P
PrintablesS0und_Lab
Avatar The Last Airbender Uncle Iroh Tea
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.33x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual…
- Pobrania
- 13
- Polubienia
- 5
- Ocena
- 0
P
Printablesvwoli3d
Avatar The Last Airbender - Iroh Leaves from the Vine
Hueforges can be resized, only change the X and Y scale, leave the Z height the same. Avatar The Last Airbender - Iroh Leaves from the Vine Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is…
- Pobrania
- 12
- Polubienia
- 8
- Ocena
- 0
P
PrintablesDORLOCK
Battery Box for Airoh Commander 2 Helmet - SENA SHARK Intercom
This is a battery box model designed for mounting on the Airoh Commander 2 helmet when using a SENA SHARK intercom system. The box serves to protect and secure the intercom battery on the rear of the helmet and precisely follows the…
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPepe
AIROH Stryker Halter für Ersatzschrauben und Beilagscheibe
Halter für die Ersatzschrauben zum Ankleben am Helm und verbesserte Beilagscheibe. Damit hat man immer Ersatz dabei.
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
Printablesvwoli3d
Avatar The Last Airbender - Iroh Poster
Hueforges can be resized, only change the X and Y scale, leave the Z height the same. Avatar The Last Airbender - Iroh Poster Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.4x200mm in size…
- Pobrania
- 10
- Polubienia
- 8
- Ocena
- 0
P
PrintablesCriogh
Airoh Spark 2 black spoiler
(I don't know the proper name of this thing) Mine broke after a 20 cm drop and noticed that air was going between my jacket and my neck. I added a feature that allows to grab the helmet with two fingers
- Pobrania
- 7
- Polubienia
- 2
- Ocena
- 0
P
Printableshanuss
IroP Iroha Sakayori fox mask Cosmic Princess Kaguya!
Printable model of Iroha Sakayori IroP mask from anime Cosmic Princess Kaguya.
- Pobrania
- 4
- Polubienia
- 1
- Ocena
- 0
P
Printables
Airoh Spark 2 black spoiler
(I don't know the proper name of this thing) Mine broke after a 20 cm drop and noticed that air was going between my jacket and my neck. I added a feature that allows to grab the helmet with two fingers
P
Printables
Airoh Commander Helmet Hole Cover Taps
When you want to transform your Airoh commander helmet into a naked version, without visor, you need to purchase plastic taps that are not included in the package. The holes are not sharp, so I created 3 different measures. Attached…
P
Printables
Iroha
Iroha is a Japanese poem used as a learning aid. It contains every letter of the Japanese syllabary https://en.wikipedia.org/wiki/Iroha Although its scent still lingers on the form of a flower has scattered away For whom will the glory of…
P
PrintablesJulian Danzer
Samurai Shodown Iroha Swords
A 3d printable model of the swords used by Iroha from the videogame Samurai Shodown This includes both a full model as well as one split into 6 parts for assembly using 4mm support rods
- Polubienia
- 0
- Ocena
- 0
P
Printables
Airoh Rev 19 camera chin mount
Mount for GoPro / SJCam camera on the Airoh Rev 19 flip-up helmet. It allows for a centrally mounted, downward-facing (180 degrees) camera position while still providing access to the visor latch. I designed it because the mounts supplied…
P
Printables
Pinlock for airoh helmet
The original Airoh pinlocks are quite fragile and tend to break easily. I’ve been using this one for two years now, and
P
Printables
Airoh Commander Helmet
This model is based om the Airoh Commander 2 and is not a detailed version. I made the model myself in Blender. I don't have a specific print setting saved, so just try it out and see what's best for you
P
Printables
Airoh Pinlock Pin
I modeled these pin using the Originals from my helmet. Print with the smallest resolution your printer allows. Print outside.stl sideways to increase strength. Category: Automotive
P
Printables
Hook Airoh
this is a remix of a user who created 63 hook models. this is only for airoh helmet
