P
PrintablesKlopfer85
FC Carl Zeiss Jena Logo
Das Modell wurde von mir erstellt, viel spaß damit.
- Pobrania
- 70
- Polubienia
- 2
- Ocena
- 0
Wyniki wyszukiwania: jena
25 modeli
P
PrintablesLeDomme
Ikea Tjena Labelholder
The IKEA Trjena Boxes do not have any place for labeling without potentiality damaging the box. So I thougt ftijpi. I created one for the big boxes with a grip hole and for the smaller ones without. Print Settings Printer Brand: Anycubic…
- Pobrania
- 43
- Polubienia
- 9
- Ocena
- 5
P
PrintablesBaghwan
Full set of 33mm darkfield apertures for Zeiss Jena and LOMO Microscopes
By putting these little apertures inside the color-filter tray you can reach an enormous increase of contrast. Each lens needs it's own aperture diameter for optimal results so I made a set I recommend to print in black filament and…
- Pobrania
- 34
- Polubienia
- 5
- Ocena
- 0
P
PrintablesDaniel Kasprowicz
Scope cover for Carl Zeiss JENA ZF4
Scope cover for Carl Zeiss JENA ZF4 Sunlu TPU is a great choice, but should work with any FLEX filament. For other diameters, just change the scale.
- Pobrania
- 24
- Polubienia
- 1
- Ocena
- 0
P
PrintablesAktalion
Jena - Coat Of Arms
This is the coat of arms of the city of Jena, located in Thuringia. Tags: Wappen
- Pobrania
- 22
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMark
jena ridens hueforge
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyTerra Fossil Grey Transmission Distance: 2.2 PLA azurefilm White Transmission…
- Pobrania
- 19
- Polubienia
- 5
- Ocena
- 0
P
PrintablesPatrick G.
Stift Organizer IKEA TJENA
Organizer für IKEA Schreibtischorganizer TJENA
- Pobrania
- 18
- Polubienia
- 0
- Ocena
- 0
P
Printablesblechbude
Gegenlichtblende für Zeiss Jena Flektogon 50mm f4; Lens hood for Zeiss Jena Flektogon 50mm f4
Gegenlichtblende für Zeiss Jena Flektogon 50mm f4, Gewinde M 86x1. Zwei verschiedene Ausführungen, drei verschiedene Längen. Die konische kann ohne Supportmaterial gedruckt werden, die zylindrische benötigt Stützen. Den Teil mit dem…
- Pobrania
- 17
- Polubienia
- 3
- Ocena
- 0
P
Printablestecs
Carl Zeiss Jena MC Sonnar 180 mm f/2.8 lens mount for quick release plates
This part is not structural or load-bearing - it just fills in the gaps between your mount and the lens, improving grip and resisting to rotation and unscrewing. The model is intentionally very snug, but the lens is sturdy enough to…
- Pobrania
- 17
- Polubienia
- 3
- Ocena
- 0
P
PrintablesByPS128
Display stand for Jena 1D nitro engine
The highly desirable and reliable Jena 1D two-stroke internal combustion engine designed for aircraft. It was produced in the GDR in the years around 1960. It was the smallest of its kind. I have one of these left over from long ago and…
- Pobrania
- 15
- Polubienia
- 2
- Ocena
- 0
P
Printablesjbtronics
Carl Zeiss Jena Microscope objective adapter from M19x0.75 to M27
GDR's Carl Zeiss Jena used a special non-standard thread of M19x0.75 for their infinite tubus length objectives. This adapter allows to use it in modern M27 threaded microscopes. Use PLA and a fine layer height of at least 0.1mm for…
- Pobrania
- 12
- Polubienia
- 3
- Ocena
- 0
P
PrintablesTopo Mapper (Stadtplaner)
![[TopoExport.com] Jena.obj + Jena.dxf](https://media.printables.com/media/prints/1211861/images/9215317_d20ae252-6b2d-45f6-aa5b-6ff4b75dcc74_7f1a0692-6ff8-4ecd-b76a-3a92814cec7f/topoexport_jena-3.png)
[TopoExport.com] Jena.obj + Jena.dxf
TopoExport Jena.obj near Gera, Erfrut and Gotha made with topoexport.de (https://topoexport.de/). GDI-Th 3D-Gebäudemodell LoD2 Bâtiments LoD2 2020 - 2024 DL-DE/BY-2.0 GDI-Th ALKIS Parcelles 2024 DL-DE/BY-2.0 GDI-Th DLM Routes 2024…
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSennaro
Lens cap 66mm (for carl zeiss jena lens 135mm)
1 perimiter 10% infill (I used cubic) 95A Shore TPU from 3DJAKE Fits and holds it perfectly, simple model 40min print.
