Wyniki wyszukiwania: jura

Jurassic park gate

Check out my patreon www.patreon.com/wekster

Jurassic Park Raptor Cage

Jurassic Park Raptor Cage at 1/18 scale.

Jurassic Park Token&Medal

Jurassic Park token and medal, easy as multicolor prints (Jurassic Park or World)

1:18 Jurassic Park SUV

1:18 SUV from classics dino movie. Compatible with 3.75 inch figure and Super Colossal T.rex toy from Jurassic World Series. Disclamer: Contains small parts and requires high precision. Your printer may need to be properly calibrated for…

Jurassic Park Barbasol Cryotube Can Remix

So I did a thing!!! I have had Cadcat’s Barbasol Jurassic Park Cryco Can model for some time but never printed it because it’s, shall we say, not very screen accurate. I found on Amazon an actual Barbasol Stash box can and thought it’s…

Jura E8 coffee bean expansion (now for old and new Model E8)

the normal jura coffe bean container is too small for our use :-) fit on Jura model E8 older model, please measure first!!!! old E8 = 130 x 132 mm .ca new E8 = 152 x 132 mm .ca add a higher version, now 45mm and 60mm for more coffee :-)…

Jurassic Park Logo (multi-material)

Multi material version of the Jurassic Park logo. Download all the STL files, then select them all at once and drag them into PrusaSlicer. It will ask to consider them as a single object with multiple parts, say yes. Then assign the…

Dinosaurs T-rex Jurassic lightbox

COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE AQUÍ: correo de contacto:…

Jurassic Park Logo 2D Art

With a partner, you will design a “2D” placard using SolidWorks. You and your partner will have the same design which meets the constraints below, and you will EACH use SolidWorks to create your design. Assembly/ Construction: Place the…

Jurassic Park Coasters

Can you believe Jurassic Park is still around after almost 30 years? The latest film was fun, and it was good to see the original cast back. Anyway here are a couple of Jurassic Park coasters. V1 the T-rex is recessed. V2 the T-rex is…

Jurassic World Logo

Jurassic World logo in 3D. 5mm high.

Jurassic World Camp Cretaceous Bumpy

Jurassic World Camp Cretaceous Bumpy

Jurassic Park Velociraptor

Jurassic Park Velociraptor 3D model, sculpted by me in NoMad Sculpt. I recommend using a Resin Printer if you want to print the model.

Jurassic Park Visitor Center

Jurassic Park Visitor Center Don't forget to change size! Don't forget to use supports!

Jurassic Park Headphone Stand or Ornament

Jurassic Park Headphone Stand Print the top with supports touching buildplate

Jurassic Park Logo - Multicolor

Jurassic park logo multicolor print for all types of FDM printers (also without AMS or color switcher)

Jurassic Park Gates

We really dug into the Jurassic Park theme this 3D Printopia, formerly known as ERRF. CM Designs created a big Jurassic park gate for the event! He then shrunk it down for everyone to print with ease! You will need to print 2 pillars, 2…

Jura E8 Kaffeeautomat Schlauchhalter

Schlauchhalter für Kaffevollautomat Jura E8

Jurassic Park Logo Wall Art

A great Wall Art of Jurassic Park Logo. Not very original as there are already many others, but just with teeth attached to the rest and bottomless. Do not forget to upload your makes, thanks ! Inspired by a sticker

John Hammond's Cane, Jurassic Park

Measurements and shape taken from the screen-used prop. Completed cane with an amber topper is approximately 840mm/33" long--the appropriate height for someone the same height as Richard Attenborough--so scale the Z dimension of the spine…

Jurassic Park Cryo Canister - Functional

This is a functional and screen-accurate Cryo Canister from the first Jurassic Park movie. Most of the credit goes to BadWolfProps which made the original files and coffeehedake which remixed the middle cylinders to be the right size from…

Jurassic Park Lightbox - Led Lamp

More models and seller license at ----- https://www.patreon.com/Valda3DPrinting A multicolor 3D model of Jurassic Park logo lightbox You will find each file named by color for an easy setting. Import them in Bambulab/Orca as single object…

Milchschlauchhalter für die Jura E8 - Holder for the milk tube of the Jura E8

Milchschlauchhalter für die Jura E8 holder for the milk tube of the Jura E8

Jurassic World Logo

Logo du film JURASSIC WORD, imprimable en deux couleur pour un meilleur rendu.

Jurassic Park Shadow Box

"Welcome to Jurassic Park - John Hammond" In this captivating shadow box, a scene from the iconic Jurassic Park movie comes to life. The famous entrance gate looms large, a towering monolith adorned with the park's emblematic name. A car…

Jurassic Park Kitchen Scene

Perfect as a first Diorama

Jurassic Park - Dennis & Dilophosaur Scene - 1990

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Jurassic Park Barbasol CryoCanister

A replica of the movie prop that fits in a stash canister

Jurassic Park Cryo Can

I purchased this Barbasol can and used sand paper to remove the bottom lip so the inside parts would fit. For the vials I purchased these and used an hobby knife to cut off the cap. O-Ring Spring

Jura E55 Imperssa watertank cover replacement clip

This is a replacement clip for a Jura E55 Impressa watertank cover. The clips often break if you hit the cover with the watertank. To replace the clip, you have to cut of the wider part of the broken clip (marked in red). After that, the…

Jurassic World

Jurassic Park Key chain Print Settings Printer: Artillery genius Rafts: Doesn't Matter Supports: No Resolution: 0.2 Filament: Pla Kimya PLA Category: 3D Printing

Jurassic Park logo outline cookie cutter

Jurassic Park logo outline cookie cutter

Jurassic Park - Dr. Alan Grant - 1990

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Jurassic Bawk Chicken Sign

Jurassic Bawk sign, extruded at 4 layer heights in order to either manually swap colors at different heights (which I did), or to manage color changing layers using an AMS/MMU. Prints just fine under normal 0.2 settings with 15% grid…

Jurassic Park - Sick Triceratops Scene - 1990

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

AT-REX - Jurassic Wars

I really like the at-at design and dinosaurs so I spent a couple of month in Fusion 360 to do a supid idea I've seen on instagram. Behold the mighty AT-REX! If you like the At-REX, you can make donation to paypal.me/quentinmachiels…

Jurassic Park Gate

Jurassic Park Gate

pendant/earrings Jurassic Park

PLA. Nozzle/boquilla 0.2mm Layer/capa 0.15mm

Jurassic World Mosasaurus

Overview What happens when a grandpa with a 3D printer decides prehistoric sea monsters belong in the toy box? You get this Mosasaurus. This model is inspired by the giant marine reptile featured in Jurassic World , where the Mosasaurus…

Jurassic World Style Fence

its a Jurassic World style fence. i used bamboo skewers for the horizontal poles but i included a model with the correct

Jurassic Park Keychain

model designed to be used with the m600 command I hope you like it

Jurassic Park logo badge (fan art swap at layer height)

Print at 100% infill with a layer height of 0.16mm with a base layer of 0.24mm Filaments Used: PLA Bambu PLA Matte Charcoal Transmission Distance: 0.6 PLA Bambu PLA Matte Scarlet Red Transmission Distance: 1.5 PLA Bambu PLA Basic Yellow…

Jurassic World Sign

Just a basic sign I wanted for my wall. I couldn't find any that fit the bill quite like I wanted, so I made my own. Each of the major piece's end at different layer heights so if you dont have an MMU/AMS system you can colorize it by…

Allosaurus Jurassic Park

Allosaurus Jurassic Park

Jurassic Park - Dr. Ellie Sattler - 1990

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Jurassic Park - Dr. Ian Malcolm - 1990

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Jurassic Park - Dinosaur Supervisor, License Plate Frame

Jurassic Park - Dinosaur Supervisor, License Plate Frame Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 25 Category: Signs & Logos

Jurassic Park - Timmy Hides from Raptor - 1990

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Jurassic Park Keyring 3 colors

Using the coaster file (the V2 with the raised T-rex) I played around with dimensions to get better suited size and still maintain nice details. Then used Microsoft 3D builder to modify the stl and add the keyring “loop”. Slicing : 0.2…

Jurassic Park logo

Khajuraho Temple Relief.

Khajuraho Temple. This video demonstrates the technique used. First make your pic with Gemini AI. Then use GitHub - BillFSmith/TilingZoeDepth to create the depth map.

Jurassic Park - John Hammond - 1990

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Jura impressa S95/S90 Brew Unit Motor Gear

Brew Unit Motor Gear For Jura Impressa S95/S90

Jurassic Park - Brachiosaurus Scene - 1990

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Jura coffee machine waste bucket replacement (C, D, E & F series)

This is a simple replacement waste bucket for Jura coffee machines: Jura D4 / D6 / D60 Jura Impressa C Limited Edition Jura Impressa C5 / C50 / C55 / C60 / C65 / C70 / C75 / C9 / C90 Jura Impressa E10 / E20 / E25 / E30 / E40 / E45 / E5 /…

Jura Ena Micro 9, brew unit, geared part

It was a tiny part with gears inside the brew unit that was broken. The part wasn't possible to buy without buying the whole brew unit and it would have cost aprox 200$ . I designed it in Fusion 360. Tried to make a copy as close as…

Jurassic World Spinoceratops

Jurassic World Spinoceratops

Visitor Center - Jurassic Park

- WELCOME TO JURASSIC PARK - In 1993, Jurassic Park shook the world of film, pop culture and even paleontology. As a long-time fan, Dany Sánchez of MiniWorld3D has finally created our version of the Visitor Center, with the distinct seal…

Jurasic Park Coaster multi color

No change to the V2 version of the model i remixed other than posting the color changes for prusa slicer.