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
Printablesaottesen
Carl Zeiss Jena Microsoft LifeCam Adapter
Small adapter ring for fitting Microsoft Lifecam to an Carl Zeiss Jena microscope. Works like a charm! Category: DIY
- Pobrania
- 10
- Polubienia
- 1
- Ocena
- 0
P
PrintablesYourBrainEatsYou
IKEA Tjena / Fullfölja Insert-Lowering Clips
These are simple 3D-printable side hooks for IKEA Tjena / Fullfölja boxes, allowing you to position the inner insert lower inside the box. Printing notes No supports required Prints fast and clean PLA is sufficient, PETG also works…
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
PrintablesShoma
tripod K&F concept adapter for lens Carl Zeiss Jena DDR Sonar 2.8/200 mm
tripod K&F concept adapter for lens Carl Zeiss Jena DDR Sonar 2.8/200 mm , for balanced position on tripod. holds on front side (87 mm) of the lens, adapter wide is 37 mm Print 0.4 mm nozzle without X/Y compensation. Additional Two 4 mm…
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
Printables
Carl Zeiss Jena Microscope objective adapter from M19x0.75 to M27
GDR's Carl Zeiss Jena used a special non-standard thread of M19x0.75 for their infinite tubus length objectives. This adapter allows to use it in modern M27 threaded microscopes. Use PLA and a fine layer height of at least 0.1mm for…
P
Printables
Gegenlichtblende für Zeiss Jena Flektogon 50mm f4; Lens hood for Zeiss Jena Flektogon 50mm f4
Gegenlichtblende für Zeiss Jena Flektogon 50mm f4, Gewinde M 86x1. Zwei verschiedene Ausführungen, drei verschiedene Längen. Die konische kann ohne Supportmaterial gedruckt werden, die zylindrische benötigt Stützen. Den Teil mit dem…
P
Printables
tripod K&F concept adapter for lens Carl Zeiss Jena DDR Sonar 2.8/200 mm
tripod K&F concept adapter for lens Carl Zeiss Jena DDR Sonar 2.8/200 mm , for balanced position on tripod. holds on front side (87 mm) of the lens, adapter wide is 37 mm Print 0.4 mm nozzle without X/Y compensation. Additional Two 4 mm…
P
Printables
Label for IKEA TJENA and other storage boxes
Label for IKEA TJENA and other storage boxes This label can fit a 32 x 57 mm sticker and can be used on IKEA TJENA storage boxes and other with the same wall thickness
P
Printables
Ikea Tjena box label holder and handle
The last generation of Ikea home storage small boxes, unless you spend a fortune, the basic ones are proper basic. They don't even have a dedicated space for a label… think of years ago when they would actually have a small metal window…
P
Printables
Bottle insert for Tjena
This is an insert for the IKEA Tjena box to store Vallejo bottles. You can store up to 90 17ml bottles in one Tjena box and you have always the perfect overview of all your paints. No more searching through the mess of many bottles in one…
P
Printables
IKEA Tjena Folder Filament Holder
My girlfriend didn't like how I had spools of filament scattered everywhere. She asked me If I can't hide them in the files above my desk. Of course I can. I can even print a holder into them and print directly from them. It is designed…
P
Printables
Back Stops for IKEA KALLAX inserts like BLÄDDRA, TJENA, REGNBROMS, FYSSE, KUGGIS etc.
Some of IKEAs inserts for KALLAX are not screwed in, so if you for example push a drawer from BLÄDDRA in too far, you can push the hole insert out the back. To stop this from happening I designed some simple parts to screw or glue on. You…