Jurassic World logo

The Jurassic World logo

Jurassic World Camp Cretaceous Toro

Jurassic World Camp Cretaceous Toro

Jura 69998 Case

Jura 69998 Motor Case for C/E/F/J/X/Z Series Fits for Jura: 201 Impressa C5 Impressa C50 Impressa C55 Impressa C60 Impressa C65 Impressa C70 Impressa C75 Impressa C9 Impressa C90 Impressa D4 D6 D60 E10 Impressa E20 Impressa E25 Impressa…

Jura Impressa drainage valve cap

This part slips onto the drainage valve of Jura Impressa, AEG Cafamosa and Krups Orchestro and Siciliana models. Tested on a Jura Impressa S75. The original cap breaks after a few years, which causes dry ground coffee to be ejected into…

Jurassic Park Logo for MMU/AMS

I created this Jurassic Park logo specifically for multi-material printers. The pieces have zero gap and must be printed in place. I've included the original .blend file for your editing pleasure. Happy printing!

Jurassic Park Toilletten Schild Restroom

Toilettenschild aus den Jurassic Park Filmen Alle Farben könne einzeln gedruckt werden oder ihr nutzt die Datei mit zwei Farbwechseln (blau, schwarz, weiss) Die Datei habe ich für den MK3s auf 80% skaliert.

Jurassic Park Jeep Printable Mouldings

To bond these to the collar, I used 2 part epoxy and bondo to fill the gaps. sanded it down and painted it using black automotive primer then flat black for that "Rubber" look. I disassembled the light completely to paint them…

Jura E8 milk tube mount

I saw someone selling this for ~$10 on eBay and wanted to model it myself (to keep my $10 richer as well as post here in case anyone else had an E8). It might work on other model Jura's, I have no idea. I printed using Overture PETG with…

Jurassic World Remote Control Holder

I made this holder a little on the small side to fit some smaller remotes we have. Scale it up for bigger remotes! Glue the face plate on the holder.

Tassenauflage Cup rest Jura E8

The support on the Jura E8 is too small for a cappuccino cup Die Auflage der Jura E8 ist zu schmal für eine Cappuccino Tasse It would be nice if you post your make. Thank you

Jurassic Park Monopoly Accessories

I started out just printing out the fences for Jurassic Park Monopoly but couldn't stop there. I designed boxes for each of the different cards and a money holder, you know all stuff that should have been included with a $60 board game.…

Jurassic world pendant

Printsettings: Nozzle 0,4 No raft 30% infill 0,1mm layer height ironing - on

Jurassic Parkl - HueForge

Hey friends, here's my latest model. You can change the size of the X and Y axes, but DO NOT change the Z axis. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Start with Black At layer #12 (1.04mm) swap to…

Jurassic World Lamp

Jurassic World lamp (lampshade).

Jurassic Park Logo for MK4IS single extruder

Filament change at 2,2mm 3,2mm 4,2mm Start with black 2,2mm change to yellow 3,2mm change to white 4,2mm change to red You can of course slice it also for other printer models

gear for coffee machine like Jura // Kaffeevollautomat - Zahnrad für Antriebsmotor

my gear is broken because of the age of my coffee machine (more than 10 years) .. so i had the choice to buy on new one and drink no coffee the next days because of delivery .. or to design a new one an print it .. i took the second…

Dilophosaurus Skull Bust – Jurassic Dinosaur Sculpture

Highly detailed Dilophosaurus skull bust with the iconic neck frill, inspired by prehistoric reptiles.

Jura Gear - Brew group guide gear

Replace your worn out gear for the brew group guide on your Jura ena micro 9. Printed in PLA in working condition after sanding.

Jura Lid clamps

This is a replacement for broken clamps on your Jura C5 water container and coffee tray lids. Remove the leftovers from the old clamp and glue this one in place. I've printed it with PETG (0.20mm quality) 50% infill. Takes about 10…

Jurassic World - Velociraptor

I do comprehensive 3D scanning and you can see some of my results here. The models are partially edited with AI due to small or missing details. If you are interested in my work and have a specific interest, you can write to me and my…

Jurassic park keyring with backing

Simple remix that adds a base to the original, making it more durable. The downside is that it's only viewable from one side. Add a colour change to make things stand out. Category: Keychains

Collets for GRS / Jura inside ring holder

I needed additional collets for the Jura by GRS inside ring holder because I drill into them a lot and abuse them mercilessly. This way I can print new single ones without having to buy a whole new set each time to get the ONE I generally…

Jura A1-A5-A7-A9-ENA Micro Coffee Grounds Container

Someone (occasionally) discarded original coffee ground box from Jura coffe machine at our lunchroom and I've modelled and printed a replacement using pictures from coffee machine manual. It works well at our Jura A1 machine. This is much…

Jurassic Park Wall Plaque – T-Rex Silhouette 15x20cm

Hey visitor, found your favorite film or TV show? Check out the full movie collection here: https://www.printables.com/@WalterSpanu_3005190/collections/2922712 Wall art plaque featuring the classic T-Rex silhouette from Jurassic Park,…

Jura J8 milk hose holder

Part is designed to clip onto the moving part of the milk frother. No Screws or glue needed. Printing parameters: Material: PLA / PETG Layer height: 0.2 mm Support recommended at the overhang, but not required.

Jura Accessories Storage Container

A compartmentalized storage container for Jura coffeemaker accessories. Compartments are sized and designed to store standard Jura accessories. The manual/documents on one side, and the other side is split in 3 compartments sized to…

Jurassic Park fence light (half-scale)

Display stand: https://www.printables.com/model/1384162-jurassic-park-fence-light-display-stand Materials used Blue and/or orange transparent PETG; Gray PLA (PolyTerra); Black PLA (PolyTerra); Arduino nano; WS2812b led strip; Wire; Hot…

Jurassic Park Logo Chromaphane

This is a Chromaphane of the OG Jurassic Park logo made using Lithophane Maker's Lithophane Maker Desktop software (LMD). A chromaphane is a type of filament painting (yes, it is similar to HueForge), but the way a chromaphane is…

Jurassic Park Wall Mount Headphone Holder

Wall mountable Jurassic park themed headphone holder, this utilizes a drop and slide mounting hole. There are two sizes, "Big and Small" which gives you flexibility according to the headphones you will be using. Category: 3D Printing

Jurassic Print Keychains

We really dug into the Jurassic Park theme this 3D Printopia, formerly known as ERRF. CM Designs created these 2 keychains to print. Included are files for the Jurassic Hex P and Jurassic Print keychain. Color changes are used to maken…

Coffee spoon and funnel that fits Jura machines

Not a clone of the original. This is a new design of my own.

jurassic park logo

added color

Jurassic World ACU License Plate Frame

a Jurassic World Asset Containment Unit inspired license plate frame. Model pre-cut to fit on Ender 3, Neptune 2 build plate.

Jura E8 Milchschlachhalterung

Milchschlauchhalter für die Jura E8 Die elegante Lösung Mich hat es gestört das der Milchschlauch unserer Jura irgendwo in der Schublade rum liegt deshalb habe ich diese Halterung entworfen. Sie passt in den vorhandenen Spalt an der E8…

Jura E60 Coffee Bean Tank Extender

This is a coffee bean tank extender for the Jura E60 coffee maker. It can hold up to one bag (1 kg) of beans, so no more half filled coffee bean bags in the kitchen. The design will use the original cover, so simply remove the original…

CACHE MOTEUR DE JURASSIC PARK CRÉALITY ENDER 3

Matériau PLA Buse de 0,4 mm 20% - 30% de remplissage Temps d'impression total : Hauteur de couche : 0.2 ~ 2 heures Hauteur de couche : 0.1 ~ 4 heures 30 min Matériel total: ~ 14 g

Jura S9 Brew Group Coffee Scraper

This is a replacement coffee scraper for my Jura S9 (original part looks like this: https://www.jura-parts.com/Jura-Brew-Group-Coffee-Scraper-Blade-V3-p/10051.htm ). The original one broke but I was able to measure it for dimensions and…

Jurassic Park John Hammond's Cane (no topper)

I designed this because I didn't look at thingiverse first. Only part 12 needs supports. 7.5mm rod for the center. I prefer threaded to grip onto the epoxy. Use a small file to add the "bone scratch" detailing. I wanted mine to look…

Jurassic Rabbit Park AMS version

Remixed so it can be used with an MMU system. The included .3FM file is a Bambulab file for Bambulab AMS users.

Jura Impressa C60 Pflegeschale

Die Auffangschale nutze ich, zum Reinigen und/oder Entkalken, meiner Jura Impressa C60 Kaffee Maschine. Dies ist mein erster Entwurf, in Freecad. Die Datei stelle ich zur Verfügen, falls jemand noch Anpassungen, für seine Maschine, machen…

Jurassic Park Bookend

This is a bookend about the movie "Jurassic Park". In the printing prosses you don't need any supports.